[Thu Jun 13 05:55:13 2013] Detection parameters:
  Position = (353.9, 304.6) = 10 58 19.25 -77 0 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.9 +/- 17.1
  Background counts = 28.4
  Rate = 0.005 +/- 0.0005

[Thu Jun 13 05:55:13 2013] Off-axis axis estimate = 4.05'
[Thu Jun 13 05:57:28 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 05:57:28 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Thu Jun 13 05:57:28 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.047
[Thu Jun 13 05:57:28 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.45"
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 06:49:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 06:49:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:58:43 2013] Spatial fit model total counts = -189.425000, observed total counts = 360.000000
[Thu Jun 13 07:58:43 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 07:58:43 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:58:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:58:43 2013] Assessing source extent using major
[Thu Jun 13 07:58:43 2013] Source does appear to be extended
[Thu Jun 13 07:58:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:59:01 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:59:01 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Thu Jun 13 07:59:01 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.047
[Thu Jun 13 07:59:01 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.45"
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jun 13 08:48:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src4.csv
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jun 13 08:48:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src4.csv
[Thu Jun 13 08:48:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jun 13 08:48:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jun 13 08:48:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jun 13 08:48:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:50:02 2013] Spatial fit model total counts = -181.725000, observed total counts = 360.000000
[Thu Jun 13 09:50:02 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 09:50:02 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 09:50:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 09:50:02 2013] Assessing source extent using major
[Thu Jun 13 09:50:02 2013] Source does appear to be extended
[Thu Jun 13 09:50:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 09:50:18 2013] XMMSAS src. selection expression = ellipse(30740.372009, 26455.582184, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 09:50:18 2013] Writing source region out to fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src4_src.reg
[Thu Jun 13 09:50:18 2013] Extracting stamp from image fullrun_pn_xmm0067140201_pi300-10000_cl_sm2.00.img.gz, (316, 267) - (391, 342)
[Thu Jun 13 09:50:18 2013] XMMSAS bgd. selection expression = annulus(30740.372009, 26455.582184, 1087.500000, 2175.000000, X, Y) && !ellipse(28859.392609, 26515.726562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33089.871400, 25427.303600, 739.132821, 320.057609, 253.913958, X, Y)
[Thu Jun 13 09:50:18 2013] Writing fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src4.gif
[Thu Jun 13 09:53:05 2013] Mean detx,y = (-1813.68, -3296.92) 
[Thu Jun 13 09:53:08 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 09:53:28 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 09:53:28 2013] Setting source spectrum file to fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jun 13 09:53:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jun 13 10:23:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 10:23:07 2013] rmf not generated due to insufficient counts
[Thu Jun 13 11:11:02 2013] Updating aperture counts using extracted products
[Thu Jun 13 11:11:02 2013] Total counts from fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 311.00
[Thu Jun 13 11:11:02 2013] Total counts from fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1097.00
[Thu Jun 13 11:11:02 2013] Got source and background scale factors 1070997.000000, 7829380.000000
[Thu Jun 13 11:11:02 2013] User source parameters:
  Position = (353.9, 304.6) = 10 58 19.25 -77 0 4.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 160.9 +/- 18.7
  Background aperture counts = 150.1
  Rate = 0.005 +/- 0.0005

[Thu Jun 13 11:11:02 2013] Updating counts from extracted products
[Thu Jun 13 11:11:02 2013] Set source signif. to 160.94/12.25 = 13.14
[Thu Jun 13 11:11:09 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 11:11:09 2013] Using photon index=1.80, rate=0.00455, arf fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src4.arf
[Thu Jun 13 11:11:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 11:11:09 2013] Updating source flux to 2.1e-14
[Thu Jun 13 11:11:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 11:11:26 2013] xmm0067140201/analysis//spectral/fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete