[Wed Jun 19 18:27:03 2013] Detection parameters:
  Position = (282.5, 298.7) = 18 8 31.19 -31 19 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.5 +/- 10.5
  Background counts = 10.2
  Rate = 0.004 +/- 0.0007

[Wed Jun 19 18:27:03 2013] Off-axis axis estimate = 1.15'
[Wed Jun 19 18:56:55 2013] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 18:56:55 2013] Initial guess for spatial extent in simple fitting = 7.00"
[Wed Jun 19 18:56:55 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Wed Jun 19 18:56:55 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.00"
[Wed Jun 19 19:11:31 2013] fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 19 19:11:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_src5.csv
[Wed Jun 19 19:11:31 2013] fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 19 19:11:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_src5.csv
[Wed Jun 19 19:11:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 19:11:31 2013] fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 19 19:11:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 19 19:11:31 2013] fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 19 19:11:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 19 19:11:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067340301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 19:11:38 2013] Source 10 is offset by 6.979137 and -6.785045 pixels which is larger than
2 X fitted extent = 0.805168 x 0.805168, not incorporating fit results
[Wed Jun 19 19:11:38 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 19:11:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 19:11:38 2013] Assessing source extent using major
[Wed Jun 19 19:11:38 2013] Source does appear to be extended
[Wed Jun 19 19:11:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 19:40:14 2013] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 19:40:14 2013] Initial guess for spatial extent in simple fitting = 7.00"
[Wed Jun 19 19:40:14 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Wed Jun 19 19:40:14 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.00"
[Wed Jun 19 19:54:57 2013] fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun 19 19:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_src5.csv
[Wed Jun 19 19:54:57 2013] fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun 19 19:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_src5.csv
[Wed Jun 19 19:54:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 19:54:57 2013] fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 19 19:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 19 19:54:57 2013] fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 19 19:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 19 19:54:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067340301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 19:55:04 2013] Source 10 is offset by 3.566034 and -0.241240 pixels which is larger than
2 X fitted extent = 0.852897 x 3.698515, not incorporating fit results
[Wed Jun 19 19:55:04 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 19:55:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 19:55:04 2013] Assessing source extent using major
[Wed Jun 19 19:55:04 2013] Source does appear to be extended
[Wed Jun 19 19:55:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 20:19:12 2013] XMMSAS src. selection expression = ellipse(24532.286926, 25934.599060, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 20:19:12 2013] Writing source region out to fullrun_mos2_xmm0067340301_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun 19 20:19:12 2013] Extracting stamp from image fullrun_mos2_xmm0067340301_pi300-10000_cl_sm2.00.img.gz, (245, 261) - (320, 336)
[Wed Jun 19 20:19:12 2013] XMMSAS bgd. selection expression = annulus(24532.286926, 25934.599060, 1087.500000, 2175.000000, X, Y) && !ellipse(26045.658740, 27617.587600, 417.563212, 417.563212, 0.000000, X, Y)
[Wed Jun 19 20:19:12 2013] Writing fullrun_mos2_xmm0067340301_pi300-10000_pass1_cl_src10.gif
[Wed Jun 19 20:20:10 2013] Mean detx,y = (-157.07, -1609.55) 
[Wed Jun 19 20:20:11 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 20:20:20 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 20:20:20 2013] Setting source spectrum file to fullrun_mos2_xmm0067340301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 19 20:20:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0067340301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun 19 20:26:45 2013] Not generating rmf since there are only 66 counts
[Wed Jun 19 20:26:45 2013] rmf not generated due to insufficient counts
[Wed Jun 19 20:27:46 2013] Updating aperture counts using extracted products
[Wed Jun 19 20:27:46 2013] Total counts from fullrun_mos2_xmm0067340301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 126.00
[Wed Jun 19 20:27:46 2013] Total counts from fullrun_mos2_xmm0067340301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 570.00
[Wed Jun 19 20:27:46 2013] Got source and background scale factors 1185880.000000, 10512596.000000
[Wed Jun 19 20:27:46 2013] User source parameters:
  Position = (282.5, 298.7) = 18 8 31.19 -31 19 2.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 61.7 +/- 12.3
  Background aperture counts = 64.3
  Rate = 0.004 +/- 0.0007

[Wed Jun 19 20:27:46 2013] Updating counts from extracted products
[Wed Jun 19 20:27:46 2013] Set source signif. to 61.70/8.02 = 7.69
[Wed Jun 19 20:27:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 20:27:47 2013] Using photon index=1.80, rate=0.00376, arf fullrun_mos2_xmm0067340301_pi300-10000_pass1_cl_src10.arf
[Wed Jun 19 20:27:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 20:27:47 2013] Updating source flux to 5e-14
[Wed Jun 19 20:27:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 20:27:50 2013] xmm0067340301/analysis//spectral/fullrun_mos2_xmm0067340301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete