[Sat Jul 21 08:15:40 2012] Detection parameters:
  Position = (315.9, 313.1) = 2 38 19.41 -52 11 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71747.5 +/- 321.1
  Background counts = 26.9
  Rate = 2 +/- 0.01

[Sat Jul 21 08:15:40 2012] Off-axis axis estimate = 1.65'
[Sat Jul 21 10:05:10 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:05:10 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Jul 21 10:05:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sat Jul 21 10:05:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Jul 21 10:38:07 2012] fullrun_mos1_xmm0067190101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 10:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067190101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 10:38:07 2012] fullrun_mos1_xmm0067190101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 10:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067190101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 10:38:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067190101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067190101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:38:07 2012] fullrun_mos1_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 10:38:07 2012] fullrun_mos1_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 10:38:07 2012] Fit fullrun_mos1_xmm0067190101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 12:11:43 2012] Spatial fit model total counts = 61822.000000, observed total counts = 61822.000000
[Sat Jul 21 12:11:43 2012] Offset between fit and detection position for source 3 = 0.171488 pixels
[Sat Jul 21 12:11:43 2012] 61834.800000 total counts/ 13026.000000 bgd. counts: snr = 427.654054
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.171488 pixels
  Position = (315.8, 313.3) = 2 38 19.46 -52 11 33.9
  Extent = 6.2 (6.2-6.3)", rotation angle = 0
  Source counts = 48808.8 +/- 248.7
  Background counts = 13026.0
  Rate = 2 +/- 0.008
[Sat Jul 21 12:11:43 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 12:11:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 12:11:43 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 12:11:43 2012] Source does appear to be extended
[Sat Jul 21 12:11:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 14:11:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 14:11:06 2012] Initial guess for spatial extent in simple fitting = 6.23"
[Sat Jul 21 14:11:06 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.071
[Sat Jul 21 14:11:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.23"
[Sat Jul 21 14:22:02 2012] fullrun_mos1_xmm0067190101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 21 14:22:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067190101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 14:22:02 2012] fullrun_mos1_xmm0067190101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 21 14:22:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067190101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 14:22:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067190101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067190101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 14:22:03 2012] fullrun_mos1_xmm0067190101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 21 14:22:03 2012] fullrun_mos1_xmm0067190101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 21 14:22:03 2012] Fit fullrun_mos1_xmm0067190101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 21 15:17:02 2012] Spatial fit model total counts = 61821.900000, observed total counts = 61822.000000
[Sat Jul 21 15:17:02 2012] Offset between fit and detection position for source 3 = 0.000012 pixels
[Sat Jul 21 15:17:02 2012] 61834.600000 total counts/ 13015.400000 bgd. counts: snr = 427.919324
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000012 pixels
  Position = (315.8, 313.3) = 2 38 19.46 -52 11 33.9
  Extent = 6.2 (6.2-6.3)", rotation angle = 0
  Source counts = 48819.2 +/- 248.7
  Background counts = 13015.4
  Rate = 2 +/- 0.008
[Sat Jul 21 15:17:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 15:17:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 15:17:02 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 15:17:02 2012] Source does appear to be extended
[Sat Jul 21 15:17:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 17:54:07 2012] Counts = 48819.200000, rescaling region sizes by 3.000000
[Sat Jul 21 17:54:07 2012] XMMSAS src. selection expression = ellipse(27423.393400, 27206.372000, 1122.337832, 1122.337832, 0.000000, X, Y)
[Sat Jul 21 17:54:07 2012] Writing source region out to fullrun_mos1_xmm0067190101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 21 17:54:07 2012] Extracting stamp from image fullrun_mos1_xmm0067190101_pi300-10000_cl_sm2.00.img.gz, (251, 249) - (380, 378)
[Sat Jul 21 17:54:07 2012] XMMSAS bgd. selection expression = annulus(27423.393400, 27206.372000, 5611.689161, 11223.378323, X, Y) && !ellipse(21228.461395, 18036.242676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29436.564117, 24232.011078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35630.606750, 28443.206146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29724.313538, 26213.791321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34294.750000, 38245.237122, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 17:54:07 2012] Writing fullrun_mos1_xmm0067190101_pi300-10000_pass1_cl_src3.gif
[Sat Jul 21 17:54:15 2012] Mean detx,y = (165.41, -155.68) 
[Sat Jul 21 17:54:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 18:00:38 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 18:00:38 2012] Setting source spectrum file to fullrun_mos1_xmm0067190101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 21 18:00:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0067190101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 21 18:29:40 2012] Updating aperture counts using extracted products
[Sat Jul 21 18:29:40 2012] Error reading totcts from fullrun_mos1_xmm0067190101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 21 18:29:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 18:29:40 2012] Using photon index=1.80, rate=1.58, arf fullrun_mos1_xmm0067190101_pi300-10000_pass1_cl_src3.arf
[Sat Jul 21 18:29:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 18:29:40 2012] Updating source flux to 1.4e-11
[Sat Jul 21 18:30:04 2012] Reading fit data from xmm0067190101/analysis//spectral/fullrun_mos1_xmm0067190101_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jul 21 18:30:04 2012] Spectral fit parameter nH value = 6.19196e+19
[Sat Jul 21 18:30:04 2012] Spectral fit parameter PhoIndex value = 1.77284
[Sat Jul 21 18:30:04 2012] Failed to get F(0.3-8.0) from xmm0067190101/analysis//spectral/fullrun_mos1_xmm0067190101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 18:30:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 18:30:04 2012] Using Nh = 6.2e+19, photon index=1.77, rate=1.58, arf fullrun_mos1_xmm0067190101_pi300-10000_pass1_cl_src3.arf
[Sat Jul 21 18:30:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 18:30:04 2012] Updating source flux to 1.5e-11