[Tue Jun 26 07:17:53 2012] Detection parameters:
  Position = (264.6, 259.3) = 17 26 12.69 2 18 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.9 +/- 11.5
  Background counts = 9.9
  Rate = 0.005 +/- 0.0009

[Tue Jun 26 07:17:53 2012] Off-axis axis estimate = 3.75'
[Tue Jun 26 07:55:20 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 07:55:20 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Tue Jun 26 07:55:20 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.077
[Tue Jun 26 07:55:20 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.31"
[Tue Jun 26 08:19:48 2012] fullrun_mos1_xmm0067340401_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jun 26 08:19:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067340401_pi300-10000_cl_pass0_src11.csv
[Tue Jun 26 08:19:48 2012] fullrun_mos1_xmm0067340401_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jun 26 08:19:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067340401_pi300-10000_cl_pass0_src11.csv
[Tue Jun 26 08:19:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067340401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067340401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 08:19:48 2012] fullrun_mos1_xmm0067340401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jun 26 08:19:48 2012] fullrun_mos1_xmm0067340401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jun 26 08:19:48 2012] Fit fullrun_mos1_xmm0067340401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jun 26 08:52:26 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 10.945804 pixels away
[Tue Jun 26 08:52:26 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 08:52:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 08:52:26 2012] Assessing source extent using major
[Tue Jun 26 08:52:26 2012] Source does appear to be extended
[Tue Jun 26 08:52:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 08:52:26 2012] Source is confused with source 9
[Tue Jun 26 09:25:46 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 09:25:46 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Tue Jun 26 09:25:46 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.077
[Tue Jun 26 09:25:46 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.31"
[Tue Jun 26 09:54:00 2012] fullrun_mos1_xmm0067340401_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jun 26 09:54:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067340401_pi300-10000_cl_pass1_src11.csv
[Tue Jun 26 09:54:00 2012] fullrun_mos1_xmm0067340401_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jun 26 09:54:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067340401_pi300-10000_cl_pass1_src11.csv
[Tue Jun 26 09:54:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067340401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067340401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 09:54:00 2012] fullrun_mos1_xmm0067340401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jun 26 09:54:00 2012] fullrun_mos1_xmm0067340401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jun 26 09:54:00 2012] Fit fullrun_mos1_xmm0067340401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jun 26 10:45:29 2012] Source 12 is offset by -6.780190 and -2.480985 pixels which is larger than
2 X fitted extent = 2.824570 x 2.824570, not incorporating fit results
[Tue Jun 26 10:45:29 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 10.945804 pixels away
[Tue Jun 26 10:45:29 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 51.972019 pixels away
[Tue Jun 26 10:45:29 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 10:45:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 10:45:29 2012] Assessing source extent using major
[Tue Jun 26 10:45:29 2012] Source does appear to be extended
[Tue Jun 26 10:45:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 11:32:38 2012] XMMSAS src. selection expression = ellipse(22970.500458, 22507.529724, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 11:32:38 2012] Writing source region out to fullrun_mos1_xmm0067340401_pi300-10000_pass1_cl_src12_src.reg
[Tue Jun 26 11:32:38 2012] Extracting stamp from image fullrun_mos1_xmm0067340401_pi300-10000_cl_sm2.00.img.gz, (227, 222) - (302, 297)
[Tue Jun 26 11:32:38 2012] XMMSAS bgd. selection expression = annulus(22970.500458, 22507.529724, 1087.500000, 2175.000000, X, Y) && !ellipse(22973.315800, 22798.020000, 2604.384075, 2604.384075, 0.000000, X, Y) && !ellipse(23552.894400, 22753.060400, 516.972015, 516.972015, 0.000000, X, Y)
[Tue Jun 26 11:32:38 2012] Writing fullrun_mos1_xmm0067340401_pi300-10000_pass1_cl_src12.gif
[Tue Jun 26 11:39:17 2012] Mean detx,y = (1331.38, 2077.04) 
[Tue Jun 26 11:39:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 11:39:30 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 11:39:31 2012] Setting source spectrum file to fullrun_mos1_xmm0067340401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jun 26 11:39:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0067340401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jun 26 12:19:18 2012] Not generating rmf since there are only 65 counts
[Tue Jun 26 12:19:18 2012] rmf not generated due to insufficient counts
[Tue Jun 26 12:57:29 2012] Updating aperture counts using extracted products
[Tue Jun 26 12:57:29 2012] Error reading totcts from fullrun_mos1_xmm0067340401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jun 26 12:57:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 12:57:30 2012] Using photon index=1.80, rate=0.00488, arf fullrun_mos1_xmm0067340401_pi300-10000_pass1_cl_src12.arf
[Tue Jun 26 12:57:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 12:57:30 2012] Updating source flux to 5e-14
[Tue Jun 26 12:57:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting