[Mon May 27 00:44:42 2013] Detection parameters:
  Position = (326.8, 315.8) = 8 10 7.15 -49 13 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.8 +/- 17.1
  Background counts = 59.4
  Rate = 0.002 +/- 0.0003

[Mon May 27 00:44:43 2013] Off-axis axis estimate = 2.41'
[Mon May 27 00:46:12 2013] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:12 2013] Initial guess for spatial extent in simple fitting = 7.63"
[Mon May 27 00:46:12 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.787
[Mon May 27 00:46:12 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 7.63"
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src55.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src55.csv
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src55.csv
[Mon May 27 00:46:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon May 27 00:46:15 2013] Fit fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Mon May 27 00:47:17 2013] Spatial fit model total counts = 732.419000, observed total counts = 735.000000
[Mon May 27 00:47:17 2013] Offset between fit and detection position for source 72 = 0.210098 pixels
[Mon May 27 00:47:17 2013] 733.771600 total counts/ 669.312000 bgd. counts: snr = 2.491571
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.210098 pixels
  Position = (326.6, 315.7) = 8 10 7.23 -49 13 0.3
  Extent = 3.8 (2.8-4.7)", rotation angle = 0
  Source counts = 64.5 +/- 27.1
  Background counts = 669.3
  Rate = 0.001 +/- 0.0006
[Mon May 27 00:47:18 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:18 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:47:18 2013] Source does appear to be extended
[Mon May 27 00:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:48:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:29 2013] Initial guess for spatial extent in simple fitting = 3.81"
[Mon May 27 00:48:29 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.188
[Mon May 27 00:48:29 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 3.81"
[Mon May 27 00:48:30 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src54.ximg exists
[Mon May 27 00:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src54.csv
[Mon May 27 00:48:30 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon May 27 00:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src54.csv
[Mon May 27 00:48:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon May 27 00:48:32 2013] Fit fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Mon May 27 00:49:28 2013] Spatial fit model total counts = 744.617000, observed total counts = 747.000000
[Mon May 27 00:49:28 2013] Offset between fit and detection position for source 72 = 0.009592 pixels
[Mon May 27 00:49:28 2013] 742.057700 total counts/ 677.672000 bgd. counts: snr = 2.473316
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.009592 pixels
  Position = (326.6, 315.7) = 8 10 7.23 -49 13 0.3
  Extent = 3.8 (2.8-4.7)", rotation angle = 0
  Source counts = 64.4 +/- 27.2
  Background counts = 677.7
  Rate = 0.001 +/- 0.0006
[Mon May 27 00:49:28 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:28 2013] Assessing source extent using major axis lower bound
[Mon May 27 00:49:28 2013] Source does appear to be extended
[Mon May 27 00:49:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:32:20 2013] XMMSAS src. selection expression = ellipse(28365.950000, 27415.413200, 226.678807, 226.678807, 0.000000, X, Y)
[Mon May 27 03:32:20 2013] Not overwriting source region fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_src.reg
[Mon May 27 03:32:20 2013] Extracting stamp from image fullrun_mos1_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (314, 303) - (340, 329)
[Mon May 27 03:32:20 2013] XMMSAS bgd. selection expression = annulus(28365.950000, 27415.413200, 377.798011, 755.596022, X, Y) && !ellipse(27358.667360, 27311.727400, 358.305610, 358.305610, 0.000000, X, Y) && !ellipse(28167.676800, 28296.707600, 381.053611, 381.053611, 0.000000, X, Y)
[Mon May 27 03:32:20 2013] Writing fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72.gif
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_src.evt and ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_bgd.evt exist, delete to re-create
[Mon May 27 03:32:22 2013] Mean detx,y = (568.04, 697.64) 
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_src.img and ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_bgd.img exist, delete to re-create
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_bgd.pi exist, delete to re-create
[Mon May 27 03:32:22 2013] Setting source spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Mon May 27 03:32:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_bgd.lc exist, delete to re-create
[Mon May 27 03:32:42 2013] Not generating rmf since there are only 64 counts
[Mon May 27 03:32:42 2013] rmf not generated due to insufficient counts
[Mon May 27 03:32:42 2013] fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72.arf exists, delete to re-create
[Mon May 27 05:35:38 2013] Updating aperture counts using extracted products
[Mon May 27 05:35:38 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_src_b10.pi.gz = 114.00
[Mon May 27 05:35:38 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_bgd.pi.gz = 404.00
[Mon May 27 05:35:39 2013] Got source and background scale factors 160000.000000, 1213096.000000
[Mon May 27 05:35:39 2013] User source parameters:
  Position = (326.6, 315.7) = 8 10 7.23 -49 13 0.3
  Extent = 3.8 (2.8-4.7)", rotation angle = 0
  Source aperture counts = 60.7 +/- 11.7
  Background aperture counts = 53.3
  Rate = 0.001 +/- 0.0002

[Mon May 27 05:35:47 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:35:47 2013] Using photon index=1.80, rate=0.00131, arf fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72.arf
[Mon May 27 05:35:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:35:47 2013] Updating source flux to 2.1e-14
[Mon May 27 05:36:17 2013] Source 72 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 05:36:50 2013] xmm0066940101/analysis//spectral/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete