[Mon May 27 00:44:50 2013] Detection parameters:
  Position = (325.9, 347.0) = 8 10 7.55 -49 10 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.4 +/- 18.2
  Background counts = 58.9
  Rate = 0.004 +/- 0.0004

[Mon May 27 00:44:53 2013] Off-axis axis estimate = 4.04'
[Mon May 27 00:46:16 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:16 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Mon May 27 00:46:16 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.838
[Mon May 27 00:46:16 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 8.45"
[Mon May 27 00:46:17 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src36.ximg exists
[Mon May 27 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src36.csv
[Mon May 27 00:46:17 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src36_1.ximg exists
[Mon May 27 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src36.csv
[Mon May 27 00:46:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:19 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Mon May 27 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Mon May 27 00:46:19 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Mon May 27 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Mon May 27 00:46:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:47:43 2013] Spatial fit model total counts = 635.976000, observed total counts = 570.000000
[Mon May 27 00:47:43 2013] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 00:47:43 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:43 2013] Assessing source extent using major
[Mon May 27 00:47:43 2013] Source does appear to be extended
[Mon May 27 00:47:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:48:32 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:32 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Mon May 27 00:48:32 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.838
[Mon May 27 00:48:32 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 8.45"
[Mon May 27 00:48:34 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src35.ximg exists
[Mon May 27 00:48:34 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon May 27 00:48:34 2013] Fit fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src35 appears to have run properly
[Mon May 27 00:48:35 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon May 27 00:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Mon May 27 00:48:35 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon May 27 00:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Mon May 27 00:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:49:47 2013] Spatial fit model total counts = 565.310000, observed total counts = 570.000000
[Mon May 27 00:49:47 2013] Offset between fit and detection position for source 42 = 0.622626 pixels
[Mon May 27 00:49:47 2013] 568.916700 total counts/ 508.008000 bgd. counts: snr = 2.702365
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.622626 pixels
  Position = (326.5, 346.7) = 8 10 7.29 -49 10 45.2
  Extent = 5.8 (3.8-7.2)" x 1.7 (3.0-6.3)", rotation angle = 58 (117-85) degrees
  Source counts = 60.9 +/- 23.9
  Background counts = 508.0
  Rate = 0.001 +/- 0.0005
[Mon May 27 00:49:48 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:48 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:49:48 2013] Source does appear to be extended
[Mon May 27 00:49:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.60
[Mon May 27 03:32:43 2013] XMMSAS src. selection expression = ellipse(28354.327200, 30116.875000, 347.314210, 100.506003, 58.304577, X, Y)
[Mon May 27 03:32:43 2013] Not overwriting source region fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_src.reg
[Mon May 27 03:32:43 2013] Extracting stamp from image fullrun_mos2_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (307, 327) - (346, 367)
[Mon May 27 03:32:43 2013] XMMSAS bgd. selection expression = annulus(28354.327200, 30116.875000, 578.857017, 1157.714033, X, Y) && !ellipse(28173.417999, 28314.211548, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 03:32:43 2013] Writing fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42.gif
[Mon May 27 03:32:47 2013] ../../xmm0066940101/products/events/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_src.evt and ../../xmm0066940101/products/events/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_bgd.evt exist, delete to re-create
[Mon May 27 03:32:47 2013] Mean detx,y = (-261.88, 2985.87) 
[Mon May 27 03:32:47 2013] ../../xmm0066940101/products/images/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_src.img and ../../xmm0066940101/products/images/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_bgd.img exist, delete to re-create
[Mon May 27 03:32:47 2013] ../../xmm0066940101/products/spectra/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_bgd.pi exist, delete to re-create
[Mon May 27 03:32:47 2013] Setting source spectrum file to fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon May 27 03:32:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon May 27 03:32:47 2013] ../../xmm0066940101/products/lightcurves/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_bgd.lc exist, delete to re-create
[Mon May 27 05:02:24 2013] Not generating rmf since there are only 60 counts
[Mon May 27 05:02:24 2013] rmf not generated due to insufficient counts
[Mon May 27 05:35:57 2013] Updating aperture counts using extracted products
[Mon May 27 05:35:57 2013] Total counts from fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 101.00
[Mon May 27 05:35:57 2013] Total counts from fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_bgd.pi.gz = 809.00
[Mon May 27 05:35:57 2013] Got source and background scale factors 110400.000000, 2848900.000000
[Mon May 27 05:35:57 2013] User source parameters:
  Position = (326.5, 346.7) = 8 10 7.29 -49 10 45.2
  Extent = 5.8 (3.8-7.2)" x 1.7 (3.0-6.3)", rotation angle = 58 (117-85) degrees
  Source aperture counts = 69.6 +/- 11.1
  Background aperture counts = 31.4
  Rate = 0.001 +/- 0.0002

[Mon May 27 05:36:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:36:07 2013] Using photon index=1.80, rate=0.00125, arf fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42.arf
[Mon May 27 05:36:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:36:08 2013] Updating source flux to 3.5e-14
[Mon May 27 05:36:50 2013] Flag p found in src. 42 procflags, skipping spectral fitting
[Mon May 27 05:36:50 2013] Source 42 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 05:37:26 2013] xmm0066940101/analysis//spectral/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete