[Sat Jul 21 08:15:23 2012] Detection parameters:
  Position = (346.1, 147.9) = 2 38 5.01 -52 23 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.8 +/- 13.9
  Background counts = 53.5
  Rate = 0.002 +/- 0.0005

[Sat Jul 21 08:15:23 2012] Off-axis axis estimate = 11.45'
[Sat Jul 21 08:18:31 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 08:18:31 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Sat Jul 21 08:18:31 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830
[Sat Jul 21 08:18:31 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 12.15"
[Sat Jul 21 10:05:09 2012] fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_src45.ximg exists
[Sat Jul 21 10:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_src45.csv
[Sat Jul 21 10:05:09 2012] fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Jul 21 10:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_src45.csv
[Sat Jul 21 10:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:05:10 2012] fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Jul 21 10:05:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Sat Jul 21 10:05:10 2012] fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Jul 21 10:05:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Sat Jul 21 10:05:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 12:11:38 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 13.780452 pixels away
[Sat Jul 21 12:11:38 2012] Source 45 is offset by -6.306061 and -1.255565 pixels which is larger than
2 X fitted extent = 1.443255 x 1.443255, not incorporating fit results
[Sat Jul 21 12:11:38 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 13.193501 pixels away
[Sat Jul 21 12:11:38 2012] Spatial fit model total counts = 4281.980000, observed total counts = 418.000000
[Sat Jul 21 12:11:38 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 12:11:38 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 12:11:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 12:11:38 2012] Assessing source extent using major
[Sat Jul 21 12:11:38 2012] Source does appear to be extended
[Sat Jul 21 12:11:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 12:11:38 2012] Deleting source due to low Poisson probability 0.9