[Mon May 27 00:44:36 2013] Detection parameters:
  Position = (306.9, 465.9) = 8 10 16.00 -49 2 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.4 +/- 20.0
  Background counts = 46.7
  Rate = 0.004 +/- 0.0004

[Mon May 27 00:44:43 2013] Off-axis axis estimate = 12.16'
[Mon May 27 00:46:12 2013] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:12 2013] Initial guess for spatial extent in simple fitting = 12.51"
[Mon May 27 00:46:12 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.922
[Mon May 27 00:46:12 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 12.51"
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src42.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src42.csv
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src42_1.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src42.csv
[Mon May 27 00:46:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Mon May 27 00:46:15 2013] Fit fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Mon May 27 00:47:17 2013] Warning, spatial fit 42 centroid is now closest to src. 60
[Mon May 27 00:47:17 2013] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.395933 pixels away
[Mon May 27 00:47:18 2013] Source 8 is offset by -0.995068 and -7.938641 pixels which is larger than
2 X fitted extent = 1.420805 x 1.420805, not incorporating fit results
[Mon May 27 00:47:18 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:18 2013] Assessing source extent using major
[Mon May 27 00:47:18 2013] Source does appear to be extended
[Mon May 27 00:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:47:19 2013] Source is confused with source 6
[Mon May 27 00:48:29 2013] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:29 2013] Initial guess for spatial extent in simple fitting = 12.51"
[Mon May 27 00:48:29 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.922
[Mon May 27 00:48:29 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 12.51"
[Mon May 27 00:48:30 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src41.ximg exists
[Mon May 27 00:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src41.csv
[Mon May 27 00:48:30 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src41_1.ximg exists
[Mon May 27 00:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src41.csv
[Mon May 27 00:48:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Mon May 27 00:48:32 2013] Fit fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Mon May 27 00:49:28 2013] Warning, spatial fit 41 centroid is now closest to src. 60
[Mon May 27 00:49:28 2013] Source 8 is offset by -0.995068 and -7.938641 pixels which is larger than
2 X fitted extent = 1.420805 x 1.420805, not incorporating fit results
[Mon May 27 00:49:28 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:28 2013] Assessing source extent using major
[Mon May 27 00:49:28 2013] Source does appear to be extended
[Mon May 27 00:49:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:32:19 2013] XMMSAS src. selection expression = ellipse(26649.309052, 40487.218201, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 03:32:19 2013] Not overwriting source region fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_src.reg
[Mon May 27 03:32:19 2013] Extracting stamp from image fullrun_mos1_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (269, 428) - (344, 503)
[Mon May 27 03:32:19 2013] XMMSAS bgd. selection expression = annulus(26649.309052, 40487.218201, 1087.500000, 2175.000000, X, Y) && !ellipse(27928.374725, 41882.048462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29017.045593, 41696.414124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26171.371918, 40427.525177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24827.292000, 40865.280800, 391.690411, 391.690411, 0.000000, X, Y) && !ellipse(25754.465942, 40152.424316, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 03:32:19 2013] Writing fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8.gif
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Mon May 27 03:32:22 2013] Mean detx,y = (12938.68, -3779.64) 
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_src.img and ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Mon May 27 03:32:22 2013] Setting source spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May 27 03:32:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Mon May 27 03:32:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 03:32:42 2013] rmf not generated due to insufficient counts
[Mon May 27 03:32:42 2013] fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Mon May 27 05:35:35 2013] Updating aperture counts using extracted products
[Mon May 27 05:35:36 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 597.00
[Mon May 27 05:35:36 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1758.00
[Mon May 27 05:35:36 2013] Got source and background scale factors 1275124.000000, 7506296.000000
[Mon May 27 05:35:36 2013] User source parameters:
  Position = (306.9, 465.9) = 8 10 16.00 -49 2 5.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 298.4 +/- 25.4
  Background aperture counts = 298.6
  Rate = 0.006 +/- 0.0005

[Mon May 27 05:35:36 2013] Updating counts from extracted products
[Mon May 27 05:35:36 2013] Set source signif. to 298.36/17.28 = 17.27
[Mon May 27 05:35:46 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:35:46 2013] Using photon index=1.80, rate=0.00608, arf fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8.arf
[Mon May 27 05:35:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:35:46 2013] Updating source flux to 1.6e-13
[Mon May 27 05:36:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 05:36:50 2013] xmm0066940101/analysis//spectral/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete