[Mon Jul  2 11:18:06 2012] Detection parameters:
  Position = (471.9, 234.8) = 1 11 30.08 -45 37 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.5 +/- 15.4
  Background counts = 46.7
  Rate = 0.002 +/- 0.0003

[Mon Jul  2 11:18:06 2012] Off-axis axis estimate = 13.40'
[Mon Jul  2 11:20:29 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 11:20:29 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Mon Jul  2 11:20:29 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Mon Jul  2 11:20:29 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 13.13"
[Mon Jul  2 12:14:03 2012] fullrun_pn_xmm0067170101_pi300-10000_cl_pass0_src39.ximg exists
[Mon Jul  2 12:14:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067170101_pi300-10000_cl_pass0_src39.csv
[Mon Jul  2 12:14:03 2012] fullrun_pn_xmm0067170101_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Jul  2 12:14:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067170101_pi300-10000_cl_pass0_src39.csv
[Mon Jul  2 12:14:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067170101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067170101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 12:14:03 2012] fullrun_pn_xmm0067170101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Jul  2 12:14:03 2012] fullrun_pn_xmm0067170101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Jul  2 12:14:03 2012] Fit fullrun_pn_xmm0067170101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Jul  2 13:34:35 2012] Spatial fit model total counts = 488.235000, observed total counts = 487.000000
[Mon Jul  2 13:34:35 2012] Offset between fit and detection position for source 40 = 1.210317 pixels
[Mon Jul  2 13:34:35 2012] 489.435400 total counts/ 452.760000 bgd. counts: snr = 1.723617
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.210317 pixels
  Position = (470.7, 234.9) = 1 11 30.59 -45 37 28.5
  Extent = 6.6 (3.6-15.3)", rotation angle = 0
  Source counts = 36.7 +/- 22.1
  Background counts = 452.8
  Rate = 0.0009 +/- 0.0005
[Mon Jul  2 13:34:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 13:34:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 13:34:35 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 13:34:35 2012] Source does appear to be extended
[Mon Jul  2 13:34:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 13:34:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  2 13:34:55 2012] Initial guess for spatial extent in simple fitting = 6.58"
[Mon Jul  2 13:34:55 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.988
[Mon Jul  2 13:34:55 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 6.58"
[Mon Jul  2 14:26:30 2012] fullrun_pn_xmm0067170101_pi300-10000_cl_pass1_src39.ximg exists
[Mon Jul  2 14:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067170101_pi300-10000_cl_pass1_src39.csv
[Mon Jul  2 14:26:30 2012] fullrun_pn_xmm0067170101_pi300-10000_cl_pass1_src39_1.ximg exists
[Mon Jul  2 14:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067170101_pi300-10000_cl_pass1_src39.csv
[Mon Jul  2 14:26:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067170101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067170101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:26:31 2012] fullrun_pn_xmm0067170101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Mon Jul  2 14:26:31 2012] fullrun_pn_xmm0067170101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Mon Jul  2 14:26:31 2012] Fit fullrun_pn_xmm0067170101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Mon Jul  2 15:37:43 2012] Spatial fit model total counts = 407.710000, observed total counts = 407.000000
[Mon Jul  2 15:37:43 2012] Offset between fit and detection position for source 40 = 0.199630 pixels
[Mon Jul  2 15:37:43 2012] 404.097300 total counts/ 374.641000 bgd. counts: snr = 1.521845
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.199630 pixels
  Position = (470.8, 235.1) = 1 11 30.54 -45 37 27.7
  Extent = 5.8 (3.1-13.2)", rotation angle = 0
  Source counts = 29.5 +/- 20.1
  Background counts = 374.6
  Rate = 0.0007 +/- 0.0005
  Deleting source due to low Poisson probability