[Thu Jun 13 05:55:36 2013] Detection parameters:
  Position = (445.3, 143.9) = 10 56 18.50 -77 11 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.0 +/- 11.0
  Background counts = 7.9
  Rate = 0.001 +/- 0.0003

[Thu Jun 13 05:55:36 2013] Off-axis axis estimate = 15.46'
[Thu Jun 13 06:49:48 2013] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 06:49:48 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 06:49:48 2013] Initial guess for spatial extent in simple fitting = 14.16"
[Thu Jun 13 06:49:48 2013] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.869
[Thu Jun 13 06:49:48 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 14.16"
[Thu Jun 13 07:27:36 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_src14.ximg exists
[Thu Jun 13 07:27:36 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Jun 13 07:27:36 2013] Fit fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_src14 appears to have run properly
[Thu Jun 13 07:27:37 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Jun 13 07:27:37 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Jun 13 07:27:37 2013] Fit fullrun_mos1_xmm0067140201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Jun 13 07:58:48 2013] Warning, spatial fit 14 centroid is now closest to src. 2
[Thu Jun 13 07:58:48 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 07:58:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 07:58:48 2013] Assessing source extent using major
[Thu Jun 13 07:58:48 2013] Source does appear to be extended
[Thu Jun 13 07:58:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 08:48:08 2013] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 08:48:08 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 08:48:08 2013] Initial guess for spatial extent in simple fitting = 14.16"
[Thu Jun 13 08:48:08 2013] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.869
[Thu Jun 13 08:48:08 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 14.16"
[Thu Jun 13 09:17:44 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src14.ximg exists
[Thu Jun 13 09:17:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src14.csv
[Thu Jun 13 09:17:44 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Jun 13 09:17:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src14.csv
[Thu Jun 13 09:17:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:17:44 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Jun 13 09:17:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu Jun 13 09:17:44 2013] fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Jun 13 09:17:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu Jun 13 09:17:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067140201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 09:50:06 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 19.416934 pixels away
[Thu Jun 13 09:50:06 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 09:50:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 09:50:06 2013] Assessing source extent using major
[Thu Jun 13 09:50:06 2013] Source does appear to be extended
[Thu Jun 13 09:50:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 10:36:16 2013] XMMSAS src. selection expression = ellipse(38696.177917, 12473.161118, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 10:36:16 2013] Writing source region out to fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src24_src.reg
[Thu Jun 13 10:36:16 2013] Extracting stamp from image fullrun_mos1_xmm0067140201_pi300-10000_cl_sm2.00.img.gz, (408, 106) - (483, 181)
[Thu Jun 13 10:36:16 2013] XMMSAS bgd. selection expression = annulus(38696.177917, 12473.161118, 1087.500000, 2175.000000, X, Y) && !ellipse(37938.638800, 12740.315600, 735.389621, 323.863209, 314.771800, X, Y)
[Thu Jun 13 10:36:16 2013] Writing fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src24.gif
[Thu Jun 13 10:40:27 2013] Mean detx,y = (11879.44, 11317.45) 
[Thu Jun 13 10:40:28 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 10:40:45 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 10:40:45 2013] Setting source spectrum file to fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Jun 13 10:40:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Jun 13 10:54:13 2013] Not generating rmf since there are only 57 counts
[Thu Jun 13 10:54:13 2013] rmf not generated due to insufficient counts
[Thu Jun 13 11:11:11 2013] Updating aperture counts using extracted products
[Thu Jun 13 11:11:11 2013] Total counts from fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 110.00
[Thu Jun 13 11:11:11 2013] Total counts from fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src24_bgd.pi.gz = 280.00
[Thu Jun 13 11:11:11 2013] Got source and background scale factors 1131702.000000, 5810939.000000
[Thu Jun 13 11:11:11 2013] User source parameters:
  Position = (445.3, 143.9) = 10 56 18.50 -77 11 48.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 55.5 +/- 11.5
  Background aperture counts = 54.5
  Rate = 0.001 +/- 0.0003

[Thu Jun 13 11:11:11 2013] Updating counts from extracted products
[Thu Jun 13 11:11:11 2013] Set source signif. to 55.47/7.38 = 7.51
[Thu Jun 13 11:11:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 11:11:13 2013] Using photon index=1.80, rate=0.00146, arf fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src24.arf
[Thu Jun 13 11:11:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 11:11:13 2013] Updating source flux to 4.2e-14
[Thu Jun 13 11:11:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 11:11:20 2013] xmm0067140201/analysis//spectral/fullrun_mos1_xmm0067140201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete