[Thu Jun 13 05:55:13 2013] Detection parameters:
  Position = (207.7, 370.0) = 11 1 27.06 -76 55 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 355.8 +/- 24.0
  Background counts = 24.3
  Rate = 0.01 +/- 0.0007

[Thu Jun 13 05:55:13 2013] Off-axis axis estimate = 8.38'
[Thu Jun 13 05:57:28 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 05:57:28 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Thu Jun 13 05:57:28 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Thu Jun 13 05:57:28 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.62"
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src3.csv
[Thu Jun 13 06:49:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 06:49:47 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 13 06:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 13 06:49:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:58:43 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.350335 pixels away
[Thu Jun 13 07:58:43 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:58:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:58:43 2013] Assessing source extent using major
[Thu Jun 13 07:58:43 2013] Source does appear to be extended
[Thu Jun 13 07:58:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 07:59:01 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:59:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 07:59:01 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Thu Jun 13 07:59:01 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Thu Jun 13 07:59:01 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.62"
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 13 08:48:08 2013] Fit fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 13 08:48:08 2013] fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 13 08:48:08 2013] Fit fullrun_pn_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 13 09:50:02 2013] Spatial fit model total counts = 562.480000, observed total counts = 525.000000
[Thu Jun 13 09:50:02 2013] Offset between fit and detection position for source 3 = 0.024740 pixels
[Thu Jun 13 09:50:02 2013] 561.124000 total counts/ 295.434000 bgd. counts: snr = 15.457703
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.024740 pixels
  Position = (207.7, 370.0) = 11 1 27.04 -76 55 31.4
  Extent = 7.1 (6.0-8.3)" x 5.4 (4.4-6.5)", rotation angle = 327 (124-353) degrees
  Source counts = 265.7 +/- 23.7
  Background counts = 295.4
  Rate = 0.008 +/- 0.0007
[Thu Jun 13 09:50:02 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 09:50:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 09:50:02 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 09:50:02 2013] Source does appear to be extended
[Thu Jun 13 09:50:02 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.93
[Thu Jun 13 09:50:18 2013] XMMSAS src. selection expression = ellipse(18024.062800, 32142.114000, 425.661612, 324.402009, 326.609242, X, Y)
[Thu Jun 13 09:50:18 2013] Writing source region out to fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 13 09:50:18 2013] Extracting stamp from image fullrun_pn_xmm0067140201_pi300-10000_cl_sm2.00.img.gz, (183, 346) - (232, 394)
[Thu Jun 13 09:50:18 2013] XMMSAS bgd. selection expression = annulus(18024.062800, 32142.114000, 709.436020, 1418.872041, X, Y)
[Thu Jun 13 09:50:18 2013] Writing fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src3.gif
[Thu Jun 13 09:52:24 2013] Mean detx,y = (-6924.24, 9638.08) 
[Thu Jun 13 09:52:27 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 09:52:48 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 09:52:48 2013] Setting source spectrum file to fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 13 09:52:48 2013] Setting bgd. spectrum file to fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 13 11:11:02 2013] Updating aperture counts using extracted products
[Thu Jun 13 11:11:02 2013] Total counts from fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 328.00
[Thu Jun 13 11:11:02 2013] Total counts from fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 541.00
[Thu Jun 13 11:11:02 2013] Got source and background scale factors 407932.000000, 4176251.000000
[Thu Jun 13 11:11:02 2013] User source parameters:
  Position = (207.7, 370.0) = 11 1 27.04 -76 55 31.4
  Extent = 7.1 (6.0-8.3)" x 5.4 (4.4-6.5)", rotation angle = 327 (124-353) degrees
  Source aperture counts = 275.2 +/- 19.1
  Background aperture counts = 52.8
  Rate = 0.008 +/- 0.0005

[Thu Jun 13 11:11:09 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 11:11:09 2013] Using photon index=1.80, rate=0.00751, arf fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src3.arf
[Thu Jun 13 11:11:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 11:11:09 2013] Updating source flux to 5.5e-14
[Thu Jun 13 11:11:26 2013] xmm0067140201/analysis//spectral/fullrun_pn_xmm0067140201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete