[Thu Jun 13 05:55:58 2013] Detection parameters:
  Position = (285.9, 287.7) = 10 59 46.99 -77 1 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.5 +/- 9.1
  Background counts = 10.8
  Rate = 0.001 +/- 0.0003

[Thu Jun 13 05:55:58 2013] Off-axis axis estimate = 1.20'
[Thu Jun 13 07:27:37 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:27:37 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Thu Jun 13 07:27:37 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Thu Jun 13 07:27:37 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.03"
[Thu Jun 13 07:58:35 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun 13 07:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_src15.csv
[Thu Jun 13 07:58:35 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun 13 07:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_src15.csv
[Thu Jun 13 07:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:58:36 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun 13 07:58:36 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun 13 07:58:36 2013] Fit fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Jun 13 07:58:51 2013] Spatial fit model total counts = 132.610000, observed total counts = 120.000000
[Thu Jun 13 07:58:51 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 07:58:51 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:58:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:58:51 2013] Assessing source extent using major
[Thu Jun 13 07:58:51 2013] Source does appear to be extended
[Thu Jun 13 07:58:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 09:17:44 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:17:44 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Thu Jun 13 09:17:44 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Thu Jun 13 09:17:44 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 7.03"
[Thu Jun 13 09:49:54 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src15.ximg exists
[Thu Jun 13 09:49:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src15.csv
[Thu Jun 13 09:49:54 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Jun 13 09:49:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src15.csv
[Thu Jun 13 09:49:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:49:54 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Jun 13 09:49:54 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jun 13 09:49:54 2013] Fit fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Jun 13 09:50:09 2013] Spatial fit model total counts = 132.592000, observed total counts = 120.000000
[Thu Jun 13 09:50:09 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 09:50:09 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 09:50:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 09:50:09 2013] Assessing source extent using major
[Thu Jun 13 09:50:09 2013] Source does appear to be extended
[Thu Jun 13 09:50:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 10:55:27 2013] XMMSAS src. selection expression = ellipse(24821.751495, 24983.904755, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 10:55:27 2013] Writing source region out to fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 13 10:55:27 2013] Extracting stamp from image fullrun_mos2_xmm0067140201_pi300-10000_cl_sm2.00.img.gz, (248, 250) - (323, 325)
[Thu Jun 13 10:55:27 2013] XMMSAS bgd. selection expression = annulus(24821.751495, 24983.904755, 1087.500000, 2175.000000, X, Y)
[Thu Jun 13 10:55:27 2013] Writing fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src12.gif
[Thu Jun 13 10:59:46 2013] Mean detx,y = (196.65, -2630.22) 
[Thu Jun 13 10:59:47 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 10:59:58 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 10:59:58 2013] Setting source spectrum file to fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 13 10:59:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 13 11:09:41 2013] Not generating rmf since there are only 41 counts
[Thu Jun 13 11:09:41 2013] rmf not generated due to insufficient counts
[Thu Jun 13 11:11:15 2013] Updating aperture counts using extracted products
[Thu Jun 13 11:11:15 2013] Total counts from fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 100.00
[Thu Jun 13 11:11:15 2013] Total counts from fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src12_bgd.pi.gz = 469.00
[Thu Jun 13 11:11:15 2013] Got source and background scale factors 1297948.000000, 6634385.000000
[Thu Jun 13 11:11:15 2013] User source parameters:
  Position = (285.9, 287.7) = 10 59 46.99 -77 1 29.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 8.2 +/- 11.0
  Background aperture counts = 91.8
  Rate = 0.0002 +/- 0.0003

[Thu Jun 13 11:11:15 2013] Updating counts from extracted products
[Thu Jun 13 11:11:15 2013] Set source signif. to 8.25/9.58 = 0.86
[Thu Jun 13 11:11:16 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 11:11:16 2013] Using photon index=1.80, rate=0.000217, arf fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src12.arf
[Thu Jun 13 11:11:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 11:11:16 2013] Updating source flux to 2.6e-15
[Thu Jun 13 11:11:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 11:11:22 2013] xmm0067140201/analysis//spectral/fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete