[Thu Jun 13 05:55:13 2013] Detection parameters:
  Position = (269.8, 205.2) = 11 0 8.06 -77 7 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.6 +/- 12.3
  Background counts = 28.1
  Rate = 0.003 +/- 0.0005

[Thu Jun 13 05:55:13 2013] Off-axis axis estimate = 7.07'
[Thu Jun 13 05:57:28 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 05:57:28 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Thu Jun 13 05:57:28 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.156
[Thu Jun 13 05:57:28 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.97"
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src33.csv
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src33.csv
[Thu Jun 13 06:49:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 06:49:48 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jun 13 06:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jun 13 06:49:48 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jun 13 06:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jun 13 06:49:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:58:43 2013] Source 33 is offset by -8.199124 and -1.435842 pixels which is larger than
2 X fitted extent = 1.162103 x 1.162103, not incorporating fit results
[Thu Jun 13 07:58:43 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:58:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:58:43 2013] Assessing source extent using major
[Thu Jun 13 07:58:43 2013] Source does appear to be extended
[Thu Jun 13 07:58:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:59:01 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:59:01 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Thu Jun 13 07:59:01 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.156
[Thu Jun 13 07:59:01 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 9.97"
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src32.ximg exists
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu Jun 13 08:48:08 2013] Fit fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src32 appears to have run properly
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu Jun 13 08:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu Jun 13 08:48:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Jun 13 08:48:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:50:02 2013] Spatial fit model total counts = 312.299000, observed total counts = 301.000000
[Thu Jun 13 09:50:02 2013] Offset between fit and detection position for source 33 = 0.279919 pixels
[Thu Jun 13 09:50:02 2013] 319.218000 total counts/ 233.169000 bgd. counts: snr = 5.635214
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.279919 pixels
  Position = (269.6, 205.0) = 11 0 8.29 -77 7 30.9
  Extent = 12.8 (7.5-19.9)" x 5.0 (3.5-7.1)", rotation angle = 350 (333-4) degrees
  Source counts = 86.0 +/- 17.9
  Background counts = 233.2
  Rate = 0.002 +/- 0.0005
[Thu Jun 13 09:50:02 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 09:50:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 09:50:02 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 09:50:02 2013] Source does appear to be extended
[Thu Jun 13 09:50:02 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Thu Jun 13 09:50:19 2013] XMMSAS src. selection expression = ellipse(23406.912000, 17782.939200, 765.246022, 298.917609, 350.043980, X, Y)
[Thu Jun 13 09:50:19 2013] Writing source region out to fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src33_src.reg
[Thu Jun 13 09:50:19 2013] Extracting stamp from image fullrun_pn_xmm0067140201_pi300-10000_cl_sm2.00.img.gz, (226, 161) - (314, 249)
[Thu Jun 13 09:50:19 2013] XMMSAS bgd. selection expression = annulus(23406.912000, 17782.939200, 1275.410037, 2550.820073, X, Y) && !ellipse(25384.145111, 19093.513840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24169.819672, 20611.838806, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 09:50:19 2013] Writing fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src33.gif
[Thu Jun 13 10:09:47 2013] Mean detx,y = (7176.09, 3636.01) 
[Thu Jun 13 10:09:50 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 10:10:13 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 10:10:13 2013] Setting source spectrum file to fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Jun 13 10:10:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Thu Jun 13 10:34:53 2013] Not generating rmf since there are only 86 counts
[Thu Jun 13 10:34:53 2013] rmf not generated due to insufficient counts
[Thu Jun 13 11:11:07 2013] Updating aperture counts using extracted products
[Thu Jun 13 11:11:07 2013] Total counts from fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 165.00
[Thu Jun 13 11:11:08 2013] Total counts from fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src33_bgd.pi.gz = 1639.00
[Thu Jun 13 11:11:08 2013] Got source and background scale factors 723200.000000, 11623982.000000
[Thu Jun 13 11:11:08 2013] User source parameters:
  Position = (269.6, 205.0) = 11 0 8.29 -77 7 30.9
  Extent = 12.8 (7.5-19.9)" x 5.0 (3.5-7.1)", rotation angle = 350 (333-4) degrees
  Source aperture counts = 63.0 +/- 13.9
  Background aperture counts = 102.0
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 11:11:09 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 11:11:09 2013] Using photon index=1.80, rate=0.00243, arf fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src33.arf
[Thu Jun 13 11:11:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 11:11:09 2013] Updating source flux to 1.3e-14
[Thu Jun 13 11:11:22 2013] Flag b found in src. 33 procflags, skipping spectral fitting
[Thu Jun 13 11:11:22 2013] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 11:11:26 2013] xmm0067140201/analysis//spectral/fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete