[Mon Jul  2 13:08:21 2012] Detection parameters:
  Position = (269.8, 292.8) = 14 58 33.54 -31 42 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.7 +/- 24.8
  Background counts = 112.9
  Rate = 0.006 +/- 0.0005

[Mon Jul  2 13:08:21 2012] Off-axis axis estimate = 2.12'
[Mon Jul  2 13:44:39 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 13:44:39 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Mon Jul  2 13:44:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Mon Jul  2 13:44:39 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.49"
[Mon Jul  2 13:58:36 2012] fullrun_mos2_xmm0067750101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jul  2 13:58:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0067750101_pi300-10000_cl_pass0_src3.csv
[Mon Jul  2 13:58:36 2012] fullrun_mos2_xmm0067750101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jul  2 13:58:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0067750101_pi300-10000_cl_pass0_src3.csv
[Mon Jul  2 13:58:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067750101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067750101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 13:58:36 2012] fullrun_mos2_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jul  2 13:58:36 2012] fullrun_mos2_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jul  2 13:58:36 2012] Fit fullrun_mos2_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jul  2 13:58:43 2012] Spatial fit model total counts = 474.999000, observed total counts = 475.000000
[Mon Jul  2 13:58:43 2012] Offset between fit and detection position for source 10 = 0.082969 pixels
[Mon Jul  2 13:58:43 2012] 471.529000 total counts/ 350.544000 bgd. counts: snr = 6.461900
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.082969 pixels
  Position = (269.8, 292.9) = 14 58 33.54 -31 42 9.3
  Extent = 3.5 (3.1-4.3)", rotation angle = 0
  Source counts = 121.0 +/- 21.7
  Background counts = 350.5
  Rate = 0.003 +/- 0.0006
[Mon Jul  2 13:58:43 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 13:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 13:58:43 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 13:58:43 2012] Source does appear to be extended
[Mon Jul  2 13:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 14:33:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  2 14:33:36 2012] Initial guess for spatial extent in simple fitting = 3.55"
[Mon Jul  2 14:33:36 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.867
[Mon Jul  2 14:33:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.55"
[Mon Jul  2 14:46:24 2012] fullrun_mos2_xmm0067750101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul  2 14:46:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067750101_pi300-10000_cl_pass1_src3.csv
[Mon Jul  2 14:46:24 2012] fullrun_mos2_xmm0067750101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul  2 14:46:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067750101_pi300-10000_cl_pass1_src3.csv
[Mon Jul  2 14:46:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067750101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067750101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:46:24 2012] fullrun_mos2_xmm0067750101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul  2 14:46:24 2012] fullrun_mos2_xmm0067750101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul  2 14:46:24 2012] Fit fullrun_mos2_xmm0067750101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul  2 14:46:30 2012] Spatial fit model total counts = 467.000000, observed total counts = 467.000000
[Mon Jul  2 14:46:30 2012] Offset between fit and detection position for source 10 = 0.002326 pixels
[Mon Jul  2 14:46:30 2012] 467.382000 total counts/ 345.536000 bgd. counts: snr = 6.554878
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.002326 pixels
  Position = (269.8, 292.9) = 14 58 33.54 -31 42 9.3
  Extent = 3.6 (3.1-4.3)", rotation angle = 0
  Source counts = 121.8 +/- 21.6
  Background counts = 345.5
  Rate = 0.003 +/- 0.0006
[Mon Jul  2 14:46:30 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:30 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 14:46:30 2012] Source does appear to be extended
[Mon Jul  2 14:46:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 15:29:19 2012] XMMSAS src. selection expression = ellipse(23421.944940, 25430.545400, 214.720806, 214.720806, 0.000000, X, Y)
[Mon Jul  2 15:29:19 2012] Writing source region out to fullrun_mos2_xmm0067750101_pi300-10000_pass1_cl_src10_src.reg
[Mon Jul  2 15:29:19 2012] Extracting stamp from image fullrun_mos2_xmm0067750101_pi300-10000_cl_sm2.00.img.gz, (257, 281) - (282, 305)
[Mon Jul  2 15:29:19 2012] XMMSAS bgd. selection expression = annulus(23421.944940, 25430.545400, 357.868010, 715.736021, X, Y)
[Mon Jul  2 15:29:19 2012] Writing fullrun_mos2_xmm0067750101_pi300-10000_pass1_cl_src10.gif
[Mon Jul  2 15:29:52 2012] Mean detx,y = (3709.79, -1234.29) 
[Mon Jul  2 15:29:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 15:29:57 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 15:29:57 2012] Setting source spectrum file to fullrun_mos2_xmm0067750101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul  2 15:29:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0067750101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jul  2 15:40:24 2012] Updating aperture counts using extracted products
[Mon Jul  2 15:40:24 2012] Error reading totcts from fullrun_mos2_xmm0067750101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul  2 15:40:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 15:40:24 2012] Using photon index=1.80, rate=0.00328, arf fullrun_mos2_xmm0067750101_pi300-10000_pass1_cl_src10.arf
[Mon Jul  2 15:40:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 15:40:24 2012] Updating source flux to 4.6e-14