[Tue Sep 27 20:57:32 2011] Detection parameters:
  Position = (278.6, 287.0) = 0 48 47.17 31 57 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36635.7 +/- 228.6
  Background counts = 201.1
  Rate = 0.8 +/- 0.005

[Tue Sep 27 20:57:32 2011] Off-axis axis estimate = 1.66'
[Tue Sep 27 21:54:44 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 21:54:44 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Sep 27 21:54:44 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Tue Sep 27 21:54:44 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Tue Sep 27 22:01:54 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Sep 27 22:01:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 22:01:54 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Sep 27 22:01:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 22:01:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:01:54 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 22:01:54 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 22:01:54 2011] Fit fullrun_mos1_xmm0067540201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 22:09:56 2011] Spatial fit model total counts = 19591.300000, observed total counts = 19586.000000
[Tue Sep 27 22:09:56 2011] Offset between fit and detection position for source 1 = 0.035578 pixels
[Tue Sep 27 22:09:56 2011] 19634.190000 total counts/ 4431.690000 bgd. counts: snr = 228.365411
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.035578 pixels
  Position = (278.6, 287.1) = 0 48 47.16 31 57 24.8
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 15202.5 +/- 140.1
  Background counts = 4431.7
  Rate = 0.5 +/- 0.005
[Tue Sep 27 22:09:56 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:09:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:09:56 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:09:56 2011] Source does appear to be extended
[Tue Sep 27 22:09:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:13:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:13:02 2011] Initial guess for spatial extent in simple fitting = 5.44"
[Wed Sep 28 00:13:02 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.979
[Wed Sep 28 00:13:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.44"
[Wed Sep 28 00:19:04 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 00:19:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 00:19:04 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 00:19:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 00:19:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:19:04 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 00:19:04 2011] fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 00:19:04 2011] Fit fullrun_mos1_xmm0067540201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 00:28:17 2011] Spatial fit model total counts = 19586.000000, observed total counts = 19586.000000
[Wed Sep 28 00:28:17 2011] Offset between fit and detection position for source 1 = 0.000015 pixels
[Wed Sep 28 00:28:17 2011] 19628.770000 total counts/ 4425.570000 bgd. counts: snr = 228.533779
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000015 pixels
  Position = (278.6, 287.1) = 0 48 47.16 31 57 24.8
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 15203.2 +/- 140.1
  Background counts = 4425.6
  Rate = 0.5 +/- 0.005
[Wed Sep 28 00:28:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:28:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:28:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 00:28:17 2011] Source does appear to be extended
[Wed Sep 28 00:28:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:30:10 2011] Counts = 15203.200000, rescaling region sizes by 3.000000
[Wed Sep 28 04:30:10 2011] XMMSAS src. selection expression = ellipse(24189.303800, 24924.994800, 980.132428, 980.132428, 0.000000, X, Y)
[Wed Sep 28 04:30:10 2011] Writing source region out to fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 04:30:10 2011] Extracting stamp from image fullrun_mos1_xmm0067540201_pi300-10000_cl_sm2.00.img.gz, (222, 231) - (335, 343)
[Wed Sep 28 04:30:10 2011] XMMSAS bgd. selection expression = annulus(24189.303800, 24924.994800, 4900.662141, 9801.324282, X, Y) && !ellipse(24861.026200, 22218.503200, 649.312819, 649.312819, 0.000000, X, Y) && !ellipse(30798.708200, 32831.713040, 448.218413, 448.218413, 0.000000, X, Y) && !ellipse(23354.531860, 16207.242111, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed Sep 28 04:30:10 2011] Writing fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 04:30:17 2011] Mean detx,y = (233.38, -241.75) 
[Wed Sep 28 04:30:18 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 04:33:26 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 04:33:26 2011] Setting source spectrum file to fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 04:33:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 05:03:42 2011] Updating aperture counts using extracted products
[Wed Sep 28 05:03:42 2011] Error reading totcts from fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 05:03:43 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 05:03:43 2011] Using photon index=1.80, rate=0.516, arf fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 05:03:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 05:03:43 2011] Updating source flux to 4.8e-12
[Wed Sep 28 05:04:32 2011] Reading fit data from xmm0067540201/analysis//spectral/fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Sep 28 05:04:32 2011] Spectral fit parameter nH value = 1.38344e+23
[Wed Sep 28 05:04:32 2011] Spectral fit parameter PhoIndex value = 1.62212
[Wed Sep 28 05:04:32 2011] Failed to get F(0.3-8.0) from xmm0067540201/analysis//spectral/fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 05:04:32 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 05:04:32 2011] Using Nh = 1.4e+23, photon index=1.62, rate=0.516, arf fullrun_mos1_xmm0067540201_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 05:04:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 05:04:32 2011] Updating source flux to 1.7e-11