[Mon May 27 00:44:50 2013] Detection parameters:
  Position = (273.1, 346.8) = 8 10 30.96 -49 10 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.1 +/- 14.7
  Background counts = 55.5
  Rate = 0.002 +/- 0.0004

[Mon May 27 00:44:53 2013] Off-axis axis estimate = 3.96'
[Mon May 27 00:46:16 2013] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:16 2013] Initial guess for spatial extent in simple fitting = 8.41"
[Mon May 27 00:46:16 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Mon May 27 00:46:16 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 8.41"
[Mon May 27 00:46:19 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src68.ximg exists
[Mon May 27 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src68.csv
[Mon May 27 00:46:19 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src68_1.ximg exists
[Mon May 27 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src68.csv
[Mon May 27 00:46:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:20 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Mon May 27 00:46:20 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Mon May 27 00:46:20 2013] Fit fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Mon May 27 00:47:43 2013] Spatial fit model total counts = 586.752000, observed total counts = 586.000000
[Mon May 27 00:47:43 2013] Offset between fit and detection position for source 41 = 0.206220 pixels
[Mon May 27 00:47:43 2013] 586.980900 total counts/ 544.688000 bgd. counts: snr = 1.812148
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.206220 pixels
  Position = (273.0, 347.0) = 8 10 31.02 -49 10 44.0
  Extent = 3.9 (2.8-5.7)", rotation angle = 0
  Source counts = 42.3 +/- 24.2
  Background counts = 544.7
  Rate = 0.0009 +/- 0.0005
[Mon May 27 00:47:43 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:43 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:47:43 2013] Source does appear to be extended
[Mon May 27 00:47:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:48:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:32 2013] Initial guess for spatial extent in simple fitting = 3.86"
[Mon May 27 00:48:32 2013] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.519
[Mon May 27 00:48:32 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 3.86"
[Mon May 27 00:48:35 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src65.ximg exists
[Mon May 27 00:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src65.csv
[Mon May 27 00:48:35 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src65_1.ximg exists
[Mon May 27 00:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src65.csv
[Mon May 27 00:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:36 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Mon May 27 00:48:36 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Mon May 27 00:48:36 2013] Fit fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Mon May 27 00:49:48 2013] Spatial fit model total counts = 585.239000, observed total counts = 586.000000
[Mon May 27 00:49:48 2013] Offset between fit and detection position for source 41 = 0.022491 pixels
[Mon May 27 00:49:48 2013] 585.911200 total counts/ 542.381000 bgd. counts: snr = 1.869125
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.022491 pixels
  Position = (273.0, 347.0) = 8 10 31.01 -49 10 44.1
  Extent = 4.0 (2.8-5.7)", rotation angle = 0
  Source counts = 43.5 +/- 24.2
  Background counts = 542.4
  Rate = 0.0009 +/- 0.0005
[Mon May 27 00:49:48 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:48 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:49:48 2013] Source does appear to be extended
[Mon May 27 00:49:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:32:44 2013] XMMSAS src. selection expression = ellipse(23704.294400, 30139.431400, 239.506807, 239.506807, 0.000000, X, Y)
[Mon May 27 03:32:44 2013] Not overwriting source region fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src41_src.reg
[Mon May 27 03:32:44 2013] Extracting stamp from image fullrun_mos2_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (259, 333) - (287, 361)
[Mon May 27 03:32:44 2013] XMMSAS bgd. selection expression = annulus(23704.294400, 30139.431400, 399.178011, 798.356023, X, Y) && !ellipse(24400.467349, 31205.182267, 362.143251, 290.923513, 358.403848, X, Y) && !ellipse(25234.478455, 28553.679260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22769.219400, 30461.044200, 266.427208, 266.427208, 0.000000, X, Y) && !ellipse(25699.306000, 31679.902000, 1397.280040, 1397.280040, 0.000000, X, Y)
[Mon May 27 03:32:44 2013] Writing fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src41.gif
[Mon May 27 03:34:07 2013] Mean detx,y = (4258.95, 2010.25) 
[Mon May 27 03:34:09 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 03:34:25 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 03:34:25 2013] Setting source spectrum file to fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon May 27 03:34:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Mon May 27 05:26:44 2013] Not generating rmf since there are only 43 counts
[Mon May 27 05:26:44 2013] rmf not generated due to insufficient counts
[Mon May 27 05:36:03 2013] Updating aperture counts using extracted products
[Mon May 27 05:36:03 2013] Total counts from fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 93.00
[Mon May 27 05:36:03 2013] Total counts from fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src41_bgd.pi.gz = 409.00
[Mon May 27 05:36:03 2013] Got source and background scale factors 179200.000000, 1483200.000000
[Mon May 27 05:36:04 2013] User source parameters:
  Position = (273.0, 347.0) = 8 10 31.01 -49 10 44.1
  Extent = 4.0 (2.8-5.7)", rotation angle = 0
  Source aperture counts = 43.6 +/- 10.7
  Background aperture counts = 49.4
  Rate = 0.0009 +/- 0.0002

[Mon May 27 05:36:09 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:36:09 2013] Using photon index=1.80, rate=0.000892, arf fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src41.arf
[Mon May 27 05:36:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:36:09 2013] Updating source flux to 1.9e-14
[Mon May 27 05:36:50 2013] Source 41 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 05:37:26 2013] xmm0066940101/analysis//spectral/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete