[Mon May 27 00:44:48 2013] Detection parameters:
  Position = (282.6, 400.8) = 8 10 26.76 -49 6 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.6 +/- 16.4
  Background counts = 52.2
  Rate = 0.005 +/- 0.0006

[Mon May 27 00:44:53 2013] Off-axis axis estimate = 7.51'
[Mon May 27 00:46:16 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:16 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Mon May 27 00:46:16 2013] source mask rpix=2.3, npix_max = 32, mask sum = 22, frac = 0.682
[Mon May 27 00:46:16 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 10.18"
[Mon May 27 00:46:17 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src32.ximg exists
[Mon May 27 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src32.csv
[Mon May 27 00:46:17 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon May 27 00:46:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src32.csv
[Mon May 27 00:46:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:19 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon May 27 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon May 27 00:46:19 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon May 27 00:46:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon May 27 00:46:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:47:42 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.006956 pixels away
[Mon May 27 00:47:43 2013] Spatial fit model total counts = 592.926000, observed total counts = 492.000000
[Mon May 27 00:47:43 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 00:47:43 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:43 2013] Assessing source extent using major
[Mon May 27 00:47:43 2013] Source does appear to be extended
[Mon May 27 00:47:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:48:32 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:32 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Mon May 27 00:48:32 2013] source mask rpix=2.3, npix_max = 32, mask sum = 22, frac = 0.682
[Mon May 27 00:48:32 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 10.18"
[Mon May 27 00:48:34 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src31.ximg exists
[Mon May 27 00:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src31.csv
[Mon May 27 00:48:34 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon May 27 00:48:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src31.csv
[Mon May 27 00:48:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:35 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon May 27 00:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Mon May 27 00:48:35 2013] fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon May 27 00:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Mon May 27 00:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:49:47 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 14.529437 pixels away
[Mon May 27 00:49:48 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:48 2013] Assessing source extent using major
[Mon May 27 00:49:48 2013] Source does appear to be extended
[Mon May 27 00:49:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:32:43 2013] XMMSAS src. selection expression = ellipse(24533.869324, 34818.098755, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 03:32:43 2013] Not overwriting source region fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_src.reg
[Mon May 27 03:32:43 2013] Extracting stamp from image fullrun_mos2_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (245, 363) - (320, 438)
[Mon May 27 03:32:43 2013] XMMSAS bgd. selection expression = annulus(24533.869324, 34818.098755, 1087.500000, 2175.000000, X, Y) && !ellipse(24698.057000, 33169.098600, 438.109613, 326.238409, 356.638610, X, Y) && !ellipse(22953.914000, 32636.396000, 319.704009, 319.704009, 0.000000, X, Y) && !ellipse(26746.354958, 36045.722174, 541.937758, 290.093786, 358.442664, X, Y) && !ellipse(24454.686600, 32442.977200, 331.378410, 331.378410, 0.000000, X, Y) && !ellipse(23000.709739, 37049.273615, 769.388323, 318.878247, 348.119347, X, Y) && !ellipse(23603.658569, 35231.768250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22755.116516, 32250.252655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25699.306000, 31679.902000, 1397.280040, 1397.280040, 0.000000, X, Y) && !ellipse(21671.269836, 33541.666870, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 03:32:43 2013] Writing fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23.gif
[Mon May 27 03:32:46 2013] ../../xmm0066940101/products/events/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0066940101/products/events/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Mon May 27 03:32:46 2013] Mean detx,y = (4428.85, 6784.50) 
[Mon May 27 03:32:46 2013] ../../xmm0066940101/products/images/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_src.img and ../../xmm0066940101/products/images/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Mon May 27 03:32:46 2013] ../../xmm0066940101/products/spectra/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Mon May 27 03:32:46 2013] Setting source spectrum file to fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon May 27 03:32:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon May 27 03:32:46 2013] ../../xmm0066940101/products/lightcurves/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Mon May 27 04:57:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 04:57:02 2013] rmf not generated due to insufficient counts
[Mon May 27 05:35:56 2013] Updating aperture counts using extracted products
[Mon May 27 05:35:56 2013] Total counts from fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 375.00
[Mon May 27 05:35:56 2013] Total counts from fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 2201.00
[Mon May 27 05:35:56 2013] Got source and background scale factors 1074016.000000, 8527914.000000
[Mon May 27 05:35:56 2013] User source parameters:
  Position = (282.6, 400.8) = 8 10 26.76 -49 6 53.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 97.8 +/- 20.4
  Background aperture counts = 277.2
  Rate = 0.002 +/- 0.0004

[Mon May 27 05:35:56 2013] Updating counts from extracted products
[Mon May 27 05:35:56 2013] Set source signif. to 97.80/16.65 = 5.87
[Mon May 27 05:36:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:36:07 2013] Using photon index=1.80, rate=0.002, arf fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23.arf
[Mon May 27 05:36:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:36:07 2013] Updating source flux to 4.7e-14
[Mon May 27 05:36:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 05:37:26 2013] xmm0066940101/analysis//spectral/fullrun_mos2_xmm0066940101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete