[Mon May 27 00:44:36 2013] Detection parameters:
  Position = (434.8, 433.9) = 8 9 19.35 -49 4 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 249.0 +/- 21.7
  Background counts = 45.6
  Rate = 0.005 +/- 0.0004

[Mon May 27 00:44:43 2013] Off-axis axis estimate = 13.94'
[Mon May 27 00:46:12 2013] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:46:12 2013] Initial guess for spatial extent in simple fitting = 13.40"
[Mon May 27 00:46:12 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.956
[Mon May 27 00:46:12 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 13.40"
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src32.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src32.csv
[Mon May 27 00:46:14 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon May 27 00:46:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src32.csv
[Mon May 27 00:46:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon May 27 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon May 27 00:46:15 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon May 27 00:46:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon May 27 00:46:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:47:17 2013] Spatial fit model total counts = 757.849000, observed total counts = 674.000000
[Mon May 27 00:47:17 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 00:47:18 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:47:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:47:18 2013] Assessing source extent using major
[Mon May 27 00:47:18 2013] Source does appear to be extended
[Mon May 27 00:47:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 00:48:29 2013] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Mon May 27 00:48:29 2013] Initial guess for spatial extent in simple fitting = 13.40"
[Mon May 27 00:48:29 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.956
[Mon May 27 00:48:29 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 13.40"
[Mon May 27 00:48:30 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src31.ximg exists
[Mon May 27 00:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src31.csv
[Mon May 27 00:48:30 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon May 27 00:48:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src31.csv
[Mon May 27 00:48:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:48:31 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon May 27 00:48:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Mon May 27 00:48:31 2013] fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon May 27 00:48:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Mon May 27 00:48:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0066940101_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 00:49:28 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 16.770755 pixels away
[Mon May 27 00:49:28 2013] Vigneting correction estimate = 1.000000
[Mon May 27 00:49:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 00:49:28 2013] Assessing source extent using major
[Mon May 27 00:49:28 2013] Source does appear to be extended
[Mon May 27 00:49:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:32:19 2013] XMMSAS src. selection expression = ellipse(37781.422089, 37701.181793, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 03:32:19 2013] Not overwriting source region fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_src.reg
[Mon May 27 03:32:19 2013] Extracting stamp from image fullrun_mos1_xmm0066940101_pi300-10000_cl_sm2.00.img.gz, (397, 396) - (472, 471)
[Mon May 27 03:32:19 2013] XMMSAS bgd. selection expression = annulus(37781.422089, 37701.181793, 1087.500000, 2175.000000, X, Y) && !ellipse(37405.374359, 36034.999573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35795.138916, 35574.994507, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 03:32:19 2013] Writing fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12.gif
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0066940101/products/events/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Mon May 27 03:32:22 2013] Mean detx,y = (12579.72, 7746.47) 
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_src.img and ../../xmm0066940101/products/images/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0066940101/products/spectra/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Mon May 27 03:32:22 2013] Setting source spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon May 27 03:32:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon May 27 03:32:22 2013] ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0066940101/products/lightcurves/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Mon May 27 03:32:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 03:32:42 2013] rmf not generated due to insufficient counts
[Mon May 27 03:32:42 2013] fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Mon May 27 05:35:33 2013] Updating aperture counts using extracted products
[Mon May 27 05:35:33 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 466.00
[Mon May 27 05:35:33 2013] Total counts from fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 977.00
[Mon May 27 05:35:33 2013] Got source and background scale factors 1289012.000000, 4634173.000000
[Mon May 27 05:35:33 2013] User source parameters:
  Position = (434.8, 433.9) = 8 9 19.35 -49 4 23.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 194.2 +/- 22.6
  Background aperture counts = 271.8
  Rate = 0.004 +/- 0.0005

[Mon May 27 05:35:33 2013] Updating counts from extracted products
[Mon May 27 05:35:33 2013] Set source signif. to 194.24/16.49 = 11.78
[Mon May 27 05:35:45 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 05:35:45 2013] Using photon index=1.80, rate=0.00396, arf fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12.arf
[Mon May 27 05:35:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 05:35:45 2013] Updating source flux to 1e-13
[Mon May 27 05:36:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 05:36:50 2013] xmm0066940101/analysis//spectral/fullrun_mos1_xmm0066940101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete