[Mon May 27 00:44:27 2013] Detection parameters:
  Position = (244.4, 478.0) = 8 10 43.63 -49 1 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.9 +/- 25.3
  Background counts = 152.7
  Rate = 0.003 +/- 0.0005

[Mon May 27 00:44:34 2013] Off-axis axis estimate = 13.60'
[Mon May 27 00:46:06 2013] Using EEF radius (= 13.23 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:06 2013] Initial guess for spatial extent in simple fitting = 13.23"
[Mon May 27 00:46:06 2013] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.117
[Mon May 27 00:46:06 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 13.23"
[Mon May 27 00:46:08 2013] fullrun_pn_xmm0066940101_pi300-10000_cl_pass0_src29.ximg exists
[Mon May 27 00:46:08 2013] fullrun_pn_xmm0066940101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon May 27 00:46:08 2013] Fit fullrun_pn_xmm0066940101_pi300-10000_cl_pass0_src29 appears to have run properly
[Mon May 27 00:46:11 2013] fullrun_pn_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon May 27 00:46:11 2013] fullrun_pn_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon May 27 00:46:11 2013] Fit fullrun_pn_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon May 27 00:46:54 2013] Spatial fit model total counts = 1406.360000, observed total counts = 1403.000000
[Mon May 27 00:46:54 2013] Offset between fit and detection position for source 31 = 0.881068 pixels
[Mon May 27 00:46:54 2013] Warning, changing simple spatial fit ID from 29 to 27
[Mon May 27 00:46:54 2013] 1396.031000 total counts/ 849.899000 bgd. counts: snr = 18.733286
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.881068 pixels
  Position = (244.2, 477.2) = 8 10 43.73 -49 1 17.7
  Extent = 26.6 (26.6-53.3)", rotation angle = 0
  Source counts = 546.1 +/- 37.4
  Background counts = 849.9
  Rate = 0.02 +/- 0.001
[Mon May 27 00:46:54 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:46:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:46:54 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:46:54 2013] Source does appear to be extended
[Mon May 27 00:46:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:46:54 2013] Source is confused with source 29
[Mon May 27 00:48:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 00:48:25 2013] Initial guess for spatial extent in simple fitting = 26.64"
[Mon May 27 00:48:25 2013] source mask rpix=6.1, npix_max = 175, mask sum = 169, frac = 0.963
[Mon May 27 00:48:25 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 26.64"
[Mon May 27 00:48:26 2013] fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_src27.ximg exists
[Mon May 27 00:48:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_src27.csv
[Mon May 27 00:48:26 2013] fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon May 27 00:48:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_src27.csv
[Mon May 27 00:48:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:28 2013] fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon May 27 00:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon May 27 00:48:28 2013] fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon May 27 00:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon May 27 00:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:49:07 2013] Warning, spatial fit 27 centroid is now closest to src. 29
[Mon May 27 00:49:07 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:07 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:49:07 2013] Source does appear to be extended
[Mon May 27 00:49:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:50:25 2013] XMMSAS src. selection expression = ellipse(21193.168000, 41464.726000, 1598.196046, 1598.196046, 0.000000, X, Y)
[Mon May 27 00:50:25 2013] Not overwriting source region fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_src.reg
[Mon May 27 00:50:25 2013] Extracting stamp from image fullrun_pn_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (152, 385) - (336, 569)
[Mon May 27 00:50:25 2013] XMMSAS bgd. selection expression = annulus(21193.168000, 41464.726000, 2663.660077, 5327.320153, X, Y) && !ellipse(26606.862600, 40458.379000, 616.036818, 616.036818, 0.000000, X, Y) && !ellipse(22874.685760, 36988.614410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20813.123215, 36603.523651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17683.701248, 42829.166443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20791.997147, 41637.114044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16359.902313, 41698.020416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25558.487610, 41101.326477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24885.227936, 40905.499481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26145.962000, 40431.716000, 478.406414, 478.406414, 0.000000, X, Y) && !ellipse(17014.947159, 39088.171753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17582.622955, 37953.181244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20819.374481, 35482.769409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27392.982758, 42016.000000, 1740.000000, 1740.000000, 0.000000, X, Y)
[Mon May 27 00:50:25 2013] Writing fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31.gif
[Mon May 27 00:50:36 2013] ../../xmm0066940101/products/events/fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0066940101/products/events/fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Mon May 27 00:50:36 2013] Mean detx,y = (-9073.64, -12750.59) 
[Mon May 27 00:50:36 2013] ../../xmm0066940101/products/images/fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_src.img and ../../xmm0066940101/products/images/fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Mon May 27 00:50:36 2013] ../../xmm0066940101/products/spectra/fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Mon May 27 00:50:36 2013] Setting source spectrum file to fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May 27 00:50:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon May 27 00:50:36 2013] ../../xmm0066940101/products/lightcurves/fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Mon May 27 05:34:49 2013] Updating aperture counts using extracted products
[Mon May 27 05:34:50 2013] Total counts from fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 3259.00
[Mon May 27 05:34:50 2013] Total counts from fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 16637.00
[Mon May 27 05:34:50 2013] Got source and background scale factors 6883958.000000, 32035334.000000
[Mon May 27 05:34:50 2013] User source parameters:
  Position = (244.2, 477.2) = 8 10 43.73 -49 1 17.7
  Extent = 26.6 (26.6-53.3)", rotation angle = 0
  Source aperture counts = -316.1 +/- 58.1
  Background aperture counts = 3575.1
  Rate = -0.01 +/- 0.002

[Mon May 27 05:35:20 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:35:20 2013] Using photon index=1.80, rate=0.0184, arf fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31.arf
[Mon May 27 05:35:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:35:20 2013] Updating source flux to 2.2e-13
[Mon May 27 05:37:26 2013] Flag c found in src. 31 procflags, skipping spectral fitting
[Mon May 27 05:37:58 2013] xmm0066940101/analysis//spectral/fullrun_pn_xmm0066940101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete