[Mon Jun  3 18:12:40 2013] Detection parameters:
  Position = (290.5, 356.4) = 11 39 15.35 17 9 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.8 +/- 8.5
  Background counts = 12.2
  Rate = 0.003 +/- 0.0008

[Mon Jun  3 18:12:40 2013] Off-axis axis estimate = 4.24'
[Mon Jun  3 18:26:09 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 18:26:09 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Mon Jun  3 18:26:09 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Mon Jun  3 18:26:09 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.55"
[Mon Jun  3 18:46:03 2013] fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jun  3 18:46:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_src10.csv
[Mon Jun  3 18:46:03 2013] fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jun  3 18:46:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_src10.csv
[Mon Jun  3 18:46:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 18:46:03 2013] fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jun  3 18:46:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Jun  3 18:46:03 2013] fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jun  3 18:46:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Jun  3 18:46:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066950201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 19:09:38 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.229586 pixels away
[Mon Jun  3 19:09:38 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 19:09:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 19:09:38 2013] Assessing source extent using major
[Mon Jun  3 19:09:38 2013] Source does appear to be extended
[Mon Jun  3 19:09:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 19:22:24 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 19:22:24 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Mon Jun  3 19:22:24 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Mon Jun  3 19:22:24 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.55"
[Mon Jun  3 19:41:41 2013] fullrun_mos1_xmm0066950201_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jun  3 19:41:41 2013] fullrun_mos1_xmm0066950201_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jun  3 19:41:41 2013] Fit fullrun_mos1_xmm0066950201_pi300-10000_cl_pass1_src10 appears to have run properly
[Mon Jun  3 19:41:41 2013] fullrun_mos1_xmm0066950201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jun  3 19:41:42 2013] fullrun_mos1_xmm0066950201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jun  3 19:41:42 2013] Fit fullrun_mos1_xmm0066950201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Jun  3 20:06:32 2013] Spatial fit model total counts = 124.466000, observed total counts = 114.000000
[Mon Jun  3 20:06:32 2013] Offset between fit and detection position for source 7 = 0.243693 pixels
[Mon Jun  3 20:06:32 2013] 121.535600 total counts/ 98.196800 bgd. counts: snr = 2.355211
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.243693 pixels
  Position = (290.2, 356.4) = 11 39 15.43 17 9 51.5
  Extent = 4.8 (3.2-8.2)" x 2.5 (2.1-4.3)", rotation angle = 10 (341-40) degrees
  Source counts = 23.3 +/- 11.0
  Background counts = 98.2
  Rate = 0.002 +/- 0.0009
[Mon Jun  3 20:06:32 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 20:06:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 20:06:32 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 20:06:32 2013] Source does appear to be extended
[Mon Jun  3 20:06:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.73
[Mon Jun  3 20:16:12 2013] XMMSAS src. selection expression = ellipse(25202.132800, 30958.554200, 285.849608, 147.156004, 9.541850, X, Y)
[Mon Jun  3 20:16:12 2013] Writing source region out to fullrun_mos1_xmm0066950201_pi300-10000_pass1_cl_src7_src.reg
[Mon Jun  3 20:16:12 2013] Extracting stamp from image fullrun_mos1_xmm0066950201_pi300-10000_cl_sm2.00.img.gz, (274, 340) - (307, 373)
[Mon Jun  3 20:16:12 2013] XMMSAS bgd. selection expression = annulus(25202.132800, 30958.554200, 476.416014, 952.832027, X, Y) && !ellipse(25359.647156, 29500.714935, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 20:16:12 2013] Writing fullrun_mos1_xmm0066950201_pi300-10000_pass1_cl_src7.gif
[Mon Jun  3 20:22:58 2013] Mean detx,y = (3515.70, -42.27) 
[Mon Jun  3 20:23:00 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 20:23:13 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 20:23:13 2013] Setting source spectrum file to fullrun_mos1_xmm0066950201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun  3 20:23:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0066950201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jun  3 20:26:00 2013] Not generating rmf since there are only 23 counts
[Mon Jun  3 20:26:00 2013] rmf not generated due to insufficient counts
[Mon Jun  3 20:37:06 2013] Updating aperture counts using extracted products
[Mon Jun  3 20:37:06 2013] Total counts from fullrun_mos1_xmm0066950201_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 30.00
[Mon Jun  3 20:37:06 2013] Total counts from fullrun_mos1_xmm0066950201_pi300-10000_pass1_cl_src7_bgd.pi.gz = 73.00
[Mon Jun  3 20:37:06 2013] Got source and background scale factors 136000.000000, 1654416.000000
[Mon Jun  3 20:37:06 2013] User source parameters:
  Position = (290.2, 356.4) = 11 39 15.43 17 9 51.5
  Extent = 4.8 (3.2-8.2)" x 2.5 (2.1-4.3)", rotation angle = 10 (341-40) degrees
  Source aperture counts = 24.0 +/- 6.5
  Background aperture counts = 6.0
  Rate = 0.002 +/- 0.0006

[Mon Jun  3 20:37:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 20:37:07 2013] Using photon index=1.80, rate=0.00198, arf fullrun_mos1_xmm0066950201_pi300-10000_pass1_cl_src7.arf
[Mon Jun  3 20:37:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 20:37:07 2013] Updating source flux to 4.1e-14
[Mon Jun  3 20:37:13 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun  3 20:37:14 2013] xmm0066950201/analysis//spectral/fullrun_mos1_xmm0066950201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete