[Wed Jul 18 10:17:44 2012] Detection parameters:
  Position = (306.3, 320.2) = 9 23 38.93 -21 35 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49494.9 +/- 262.7
  Background counts = 104.4
  Rate = 3 +/- 0.02

[Wed Jul 18 10:17:45 2012] Off-axis axis estimate = 1.68'
[Wed Jul 18 10:20:49 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 10:20:49 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jul 18 10:20:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.061
[Wed Jul 18 10:20:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Jul 18 11:50:03 2012] fullrun_pn_xmm0065940501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 18 11:50:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0065940501_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 11:50:03 2012] fullrun_pn_xmm0065940501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 18 11:50:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0065940501_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 11:50:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065940501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065940501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 11:50:03 2012] fullrun_pn_xmm0065940501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 18 11:50:03 2012] fullrun_pn_xmm0065940501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 18 11:50:03 2012] Fit fullrun_pn_xmm0065940501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 18 12:29:57 2012] Spatial fit model total counts = 30174.000000, observed total counts = 29968.000000
[Wed Jul 18 12:29:57 2012] Offset between fit and detection position for source 1 = 0.194951 pixels
[Wed Jul 18 12:29:57 2012] 30273.410000 total counts/ 6031.010000 bgd. counts: snr = 312.162398
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.194951 pixels
  Position = (306.2, 320.4) = 9 23 38.97 -21 35 47.1
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 24242.4 +/- 174.0
  Background counts = 6031.0
  Rate = 3 +/- 0.02
[Wed Jul 18 12:29:57 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 12:29:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 12:29:57 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 12:29:57 2012] Source does appear to be extended
[Wed Jul 18 12:29:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 12:30:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 12:30:08 2012] Initial guess for spatial extent in simple fitting = 5.86"
[Wed Jul 18 12:30:08 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.879
[Wed Jul 18 12:30:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.86"
[Wed Jul 18 13:43:57 2012] fullrun_pn_xmm0065940501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 18 13:43:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065940501_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 13:43:57 2012] fullrun_pn_xmm0065940501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 18 13:43:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065940501_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 13:43:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0065940501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0065940501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 13:43:57 2012] fullrun_pn_xmm0065940501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 18 13:43:57 2012] fullrun_pn_xmm0065940501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 18 13:43:57 2012] Fit fullrun_pn_xmm0065940501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 18 14:17:41 2012] Spatial fit model total counts = 30136.800000, observed total counts = 29968.000000
[Wed Jul 18 14:17:41 2012] Offset between fit and detection position for source 1 = 0.000511 pixels
[Wed Jul 18 14:17:41 2012] 30235.590000 total counts/ 6022.590000 bgd. counts: snr = 312.001694
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000511 pixels
  Position = (306.2, 320.4) = 9 23 38.97 -21 35 47.1
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 24213.0 +/- 173.9
  Background counts = 6022.6
  Rate = 2 +/- 0.02
[Wed Jul 18 14:17:41 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 14:17:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 14:17:41 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 14:17:41 2012] Source does appear to be extended
[Wed Jul 18 14:17:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 14:17:58 2012] Counts = 24213.000000, rescaling region sizes by 3.000000
[Wed Jul 18 14:17:58 2012] XMMSAS src. selection expression = ellipse(26593.091760, 27822.175400, 1054.663230, 1054.663230, 0.000000, X, Y)
[Wed Jul 18 14:17:58 2012] Writing source region out to fullrun_pn_xmm0065940501_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 18 14:17:58 2012] Extracting stamp from image fullrun_pn_xmm0065940501_pi300-10000_cl_sm2.00.img.gz, (246, 260) - (367, 381)
[Wed Jul 18 14:17:58 2012] XMMSAS bgd. selection expression = annulus(26593.091760, 27822.175400, 5273.316152, 10546.632303, X, Y) && !ellipse(24917.486542, 23197.279785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28125.134000, 26559.078000, 1167.384034, 1167.384034, 0.000000, X, Y) && !ellipse(19183.430389, 34220.974701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28383.401611, 37326.626190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17201.383316, 29859.988190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18217.241333, 26385.717743, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 14:17:58 2012] Writing fullrun_pn_xmm0065940501_pi300-10000_pass1_cl_src1.gif
[Wed Jul 18 14:18:19 2012] Mean detx,y = (41.54, -214.50) 
[Wed Jul 18 14:18:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 14:22:42 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 14:22:42 2012] Setting source spectrum file to fullrun_pn_xmm0065940501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 14:22:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0065940501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 18 15:59:31 2012] Updating aperture counts using extracted products
[Wed Jul 18 15:59:31 2012] Error reading totcts from fullrun_pn_xmm0065940501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 15:59:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 15:59:31 2012] Using photon index=1.80, rate=2.5, arf fullrun_pn_xmm0065940501_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 15:59:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 15:59:32 2012] Updating source flux to 5.7e-12
[Wed Jul 18 16:00:39 2012] Reading fit data from xmm0065940501/analysis//spectral/fullrun_pn_xmm0065940501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 18 16:00:39 2012] Spectral fit parameter nH value = 3.88531e+20
[Wed Jul 18 16:00:39 2012] Spectral fit parameter PhoIndex value = 1.80148
[Wed Jul 18 16:00:39 2012] Failed to get F(0.3-8.0) from xmm0065940501/analysis//spectral/fullrun_pn_xmm0065940501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 18 16:00:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 16:00:39 2012] Using Nh = 3.9e+20, photon index=1.80, rate=2.5, arf fullrun_pn_xmm0065940501_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 16:00:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 16:00:39 2012] Updating source flux to 6.3e-12