[Mon May 27 00:44:40 2013] Detection parameters:
  Position = (476.7, 211.1) = 8 9 0.38 -49 20 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.9 +/- 15.8
  Background counts = 34.7
  Rate = 0.002 +/- 0.0003

[Mon May 27 00:44:43 2013] Off-axis axis estimate = 14.39'
[Mon May 27 00:46:12 2013] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:12 2013] Initial guess for spatial extent in simple fitting = 13.62"
[Mon May 27 00:46:12 2013] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.985
[Mon May 27 00:46:12 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 13.62"
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src65.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src65.csv
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src65_1.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src65.csv
[Mon May 27 00:46:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Mon May 27 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Mon May 27 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Mon May 27 00:46:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:47:18 2013] Warning, spatial fit 65 centroid is now closest to src. 54
[Mon May 27 00:47:19 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:19 2013] Assessing source extent using major
[Mon May 27 00:47:19 2013] Source does appear to be extended
[Mon May 27 00:47:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:48:29 2013] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:29 2013] Initial guess for spatial extent in simple fitting = 13.62"
[Mon May 27 00:48:29 2013] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.985
[Mon May 27 00:48:29 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 13.62"
[Mon May 27 00:48:31 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src63.ximg exists
[Mon May 27 00:48:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src63.csv
[Mon May 27 00:48:31 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src63_1.ximg exists
[Mon May 27 00:48:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src63.csv
[Mon May 27 00:48:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Mon May 27 00:48:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Mon May 27 00:48:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Mon May 27 00:48:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:49:28 2013] Source 55 is offset by 7.816969 and 6.227965 pixels which is larger than
2 X fitted extent = 1.576225 x 1.576225, not incorporating fit results
[Mon May 27 00:49:28 2013] Warning, spatial fit 63 centroid is now closest to src. 54
[Mon May 27 00:49:28 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:28 2013] Assessing source extent using major
[Mon May 27 00:49:28 2013] Source does appear to be extended
[Mon May 27 00:49:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:32:20 2013] XMMSAS src. selection expression = ellipse(41425.022339, 18318.778946, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 03:32:20 2013] Not overwriting source region fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_src.reg
[Mon May 27 03:32:20 2013] Extracting stamp from image fullrun_mos1_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (439, 174) - (514, 249)
[Mon May 27 03:32:20 2013] XMMSAS bgd. selection expression = annulus(41425.022339, 18318.778946, 1087.500000, 2175.000000, X, Y) && !ellipse(41893.749176, 18819.534729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39701.494141, 15797.774200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39995.531000, 19912.072800, 749.936822, 454.061613, 328.273800, X, Y)
[Mon May 27 03:32:20 2013] Writing fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55.gif
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_src.evt and ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_bgd.evt exist, delete to re-create
[Mon May 27 03:32:23 2013] Mean detx,y = (-5458.26, 15406.57) 
[Mon May 27 03:32:23 2013] ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_src.img and ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_bgd.img exist, delete to re-create
[Mon May 27 03:32:23 2013] ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_bgd.pi exist, delete to re-create
[Mon May 27 03:32:23 2013] Setting source spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon May 27 03:32:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Mon May 27 03:32:23 2013] ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_bgd.lc exist, delete to re-create
[Mon May 27 03:32:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 03:32:42 2013] rmf not generated due to insufficient counts
[Mon May 27 03:32:42 2013] fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55.arf exists, delete to re-create
[Mon May 27 05:35:40 2013] Updating aperture counts using extracted products
[Mon May 27 05:35:40 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 384.00
[Mon May 27 05:35:40 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_bgd.pi.gz = 977.00
[Mon May 27 05:35:40 2013] Got source and background scale factors 991450.000000, 4304986.000000
[Mon May 27 05:35:40 2013] User source parameters:
  Position = (476.7, 211.1) = 8 9 0.38 -49 20 34.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 159.0 +/- 20.6
  Background aperture counts = 225.0
  Rate = 0.003 +/- 0.0004

[Mon May 27 05:35:40 2013] Updating counts from extracted products
[Mon May 27 05:35:40 2013] Set source signif. to 158.99/15.00 = 10.60
[Mon May 27 05:35:47 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:35:47 2013] Using photon index=1.80, rate=0.00324, arf fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55.arf
[Mon May 27 05:35:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:35:47 2013] Updating source flux to 9.9e-14
[Mon May 27 05:36:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 05:36:50 2013] xmm0066940101/analysis//spectral/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete