[Mon Jul  2 13:08:08 2012] Detection parameters:
  Position = (194.6, 360.0) = 14 58 59.12 -31 37 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.6 +/- 20.8
  Background counts = 92.1
  Rate = 0.007 +/- 0.0008

[Mon Jul  2 13:08:08 2012] Off-axis axis estimate = 8.75'
[Mon Jul  2 13:31:56 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 13:31:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 13:31:56 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Mon Jul  2 13:31:56 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Mon Jul  2 13:31:56 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.80"
[Mon Jul  2 13:44:39 2012] fullrun_mos1_xmm0067750101_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jul  2 13:44:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0067750101_pi300-10000_cl_pass0_src2.csv
[Mon Jul  2 13:44:39 2012] fullrun_mos1_xmm0067750101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jul  2 13:44:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0067750101_pi300-10000_cl_pass0_src2.csv
[Mon Jul  2 13:44:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067750101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067750101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 13:44:39 2012] fullrun_mos1_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jul  2 13:44:39 2012] fullrun_mos1_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jul  2 13:44:39 2012] Fit fullrun_mos1_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jul  2 13:58:41 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.667666 pixels away
[Mon Jul  2 13:58:41 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 13:58:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 13:58:41 2012] Assessing source extent using major
[Mon Jul  2 13:58:41 2012] Source does appear to be extended
[Mon Jul  2 13:58:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 14:18:07 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 14:18:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 14:18:07 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Mon Jul  2 14:18:07 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Mon Jul  2 14:18:07 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.80"
[Mon Jul  2 14:33:36 2012] fullrun_mos1_xmm0067750101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jul  2 14:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067750101_pi300-10000_cl_pass1_src2.csv
[Mon Jul  2 14:33:36 2012] fullrun_mos1_xmm0067750101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jul  2 14:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067750101_pi300-10000_cl_pass1_src2.csv
[Mon Jul  2 14:33:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067750101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067750101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:33:36 2012] fullrun_mos1_xmm0067750101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jul  2 14:33:36 2012] fullrun_mos1_xmm0067750101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jul  2 14:33:36 2012] Fit fullrun_mos1_xmm0067750101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jul  2 14:46:29 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.667666 pixels away
[Mon Jul  2 14:46:29 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:29 2012] Assessing source extent using major
[Mon Jul  2 14:46:29 2012] Source does appear to be extended
[Mon Jul  2 14:46:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 15:21:37 2012] XMMSAS src. selection expression = ellipse(16883.856415, 31274.741791, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  2 15:21:37 2012] Writing source region out to fullrun_mos1_xmm0067750101_pi300-10000_pass1_cl_src6_src.reg
[Mon Jul  2 15:21:37 2012] Extracting stamp from image fullrun_mos1_xmm0067750101_pi300-10000_cl_sm2.00.img.gz, (157, 323) - (232, 398)
[Mon Jul  2 15:21:37 2012] XMMSAS bgd. selection expression = annulus(16883.856415, 31274.741791, 1087.500000, 2175.000000, X, Y) && !ellipse(17431.573029, 33288.077057, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  2 15:21:37 2012] Writing fullrun_mos1_xmm0067750101_pi300-10000_pass1_cl_src6.gif
[Mon Jul  2 15:21:52 2012] Mean detx,y = (6714.37, -7983.13) 
[Mon Jul  2 15:21:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 15:22:06 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 15:22:06 2012] Setting source spectrum file to fullrun_mos1_xmm0067750101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jul  2 15:22:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0067750101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jul  2 15:28:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul  2 15:28:11 2012] rmf not generated due to insufficient counts
[Mon Jul  2 15:40:23 2012] Updating aperture counts using extracted products
[Mon Jul  2 15:40:23 2012] Error reading totcts from fullrun_mos1_xmm0067750101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jul  2 15:40:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 15:40:23 2012] Using photon index=1.80, rate=0.00654, arf fullrun_mos1_xmm0067750101_pi300-10000_pass1_cl_src6.arf
[Mon Jul  2 15:40:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 15:40:23 2012] Updating source flux to 1.2e-13
[Mon Jul  2 15:40:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting