[Sun Jun  3 10:14:24 2012] Detection parameters:
  Position = (280.2, 213.0) = 18 4 4.04 -42 37 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.6 +/- 18.1
  Background counts = 24.0
  Rate = 0.02 +/- 0.002

[Sun Jun  3 10:14:24 2012] Off-axis axis estimate = 6.34'
[Sun Jun  3 10:28:36 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 10:28:36 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Sun Jun  3 10:28:36 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.024
[Sun Jun  3 10:28:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.60"
[Sun Jun  3 10:40:39 2012] fullrun_mos1_xmm0067340201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  3 10:40:39 2012] fullrun_mos1_xmm0067340201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  3 10:40:39 2012] Fit fullrun_mos1_xmm0067340201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Jun  3 10:40:39 2012] fullrun_mos1_xmm0067340201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  3 10:40:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067340201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  3 10:40:39 2012] fullrun_mos1_xmm0067340201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  3 10:40:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067340201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  3 10:40:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067340201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067340201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 10:53:51 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.202346 pixels away
[Sun Jun  3 10:53:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 10:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 10:53:51 2012] Assessing source extent using major
[Sun Jun  3 10:53:51 2012] Source does appear to be extended
[Sun Jun  3 10:53:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 11:06:44 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 11:06:44 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Sun Jun  3 11:06:44 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.024
[Sun Jun  3 11:06:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.60"
[Sun Jun  3 11:18:48 2012] fullrun_mos1_xmm0067340201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  3 11:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067340201_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 11:18:48 2012] fullrun_mos1_xmm0067340201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  3 11:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067340201_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 11:18:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067340201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067340201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 11:18:48 2012] fullrun_mos1_xmm0067340201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  3 11:18:48 2012] fullrun_mos1_xmm0067340201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  3 11:18:48 2012] Fit fullrun_mos1_xmm0067340201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  3 11:29:35 2012] Spatial fit model total counts = 401.944000, observed total counts = 388.000000
[Sun Jun  3 11:29:35 2012] Offset between fit and detection position for source 3 = 0.108407 pixels
[Sun Jun  3 11:29:35 2012] 402.161000 total counts/ 263.443000 bgd. counts: snr = 8.546523
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.108407 pixels
  Position = (280.3, 212.9) = 18 4 4.01 -42 37 28.6
  Extent = 6.2 (5.3-7.1)", rotation angle = 0
  Source counts = 138.7 +/- 20.1
  Background counts = 263.4
  Rate = 0.01 +/- 0.001
[Sun Jun  3 11:29:35 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 11:29:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 11:29:35 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 11:29:35 2012] Source does appear to be extended
[Sun Jun  3 11:29:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 11:35:37 2012] XMMSAS src. selection expression = ellipse(24340.331800, 18474.398400, 369.408011, 369.408011, 0.000000, X, Y)
[Sun Jun  3 11:35:37 2012] Writing source region out to fullrun_mos1_xmm0067340201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun  3 11:35:37 2012] Extracting stamp from image fullrun_mos1_xmm0067340201_pi300-10000_cl_sm2.00.img.gz, (259, 192) - (302, 234)
[Sun Jun  3 11:35:37 2012] XMMSAS bgd. selection expression = annulus(24340.331800, 18474.398400, 615.680018, 1231.360035, X, Y)
[Sun Jun  3 11:35:37 2012] Writing fullrun_mos1_xmm0067340201_pi300-10000_pass1_cl_src3.gif
[Sun Jun  3 11:35:40 2012] Mean detx,y = (6009.18, 343.24) 
[Sun Jun  3 11:35:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 11:35:58 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 11:35:58 2012] Setting source spectrum file to fullrun_mos1_xmm0067340201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 11:35:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0067340201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  3 11:49:08 2012] Updating aperture counts using extracted products
[Sun Jun  3 11:49:08 2012] Error reading totcts from fullrun_mos1_xmm0067340201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 11:49:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 11:49:08 2012] Using photon index=1.80, rate=0.00985, arf fullrun_mos1_xmm0067340201_pi300-10000_pass1_cl_src3.arf
[Sun Jun  3 11:49:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 11:49:08 2012] Updating source flux to 1.4e-13
[Sun Jun  3 11:49:18 2012] Reading fit data from xmm0067340201/analysis//spectral/fullrun_mos1_xmm0067340201_pi300-10000_pass1_cl_src3_pl.csv
[Sun Jun  3 11:49:18 2012] Spectral fit parameter nH value = 3.60243e+21
[Sun Jun  3 11:49:18 2012] Spectral fit parameter PhoIndex value = 4.17046
[Sun Jun  3 11:49:18 2012] Failed to get F(0.3-8.0) from xmm0067340201/analysis//spectral/fullrun_mos1_xmm0067340201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Jun  3 11:49:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 11:49:18 2012] Using Nh = 3.6e+21, photon index=4.17, rate=0.00985, arf fullrun_mos1_xmm0067340201_pi300-10000_pass1_cl_src3.arf
[Sun Jun  3 11:49:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 11:49:18 2012] Updating source flux to 9e-14