[Tue Sep 27 20:57:32 2011] Detection parameters:
  Position = (355.8, 377.7) = 0 48 20.75 32 3 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 249.2 +/- 23.5
  Background counts = 176.5
  Rate = 0.005 +/- 0.0005

[Tue Sep 27 20:57:32 2011] Off-axis axis estimate = 7.09'
[Tue Sep 27 21:54:44 2011] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 21:54:44 2011] Initial guess for spatial extent in simple fitting = 9.97"
[Tue Sep 27 21:54:44 2011] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.609
[Tue Sep 27 21:54:44 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.97"
[Tue Sep 27 22:01:54 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Sep 27 22:01:54 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src3.csv
[Tue Sep 27 22:01:54 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Sep 27 22:01:54 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src3.csv
[Tue Sep 27 22:01:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:01:54 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 22:01:54 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 22:01:54 2011] Fit fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 22:09:56 2011] Spatial fit model total counts = 461.000000, observed total counts = 461.000000
[Tue Sep 27 22:09:56 2011] Offset between fit and detection position for source 3 = 1.261381 pixels
[Tue Sep 27 22:09:56 2011] 457.757500 total counts/ 358.745000 bgd. counts: snr = 5.227537
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.261381 pixels
  Position = (354.6, 377.9) = 0 48 21.17 32 4 0.0
  Extent = 5.6 (4.3-7.0)", rotation angle = 0
  Source counts = 99.0 +/- 21.4
  Background counts = 358.7
  Rate = 0.003 +/- 0.0007
[Tue Sep 27 22:09:56 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:09:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:09:56 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:09:56 2011] Source does appear to be extended
[Tue Sep 27 22:09:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:13:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:13:02 2011] Initial guess for spatial extent in simple fitting = 5.60"
[Wed Sep 28 00:13:02 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.938
[Wed Sep 28 00:13:02 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.60"
[Wed Sep 28 00:19:04 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Sep 28 00:19:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src3.csv
[Wed Sep 28 00:19:04 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Sep 28 00:19:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src3.csv
[Wed Sep 28 00:19:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:19:04 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 00:19:04 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 00:19:04 2011] Fit fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 00:28:17 2011] Warning, spatial fit 3 centroid is now closest to src. 6
[Wed Sep 28 00:28:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:28:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:28:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 00:28:17 2011] Source does appear to be extended
[Wed Sep 28 00:28:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:30:10 2011] XMMSAS src. selection expression = ellipse(30798.708200, 32831.713040, 336.163810, 336.163810, 0.000000, X, Y)
[Wed Sep 28 04:30:10 2011] Writing source region out to fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src3_src.reg
[Wed Sep 28 04:30:10 2011] Extracting stamp from image fullrun_mos1_xmm0067540201_pi300-10000_cl_sm2.00.img.gz, (335, 359) - (374, 397)
[Wed Sep 28 04:30:10 2011] XMMSAS bgd. selection expression = annulus(30798.708200, 32831.713040, 560.273016, 1120.546032, X, Y)
[Wed Sep 28 04:30:10 2011] Writing fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src3.gif
[Wed Sep 28 04:33:56 2011] Mean detx,y = (-9760.95, -2755.99) 
[Wed Sep 28 04:33:57 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 04:34:05 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 04:34:05 2011] Setting source spectrum file to fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 04:34:05 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Sep 28 04:49:31 2011] Not generating rmf since there are only 99 counts
[Wed Sep 28 04:49:31 2011] rmf not generated due to insufficient counts
[Wed Sep 28 05:03:43 2011] Updating aperture counts using extracted products
[Wed Sep 28 05:03:43 2011] Error reading totcts from fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 05:03:43 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 05:03:43 2011] Using photon index=1.80, rate=0.00336, arf fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src3.arf
[Wed Sep 28 05:03:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 05:03:43 2011] Updating source flux to 7.2e-14
[Wed Sep 28 05:03:44 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting