[Tue Jun 25 05:28:56 2013] Detection parameters:
  Position = (171.8, 281.9) = 23 18 58.17 0 13 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.1 +/- 18.5
  Background counts = 13.3
  Rate = 0.008 +/- 0.001

[Tue Jun 25 05:28:56 2013] Off-axis axis estimate = 9.26'
[Tue Jun 25 06:05:26 2013] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 06:05:26 2013] Initial guess for spatial extent in simple fitting = 11.06"
[Tue Jun 25 06:05:26 2013] source mask rpix=2.5, npix_max = 37, mask sum = 28, frac = 0.757
[Tue Jun 25 06:05:26 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.06"
[Tue Jun 25 06:40:45 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jun 25 06:40:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src4.csv
[Tue Jun 25 06:40:45 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jun 25 06:40:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src4.csv
[Tue Jun 25 06:40:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:40:46 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jun 25 06:40:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun 25 06:40:46 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jun 25 06:40:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun 25 06:40:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066950401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:40:53 2013] Warning, spatial fit 4 centroid is now closest to src. 7
[Tue Jun 25 06:40:53 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 06:40:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 06:40:53 2013] Assessing source extent using major
[Tue Jun 25 06:40:53 2013] Source does appear to be extended
[Tue Jun 25 06:40:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 06:40:53 2013] Source is confused with source 7
[Tue Jun 25 07:00:28 2013] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 07:00:28 2013] Initial guess for spatial extent in simple fitting = 11.06"
[Tue Jun 25 07:00:28 2013] source mask rpix=2.5, npix_max = 37, mask sum = 28, frac = 0.757
[Tue Jun 25 07:00:28 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.06"
[Tue Jun 25 07:33:12 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jun 25 07:33:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src4.csv
[Tue Jun 25 07:33:12 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jun 25 07:33:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src4.csv
[Tue Jun 25 07:33:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 07:33:12 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jun 25 07:33:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Jun 25 07:33:12 2013] fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jun 25 07:33:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Jun 25 07:33:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066950401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 07:33:18 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.777515 pixels away
[Tue Jun 25 07:33:18 2013] Spatial fit model total counts = -4.746110, observed total counts = 735.000000
[Tue Jun 25 07:33:18 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 07:33:18 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 07:33:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 07:33:18 2013] Assessing source extent using major
[Tue Jun 25 07:33:18 2013] Source does appear to be extended
[Tue Jun 25 07:33:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 08:04:21 2013] XMMSAS src. selection expression = ellipse(14900.820343, 24479.486359, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 08:04:21 2013] Writing source region out to fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 25 08:04:21 2013] Extracting stamp from image fullrun_mos2_xmm0066950401_pi300-10000_cl_sm2.00.img.gz, (134, 244) - (209, 319)
[Tue Jun 25 08:04:21 2013] XMMSAS bgd. selection expression = annulus(14900.820343, 24479.486359, 1087.500000, 2175.000000, X, Y) && !ellipse(15352.508600, 25461.869600, 2088.547260, 1381.276840, 83.613400, X, Y) && !ellipse(15799.854416, 23615.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15121.600632, 24040.469299, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 08:04:21 2013] Writing fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src3.gif
[Tue Jun 25 08:08:52 2013] Mean detx,y = (10883.62, -6564.00) 
[Tue Jun 25 08:08:53 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 08:09:15 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 08:09:15 2013] Setting source spectrum file to fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 25 08:09:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 25 08:17:50 2013] Not generating rmf since there are only 95 counts
[Tue Jun 25 08:17:50 2013] rmf not generated due to insufficient counts
[Tue Jun 25 08:19:12 2013] Updating aperture counts using extracted products
[Tue Jun 25 08:19:12 2013] Total counts from fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 874.00
[Tue Jun 25 08:19:12 2013] Total counts from fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 506.00
[Tue Jun 25 08:19:12 2013] Got source and background scale factors 1074222.000000, 5609158.000000
[Tue Jun 25 08:19:12 2013] User source parameters:
  Position = (171.8, 281.9) = 23 18 58.17 0 13 59.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 777.1 +/- 30.6
  Background aperture counts = 96.9
  Rate = 0.06 +/- 0.002

[Tue Jun 25 08:19:12 2013] Updating counts from extracted products
[Tue Jun 25 08:19:12 2013] Set source signif. to 777.09/9.84 = 78.94
[Tue Jun 25 08:19:13 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 08:19:13 2013] Using photon index=1.80, rate=0.0618, arf fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src3.arf
[Tue Jun 25 08:19:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 08:19:13 2013] Getting flux using calc_pl_flux failed
[Tue Jun 25 08:19:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 08:19:17 2013] xmm0066950401/analysis//spectral/fullrun_mos2_xmm0066950401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete