[Tue Jun 25 05:28:56 2013] Detection parameters:
  Position = (174.4, 276.9) = 23 18 57.44 0 13 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.5 +/- 12.0
  Background counts = 15.2
  Rate = 0.004 +/- 0.001

[Tue Jun 25 05:28:56 2013] Off-axis axis estimate = 9.13'
[Tue Jun 25 06:05:26 2013] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 06:05:26 2013] Initial guess for spatial extent in simple fitting = 10.99"
[Tue Jun 25 06:05:26 2013] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.955
[Tue Jun 25 06:05:26 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.99"
[Tue Jun 25 06:40:46 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jun 25 06:40:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src9.csv
[Tue Jun 25 06:40:46 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jun 25 06:40:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src9.csv
[Tue Jun 25 06:40:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:40:46 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jun 25 06:40:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 25 06:40:46 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jun 25 06:40:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jun 25 06:40:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:40:53 2013] Spatial fit model total counts = 1153.410000, observed total counts = 2828.000000
[Tue Jun 25 06:40:53 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 06:40:53 2013] Warning, spatial fit 9 centroid is now closest to src. 8
[Tue Jun 25 06:40:53 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 06:40:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 06:40:53 2013] Assessing source extent using major
[Tue Jun 25 06:40:53 2013] Source does appear to be extended
[Tue Jun 25 06:40:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 06:40:53 2013] Source is confused with source 3
[Tue Jun 25 07:00:28 2013] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 07:00:28 2013] Initial guess for spatial extent in simple fitting = 10.99"
[Tue Jun 25 07:00:28 2013] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.955
[Tue Jun 25 07:00:28 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.99"
[Tue Jun 25 07:33:12 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jun 25 07:33:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src9.csv
[Tue Jun 25 07:33:12 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jun 25 07:33:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src9.csv
[Tue Jun 25 07:33:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 07:33:12 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jun 25 07:33:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Jun 25 07:33:12 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jun 25 07:33:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Jun 25 07:33:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 07:33:18 2013] Warning, spatial fit 9 centroid is now closest to src. 3
[Tue Jun 25 07:33:18 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 07:33:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 07:33:18 2013] Assessing source extent using major
[Tue Jun 25 07:33:18 2013] Source does appear to be extended
[Tue Jun 25 07:33:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 08:04:21 2013] XMMSAS src. selection expression = ellipse(15121.600632, 24040.469299, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 08:04:21 2013] Writing source region out to fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src7_src.reg
[Tue Jun 25 08:04:21 2013] Extracting stamp from image fullrun_mos2_xmm0066950401_pi300-10000_cl_sm2.00.img.gz, (137, 239) - (212, 314)
[Tue Jun 25 08:04:21 2013] XMMSAS bgd. selection expression = annulus(15121.600632, 24040.469299, 1087.500000, 2175.000000, X, Y) && !ellipse(15352.508600, 25461.869600, 2088.547260, 1381.276840, 83.613400, X, Y) && !ellipse(14900.820343, 24479.486359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15799.854416, 23615.184052, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 08:04:21 2013] Writing fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src7.gif
[Tue Jun 25 08:09:54 2013] Mean detx,y = (10650.12, -7005.23) 
[Tue Jun 25 08:09:55 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 08:10:14 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 08:10:14 2013] Setting source spectrum file to fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jun 25 08:10:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jun 25 08:18:39 2013] Not generating rmf since there are only 50 counts
[Tue Jun 25 08:18:39 2013] rmf not generated due to insufficient counts
[Tue Jun 25 08:19:12 2013] Updating aperture counts using extracted products
[Tue Jun 25 08:19:12 2013] Total counts from fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 397.00
[Tue Jun 25 08:19:13 2013] Total counts from fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src7_bgd.pi.gz = 566.00
[Tue Jun 25 08:19:13 2013] Got source and background scale factors 1100778.000000, 6565908.000000
[Tue Jun 25 08:19:13 2013] User source parameters:
  Position = (174.4, 276.9) = 23 18 57.44 0 13 26.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 302.1 +/- 20.9
  Background aperture counts = 94.9
  Rate = 0.02 +/- 0.002

[Tue Jun 25 08:19:13 2013] Updating counts from extracted products
[Tue Jun 25 08:19:13 2013] Set source signif. to 302.11/9.74 = 31.01
[Tue Jun 25 08:19:13 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 08:19:13 2013] Using photon index=1.80, rate=0.024, arf fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src7.arf
[Tue Jun 25 08:19:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 08:19:13 2013] Updating source flux to 7.4e-13
[Tue Jun 25 08:19:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 08:19:17 2013] xmm0066950401/analysis//spectral/fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete