[Thu Jun 13 05:55:36 2013] Detection parameters:
  Position = (208.2, 370.8) = 11 1 26.48 -76 55 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.1 +/- 12.8
  Background counts = 8.0
  Rate = 0.003 +/- 0.0003

[Thu Jun 13 05:55:36 2013] Off-axis axis estimate = 8.39'
[Thu Jun 13 06:49:48 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 06:49:48 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Thu Jun 13 06:49:48 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.040
[Thu Jun 13 06:49:48 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.62"
[Thu Jun 13 07:27:36 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 13 07:27:36 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 13 07:27:36 2013] Fit fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Jun 13 07:27:36 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 13 07:27:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 07:27:36 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 13 07:27:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 07:27:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 07:58:48 2013] Spatial fit model total counts = 156.359000, observed total counts = 142.000000
[Thu Jun 13 07:58:48 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 07:58:48 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:58:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:58:48 2013] Assessing source extent using major
[Thu Jun 13 07:58:48 2013] Source does appear to be extended
[Thu Jun 13 07:58:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 08:48:08 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 08:48:08 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Thu Jun 13 08:48:08 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.040
[Thu Jun 13 08:48:08 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.62"
[Thu Jun 13 09:17:43 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jun 13 09:17:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src6.csv
[Thu Jun 13 09:17:43 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jun 13 09:17:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src6.csv
[Thu Jun 13 09:17:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:17:44 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jun 13 09:17:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 13 09:17:44 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jun 13 09:17:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 13 09:17:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:50:06 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.099035 pixels away
[Thu Jun 13 09:50:06 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 09:50:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 09:50:06 2013] Assessing source extent using major
[Thu Jun 13 09:50:06 2013] Source does appear to be extended
[Thu Jun 13 09:50:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 10:36:16 2013] XMMSAS src. selection expression = ellipse(18061.092422, 32209.548401, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 10:36:16 2013] Writing source region out to fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun 13 10:36:16 2013] Extracting stamp from image fullrun_mos1_xmm0067140201_pi300-10000_cl_sm2.00.img.gz, (171, 333) - (246, 408)
[Thu Jun 13 10:36:16 2013] XMMSAS bgd. selection expression = annulus(18061.092422, 32209.548401, 1087.500000, 2175.000000, X, Y)
[Thu Jun 13 10:36:16 2013] Writing fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src9.gif
[Thu Jun 13 10:38:29 2013] Mean detx,y = (-9536.36, -7280.28) 
[Thu Jun 13 10:38:30 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 10:38:43 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 10:38:43 2013] Setting source spectrum file to fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 13 10:38:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun 13 10:53:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 10:53:19 2013] rmf not generated due to insufficient counts
[Thu Jun 13 11:11:10 2013] Updating aperture counts using extracted products
[Thu Jun 13 11:11:10 2013] Total counts from fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 123.00
[Thu Jun 13 11:11:10 2013] Total counts from fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 400.00
[Thu Jun 13 11:11:10 2013] Got source and background scale factors 1180502.000000, 10471654.000000
[Thu Jun 13 11:11:10 2013] User source parameters:
  Position = (208.2, 370.8) = 11 1 26.48 -76 55 27.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 77.9 +/- 12.1
  Background aperture counts = 45.1
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 11:11:10 2013] Updating counts from extracted products
[Thu Jun 13 11:11:10 2013] Set source signif. to 77.91/6.72 = 11.60
[Thu Jun 13 11:11:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 11:11:13 2013] Using photon index=1.80, rate=0.00205, arf fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src9.arf
[Thu Jun 13 11:11:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 11:11:13 2013] Updating source flux to 4.7e-14
[Thu Jun 13 11:11:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 11:11:20 2013] xmm0067140201/analysis//spectral/fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete