[Thu Jun 13 05:55:58 2013] Detection parameters:
  Position = (236.7, 305.8) = 11 0 50.38 -77 0 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.2 +/- 9.2
  Background counts = 8.8
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 05:55:58 2013] Off-axis axis estimate = 4.51'
[Thu Jun 13 07:27:37 2013] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 07:27:37 2013] Initial guess for spatial extent in simple fitting = 8.68"
[Thu Jun 13 07:27:37 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.802
[Thu Jun 13 07:27:37 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.68"
[Thu Jun 13 07:58:35 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_src10.ximg exists
[Thu Jun 13 07:58:35 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Jun 13 07:58:35 2013] Fit fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_src10 appears to have run properly
[Thu Jun 13 07:58:36 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Jun 13 07:58:36 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jun 13 07:58:36 2013] Fit fullrun_mos2_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Jun 13 07:58:51 2013] Spatial fit model total counts = 98.160600, observed total counts = 100.000000
[Thu Jun 13 07:58:51 2013] Offset between fit and detection position for source 11 = 0.314437 pixels
[Thu Jun 13 07:58:51 2013] 93.654200 total counts/ 46.288700 bgd. counts: snr = 6.961850
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.314437 pixels
  Position = (236.6, 306.2) = 11 0 50.45 -77 0 10.0
  Extent = 5.1 (3.3-7.0)" x 2.6 (2.2-4.0)", rotation angle = 124 (24-62) degrees
  Source counts = 47.4 +/- 9.7
  Background counts = 46.3
  Rate = 0.001 +/- 0.0003
[Thu Jun 13 07:58:51 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:58:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:58:51 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 07:58:51 2013] Source does appear to be extended
[Thu Jun 13 07:58:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.84
[Thu Jun 13 09:17:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 09:17:44 2013] Initial guess for spatial extent in simple fitting = 3.82"
[Thu Jun 13 09:17:44 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.184
[Thu Jun 13 09:17:44 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 3.82"
[Thu Jun 13 09:49:54 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src10.ximg exists
[Thu Jun 13 09:49:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src10.csv
[Thu Jun 13 09:49:54 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Jun 13 09:49:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src10.csv
[Thu Jun 13 09:49:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:49:54 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Jun 13 09:49:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Jun 13 09:49:54 2013] fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jun 13 09:49:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Jun 13 09:49:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:50:09 2013] Warning, spatial fit 10 centroid is now closest to src. 10
[Thu Jun 13 09:50:09 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 09:50:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 09:50:09 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 09:50:09 2013] Source does appear to be extended
[Thu Jun 13 09:50:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.84
[Thu Jun 13 10:55:27 2013] XMMSAS src. selection expression = ellipse(20538.535200, 26587.325620, 304.103409, 154.594204, 123.595891, X, Y)
[Thu Jun 13 10:55:27 2013] Writing source region out to fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 13 10:55:27 2013] Extracting stamp from image fullrun_mos2_xmm0067140201_pi300-10000_cl_sm2.00.img.gz, (219, 289) - (254, 324)
[Thu Jun 13 10:55:27 2013] XMMSAS bgd. selection expression = annulus(20538.535200, 26587.325620, 506.839015, 1013.678029, X, Y)
[Thu Jun 13 10:55:27 2013] Writing fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src11.gif
[Thu Jun 13 10:58:34 2013] Mean detx,y = (1553.85, -7039.04) 
[Thu Jun 13 10:58:35 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 10:58:42 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 10:58:43 2013] Setting source spectrum file to fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 13 10:58:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 13 11:09:11 2013] Not generating rmf since there are only 47 counts
[Thu Jun 13 11:09:11 2013] rmf not generated due to insufficient counts
[Thu Jun 13 11:11:14 2013] Updating aperture counts using extracted products
[Thu Jun 13 11:11:14 2013] Total counts from fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 48.00
[Thu Jun 13 11:11:14 2013] Total counts from fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 62.00
[Thu Jun 13 11:11:14 2013] Got source and background scale factors 139604.000000, 1372272.000000
[Thu Jun 13 11:11:15 2013] User source parameters:
  Position = (236.6, 306.2) = 11 0 50.45 -77 0 10.0
  Extent = 5.1 (3.3-7.0)" x 2.6 (2.2-4.0)", rotation angle = 124 (24-62) degrees
  Source aperture counts = 41.7 +/- 8.0
  Background aperture counts = 6.3
  Rate = 0.001 +/- 0.0002

[Thu Jun 13 11:11:16 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 11:11:16 2013] Using photon index=1.80, rate=0.00125, arf fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src11.arf
[Thu Jun 13 11:11:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 11:11:16 2013] Updating source flux to 3.1e-14
[Thu Jun 13 11:11:20 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 11:11:22 2013] xmm0067140201/analysis//spectral/fullrun_mos2_xmm0067140201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete