[Mon May 27 00:44:52 2013] Detection parameters:
  Position = (476.8, 211.3) = 8 9 0.32 -49 20 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.7 +/- 16.1
  Background counts = 38.2
  Rate = 0.002 +/- 0.0003

[Mon May 27 00:44:53 2013] Off-axis axis estimate = 14.39'
[Mon May 27 00:46:16 2013] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:16 2013] Initial guess for spatial extent in simple fitting = 13.63"
[Mon May 27 00:46:16 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.929
[Mon May 27 00:46:16 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 13.63"
[Mon May 27 00:46:19 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src63.ximg exists
[Mon May 27 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src63.csv
[Mon May 27 00:46:19 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src63_1.ximg exists
[Mon May 27 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src63.csv
[Mon May 27 00:46:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:20 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Mon May 27 00:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Mon May 27 00:46:20 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Mon May 27 00:46:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Mon May 27 00:46:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:47:43 2013] Source 74 is offset by 7.940545 and 5.026558 pixels which is larger than
2 X fitted extent = 1.683126 x 1.683126, not incorporating fit results
[Mon May 27 00:47:43 2013] Spatial fit model total counts = 794.775000, observed total counts = 701.000000
[Mon May 27 00:47:43 2013] Poor agreement between spatial fit and data for source 74
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 00:47:43 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:43 2013] Assessing source extent using major
[Mon May 27 00:47:43 2013] Source does appear to be extended
[Mon May 27 00:47:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:48:32 2013] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:32 2013] Initial guess for spatial extent in simple fitting = 13.63"
[Mon May 27 00:48:32 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.929
[Mon May 27 00:48:32 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 13.63"
[Mon May 27 00:48:34 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src61.ximg exists
[Mon May 27 00:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src61.csv
[Mon May 27 00:48:34 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src61_1.ximg exists
[Mon May 27 00:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src61.csv
[Mon May 27 00:48:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:36 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Mon May 27 00:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Mon May 27 00:48:36 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Mon May 27 00:48:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Mon May 27 00:48:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:49:48 2013] Source 74 is offset by 4.019671 and -6.853534 pixels which is larger than
2 X fitted extent = 5.580207 x 5.580207, not incorporating fit results
[Mon May 27 00:49:48 2013] Spatial fit model total counts = 794.711000, observed total counts = 701.000000
[Mon May 27 00:49:48 2013] Poor agreement between spatial fit and data for source 74
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 00:49:48 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:48 2013] Assessing source extent using major
[Mon May 27 00:49:48 2013] Source does appear to be extended
[Mon May 27 00:49:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:32:44 2013] XMMSAS src. selection expression = ellipse(41436.035400, 18337.418579, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 03:32:44 2013] Not overwriting source region fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_src.reg
[Mon May 27 03:32:44 2013] Extracting stamp from image fullrun_mos2_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (439, 174) - (514, 249)
[Mon May 27 03:32:44 2013] XMMSAS bgd. selection expression = annulus(41436.035400, 18337.418579, 1087.500000, 2175.000000, X, Y) && !ellipse(41891.229553, 18833.198837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40094.619019, 19890.389023, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 03:32:44 2013] Writing fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74.gif
[Mon May 27 03:32:47 2013] ../../xmm0066940101/products/events/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_src.evt and ../../xmm0066940101/products/events/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_bgd.evt exist, delete to re-create
[Mon May 27 03:32:47 2013] Mean detx,y = (-15594.14, -5601.34) 
[Mon May 27 03:32:47 2013] ../../xmm0066940101/products/images/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_src.img and ../../xmm0066940101/products/images/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_bgd.img exist, delete to re-create
[Mon May 27 03:32:47 2013] ../../xmm0066940101/products/spectra/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_bgd.pi exist, delete to re-create
[Mon May 27 03:32:47 2013] Setting source spectrum file to fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Mon May 27 03:32:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Mon May 27 03:32:47 2013] ../../xmm0066940101/products/lightcurves/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_bgd.lc exist, delete to re-create
[Mon May 27 05:26:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 05:26:07 2013] rmf not generated due to insufficient counts
[Mon May 27 05:36:02 2013] Updating aperture counts using extracted products
[Mon May 27 05:36:03 2013] Total counts from fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_src_b10.pi.gz = 415.00
[Mon May 27 05:36:03 2013] Total counts from fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_bgd.pi.gz = 667.00
[Mon May 27 05:36:03 2013] Got source and background scale factors 1285438.000000, 3086670.000000
[Mon May 27 05:36:03 2013] User source parameters:
  Position = (476.8, 211.3) = 8 9 0.32 -49 20 32.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 137.2 +/- 21.4
  Background aperture counts = 277.8
  Rate = 0.003 +/- 0.0004

[Mon May 27 05:36:03 2013] Updating counts from extracted products
[Mon May 27 05:36:03 2013] Set source signif. to 137.23/16.67 = 8.23
[Mon May 27 05:36:09 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:36:09 2013] Using photon index=1.80, rate=0.00281, arf fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74.arf
[Mon May 27 05:36:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:36:09 2013] Updating source flux to 8.8e-14
[Mon May 27 05:36:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 05:37:26 2013] xmm0066940101/analysis//spectral/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src74_pl.csv not found, spectral fit skipped or did not complete