[Wed Jul 18 10:18:34 2012] Detection parameters:
  Position = (310.3, 450.6) = 9 23 37.71 -21 26 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.1 +/- 18.1
  Background counts = 26.0
  Rate = 0.01 +/- 0.001

[Wed Jul 18 10:18:34 2012] Off-axis axis estimate = 11.07'
[Wed Jul 18 12:09:52 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 12:09:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 12:09:52 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Wed Jul 18 12:09:52 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.160
[Wed Jul 18 12:09:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.96"
[Wed Jul 18 12:29:51 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 18 12:29:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src3.csv
[Wed Jul 18 12:29:51 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 18 12:29:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src3.csv
[Wed Jul 18 12:29:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 12:29:51 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 18 12:29:51 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 18 12:29:51 2012] Fit fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 18 12:30:02 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.195867 pixels away
[Wed Jul 18 12:30:02 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 12:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 12:30:02 2012] Assessing source extent using major
[Wed Jul 18 12:30:02 2012] Source does appear to be extended
[Wed Jul 18 12:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 13:59:21 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 13:59:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 13:59:21 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Wed Jul 18 13:59:21 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.160
[Wed Jul 18 13:59:21 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.96"
[Wed Jul 18 14:17:36 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 18 14:17:36 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 18 14:17:36 2012] Fit fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Jul 18 14:17:36 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 18 14:17:36 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 18 14:17:36 2012] Fit fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jul 18 14:17:47 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.349824 pixels away
[Wed Jul 18 14:17:47 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 14:17:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 14:17:47 2012] Assessing source extent using major
[Wed Jul 18 14:17:47 2012] Source does appear to be extended
[Wed Jul 18 14:17:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 15:44:13 2012] XMMSAS src. selection expression = ellipse(26945.663422, 39157.173309, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 15:44:13 2012] Writing source region out to fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src5_src.reg
[Wed Jul 18 15:44:13 2012] Extracting stamp from image fullrun_mos2_xmm0065940501_pi300-10000_cl_sm2.00.img.gz, (273, 413) - (348, 488)
[Wed Jul 18 15:44:13 2012] XMMSAS bgd. selection expression = annulus(26945.663422, 39157.173309, 1087.500000, 2175.000000, X, Y)
[Wed Jul 18 15:44:13 2012] Writing fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src5.gif
[Wed Jul 18 15:48:11 2012] Mean detx,y = (-2709.93, 11042.81) 
[Wed Jul 18 15:48:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 15:48:19 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 15:48:19 2012] Setting source spectrum file to fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 18 15:48:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jul 18 15:55:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 15:55:20 2012] rmf not generated due to insufficient counts
[Wed Jul 18 15:59:32 2012] Updating aperture counts using extracted products
[Wed Jul 18 15:59:32 2012] Error reading totcts from fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 18 15:59:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 15:59:32 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src5.arf
[Wed Jul 18 15:59:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 15:59:32 2012] Updating source flux to 2e-13
[Wed Jul 18 15:59:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting