[Mon May 27 00:44:37 2013] Detection parameters:
  Position = (272.2, 405.7) = 8 10 31.37 -49 6 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.2 +/- 16.8
  Background counts = 54.7
  Rate = 0.004 +/- 0.0006

[Mon May 27 00:44:43 2013] Off-axis axis estimate = 8.00'
[Mon May 27 00:46:12 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:12 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Mon May 27 00:46:12 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Mon May 27 00:46:12 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 10.43"
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src41.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src41.csv
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src41_1.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src41.csv
[Mon May 27 00:46:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Mon May 27 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Mon May 27 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Mon May 27 00:46:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:47:17 2013] Source 19 is offset by 0.130511 and -9.323626 pixels which is larger than
2 X fitted extent = 1.198906 x 1.198906, not incorporating fit results
[Mon May 27 00:47:18 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:18 2013] Assessing source extent using major
[Mon May 27 00:47:18 2013] Source does appear to be extended
[Mon May 27 00:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:48:29 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:29 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Mon May 27 00:48:29 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Mon May 27 00:48:29 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 10.43"
[Mon May 27 00:48:30 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src40.ximg exists
[Mon May 27 00:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src40.csv
[Mon May 27 00:48:30 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src40_1.ximg exists
[Mon May 27 00:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src40.csv
[Mon May 27 00:48:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Mon May 27 00:48:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Mon May 27 00:48:32 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Mon May 27 00:48:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Mon May 27 00:48:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:49:28 2013] Spatial fit model total counts = 598.305000, observed total counts = 541.000000
[Mon May 27 00:49:28 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 00:49:28 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:28 2013] Assessing source extent using major
[Mon May 27 00:49:28 2013] Source does appear to be extended
[Mon May 27 00:49:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:32:19 2013] XMMSAS src. selection expression = ellipse(23628.833557, 35243.872528, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 03:32:19 2013] Not overwriting source region fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_src.reg
[Mon May 27 03:32:19 2013] Extracting stamp from image fullrun_mos1_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (235, 368) - (310, 443)
[Mon May 27 03:32:19 2013] XMMSAS bgd. selection expression = annulus(23628.833557, 35243.872528, 1087.500000, 2175.000000, X, Y) && !ellipse(24716.268650, 33177.623131, 416.924625, 322.043169, 346.830945, X, Y) && !ellipse(20826.359863, 36640.319702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22985.765600, 37029.385200, 445.385613, 362.432010, 341.687707, X, Y) && !ellipse(24524.478485, 34781.621307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22763.232941, 32280.997894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.258600, 35182.300600, 318.083209, 318.083209, 0.000000, X, Y)
[Mon May 27 03:32:19 2013] Writing fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19.gif
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Mon May 27 03:32:22 2013] Mean detx,y = (7247.82, -5552.46) 
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_src.img and ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Mon May 27 03:32:22 2013] Setting source spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon May 27 03:32:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Mon May 27 03:32:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 03:32:42 2013] rmf not generated due to insufficient counts
[Mon May 27 03:32:42 2013] fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Mon May 27 05:35:35 2013] Updating aperture counts using extracted products
[Mon May 27 05:35:35 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 414.00
[Mon May 27 05:35:35 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 2096.00
[Mon May 27 05:35:35 2013] Got source and background scale factors 1292872.000000, 8159667.000000
[Mon May 27 05:35:35 2013] User source parameters:
  Position = (272.2, 405.7) = 8 10 31.37 -49 6 28.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 81.9 +/- 21.4
  Background aperture counts = 332.1
  Rate = 0.002 +/- 0.0004

[Mon May 27 05:35:35 2013] Updating counts from extracted products
[Mon May 27 05:35:35 2013] Set source signif. to 81.90/18.22 = 4.49
[Mon May 27 05:35:46 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:35:46 2013] Using photon index=1.80, rate=0.00167, arf fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19.arf
[Mon May 27 05:35:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:35:46 2013] Updating source flux to 3.3e-14
[Mon May 27 05:36:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 05:36:50 2013] xmm0066940101/analysis//spectral/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete