[Sat Jul 21 08:16:02 2012] Detection parameters:
  Position = (315.9, 313.1) = 2 38 19.40 -52 11 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71241.6 +/- 314.6
  Background counts = 27.5
  Rate = 2 +/- 0.01

[Sat Jul 21 08:16:03 2012] Off-axis axis estimate = 1.65'
[Sat Jul 21 10:38:07 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:38:07 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Jul 21 10:38:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sat Jul 21 10:38:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Jul 21 12:11:20 2012] fullrun_mos2_xmm0067190101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 12:11:20 2012] fullrun_mos2_xmm0067190101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 12:11:20 2012] Fit fullrun_mos2_xmm0067190101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jul 21 12:11:21 2012] fullrun_mos2_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 12:11:21 2012] fullrun_mos2_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 12:11:21 2012] Fit fullrun_mos2_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 12:11:52 2012] Spatial fit model total counts = 65353.700000, observed total counts = 62359.000000
[Sat Jul 21 12:11:52 2012] Offset between fit and detection position for source 2 = 0.236501 pixels
[Sat Jul 21 12:11:52 2012] 65582.100000 total counts/ 16626.400000 bgd. counts: snr = 379.668138
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.236501 pixels
  Position = (315.7, 313.2) = 2 38 19.50 -52 11 34.1
  Extent = 6.1 (6.0-6.1)", rotation angle = 0
  Source counts = 48955.7 +/- 256.1
  Background counts = 16626.4
  Rate = 2 +/- 0.008
[Sat Jul 21 12:11:52 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 12:11:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 12:11:52 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 12:11:52 2012] Source does appear to be extended
[Sat Jul 21 12:11:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 14:22:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 14:22:03 2012] Initial guess for spatial extent in simple fitting = 6.08"
[Sat Jul 21 14:22:03 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.110
[Sat Jul 21 14:22:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.08"
[Sat Jul 21 15:16:46 2012] fullrun_mos2_xmm0067190101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 21 15:16:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067190101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 15:16:46 2012] fullrun_mos2_xmm0067190101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 21 15:16:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067190101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 15:16:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067190101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067190101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 15:16:46 2012] fullrun_mos2_xmm0067190101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 21 15:16:46 2012] fullrun_mos2_xmm0067190101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 21 15:16:46 2012] Fit fullrun_mos2_xmm0067190101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 21 15:17:04 2012] Spatial fit model total counts = 65307.600000, observed total counts = 62359.000000
[Sat Jul 21 15:17:04 2012] Offset between fit and detection position for source 2 = 0.000540 pixels
[Sat Jul 21 15:17:04 2012] 65520.900000 total counts/ 16553.700000 bgd. counts: snr = 380.590314
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000540 pixels
  Position = (315.7, 313.2) = 2 38 19.50 -52 11 34.1
  Extent = 6.1 (6.0-6.1)", rotation angle = 0
  Source counts = 48967.2 +/- 256.0
  Background counts = 16553.7
  Rate = 2 +/- 0.008
[Sat Jul 21 15:17:04 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 15:17:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 15:17:04 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 15:17:04 2012] Source does appear to be extended
[Sat Jul 21 15:17:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 18:17:26 2012] Counts = 48967.200000, rescaling region sizes by 3.000000
[Sat Jul 21 18:17:26 2012] XMMSAS src. selection expression = ellipse(27416.406600, 27203.161000, 1095.337832, 1095.337832, 0.000000, X, Y)
[Sat Jul 21 18:17:26 2012] Writing source region out to fullrun_mos2_xmm0067190101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 21 18:17:26 2012] Extracting stamp from image fullrun_mos2_xmm0067190101_pi300-10000_cl_sm2.00.img.gz, (253, 250) - (379, 376)
[Sat Jul 21 18:17:26 2012] XMMSAS bgd. selection expression = annulus(27416.406600, 27203.161000, 5476.689158, 10953.378315, X, Y) && !ellipse(21252.801376, 18051.166595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35618.130768, 28430.161987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29434.227692, 24231.827881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28332.130341, 26814.520905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27892.829193, 25872.312073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28360.475433, 27259.132111, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 18:17:26 2012] Writing fullrun_mos2_xmm0067190101_pi300-10000_pass1_cl_src2.gif
[Sat Jul 21 18:17:33 2012] Mean detx,y = (3.85, -58.36) 
[Sat Jul 21 18:17:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 18:22:22 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 18:22:22 2012] Setting source spectrum file to fullrun_mos2_xmm0067190101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 18:22:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0067190101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 21 18:29:41 2012] Updating aperture counts using extracted products
[Sat Jul 21 18:29:41 2012] Error reading totcts from fullrun_mos2_xmm0067190101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 18:29:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 18:29:41 2012] Using photon index=1.80, rate=1.58, arf fullrun_mos2_xmm0067190101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 21 18:29:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 18:29:41 2012] Updating source flux to 1.6e-11
[Sat Jul 21 18:30:20 2012] Reading fit data from xmm0067190101/analysis//spectral/fullrun_mos2_xmm0067190101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jul 21 18:30:20 2012] Spectral fit parameter nH value = 1.87843e+20
[Sat Jul 21 18:30:20 2012] Spectral fit parameter PhoIndex value = 1.81315
[Sat Jul 21 18:30:20 2012] Failed to get F(0.3-8.0) from xmm0067190101/analysis//spectral/fullrun_mos2_xmm0067190101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 18:30:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 18:30:20 2012] Using Nh = 1.9e+20, photon index=1.81, rate=1.58, arf fullrun_mos2_xmm0067190101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 21 18:30:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 18:30:20 2012] Updating source flux to 1.6e-11