[Mon May 27 00:44:42 2013] Detection parameters:
  Position = (419.4, 330.2) = 8 9 26.06 -49 11 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.9 +/- 13.8
  Background counts = 48.8
  Rate = 0.002 +/- 0.0004

[Mon May 27 00:44:43 2013] Off-axis axis estimate = 9.07'
[Mon May 27 00:46:12 2013] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:12 2013] Initial guess for spatial extent in simple fitting = 10.96"
[Mon May 27 00:46:12 2013] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.959
[Mon May 27 00:46:12 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 10.96"
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src62.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src62.csv
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src62_1.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src62.csv
[Mon May 27 00:46:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Mon May 27 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Mon May 27 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Mon May 27 00:46:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:47:18 2013] Source 70 is offset by -9.430860 and 1.129108 pixels which is larger than
2 X fitted extent = 1.260087 x 1.260087, not incorporating fit results
[Mon May 27 00:47:19 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:19 2013] Assessing source extent using major
[Mon May 27 00:47:19 2013] Source does appear to be extended
[Mon May 27 00:47:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:48:29 2013] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:29 2013] Initial guess for spatial extent in simple fitting = 10.96"
[Mon May 27 00:48:29 2013] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.959
[Mon May 27 00:48:29 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 10.96"
[Mon May 27 00:48:31 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src60.ximg exists
[Mon May 27 00:48:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src60.csv
[Mon May 27 00:48:31 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src60_1.ximg exists
[Mon May 27 00:48:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src60.csv
[Mon May 27 00:48:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Mon May 27 00:48:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src60.csv
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Mon May 27 00:48:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src60.csv
[Mon May 27 00:48:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:49:28 2013] Source 70 is offset by -7.550630 and -1.697908 pixels which is larger than
2 X fitted extent = 1.240428 x 1.240428, not incorporating fit results
[Mon May 27 00:49:28 2013] Warning, spatial fit 60 centroid is now closest to src. 71
[Mon May 27 00:49:28 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:28 2013] Assessing source extent using major
[Mon May 27 00:49:28 2013] Source does appear to be extended
[Mon May 27 00:49:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:32:20 2013] XMMSAS src. selection expression = ellipse(36436.931183, 28681.118011, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 03:32:20 2013] Not overwriting source region fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_src.reg
[Mon May 27 03:32:20 2013] Extracting stamp from image fullrun_mos1_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (382, 293) - (457, 368)
[Mon May 27 03:32:20 2013] XMMSAS bgd. selection expression = annulus(36436.931183, 28681.118011, 1087.500000, 2175.000000, X, Y) && !ellipse(37710.015636, 30540.061386, 437.199964, 286.319808, 248.857475, X, Y) && !ellipse(34390.070862, 27411.318390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36195.835938, 27907.429199, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 03:32:20 2013] Writing fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70.gif
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_src.evt and ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_bgd.evt exist, delete to re-create
[Mon May 27 03:32:22 2013] Mean detx,y = (3512.21, 8366.12) 
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_src.img and ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_bgd.img exist, delete to re-create
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_bgd.pi exist, delete to re-create
[Mon May 27 03:32:22 2013] Setting source spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Mon May 27 03:32:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_bgd.lc exist, delete to re-create
[Mon May 27 03:32:42 2013] Not generating rmf since there are only 73 counts
[Mon May 27 03:32:42 2013] rmf not generated due to insufficient counts
[Mon May 27 03:32:42 2013] fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70.arf exists, delete to re-create
[Mon May 27 05:35:39 2013] Updating aperture counts using extracted products
[Mon May 27 05:35:40 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 400.00
[Mon May 27 05:35:40 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_bgd.pi.gz = 2227.00
[Mon May 27 05:35:40 2013] Got source and background scale factors 1263212.000000, 8507195.000000
[Mon May 27 05:35:40 2013] User source parameters:
  Position = (419.4, 330.2) = 8 9 26.06 -49 11 55.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 69.3 +/- 21.0
  Background aperture counts = 330.7
  Rate = 0.001 +/- 0.0004

[Mon May 27 05:35:40 2013] Updating counts from extracted products
[Mon May 27 05:35:40 2013] Set source signif. to 69.32/18.18 = 3.81
[Mon May 27 05:35:47 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:35:47 2013] Using photon index=1.80, rate=0.00141, arf fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70.arf
[Mon May 27 05:35:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:35:47 2013] Updating source flux to 2.4e-14
[Mon May 27 05:36:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 05:36:50 2013] xmm0066940101/analysis//spectral/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete