[Mon Jul  2 11:18:42 2012] Detection parameters:
  Position = (113.7, 211.1) = 1 13 58.66 -45 39 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.6 +/- 11.1
  Background counts = 13.2
  Rate = 0.001 +/- 0.0002

[Mon Jul  2 11:18:43 2012] Off-axis axis estimate = 14.81'
[Mon Jul  2 12:59:22 2012] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 12:59:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 12:59:22 2012] Initial guess for spatial extent in simple fitting = 13.84"
[Mon Jul  2 12:59:22 2012] source mask rpix=3.2, npix_max = 54, mask sum = 50, frac = 0.923
[Mon Jul  2 12:59:22 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.84"
[Mon Jul  2 13:34:28 2012] fullrun_mos2_xmm0067170101_pi300-10000_cl_pass0_src29.ximg exists
[Mon Jul  2 13:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067170101_pi300-10000_cl_pass0_src29.csv
[Mon Jul  2 13:34:28 2012] fullrun_mos2_xmm0067170101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Jul  2 13:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067170101_pi300-10000_cl_pass0_src29.csv
[Mon Jul  2 13:34:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067170101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067170101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 13:34:29 2012] fullrun_mos2_xmm0067170101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Jul  2 13:34:29 2012] fullrun_mos2_xmm0067170101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jul  2 13:34:29 2012] Fit fullrun_mos2_xmm0067170101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Jul  2 13:34:44 2012] Spatial fit model total counts = 241.163000, observed total counts = 223.000000
[Mon Jul  2 13:34:44 2012] Offset between fit and detection position for source 14 = 0.147077 pixels
[Mon Jul  2 13:34:44 2012] 240.893100 total counts/ 217.048000 bgd. counts: snr = 1.618532
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.147077 pixels
  Position = (113.9, 211.1) = 1 13 58.60 -45 39 11.8
  Extent = 3.5" x 3.5", rotation angle = 0
  Source counts = 23.8 +/- 15.5
  Background counts = 217.0
  Rate = 0.0005 +/- 0.0003
  Deleting source due to low Poisson probability