[Wed Jul 18 10:18:34 2012] Detection parameters:
  Position = (164.7, 397.1) = 9 24 23.08 -21 30 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.3 +/- 15.6
  Background counts = 21.8
  Rate = 0.007 +/- 0.0009

[Wed Jul 18 10:18:34 2012] Off-axis axis estimate = 12.05'
[Wed Jul 18 12:09:52 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 12:09:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 12:09:52 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Wed Jul 18 12:09:52 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.929
[Wed Jul 18 12:09:52 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.45"
[Wed Jul 18 12:29:51 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul 18 12:29:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src4.csv
[Wed Jul 18 12:29:51 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul 18 12:29:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src4.csv
[Wed Jul 18 12:29:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 12:29:51 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul 18 12:29:51 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul 18 12:29:51 2012] Fit fullrun_mos2_xmm0065940501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jul 18 12:30:02 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.311520 pixels away
[Wed Jul 18 12:30:02 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 12:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 12:30:02 2012] Assessing source extent using major
[Wed Jul 18 12:30:02 2012] Source does appear to be extended
[Wed Jul 18 12:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 13:59:21 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 13:59:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 13:59:21 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Wed Jul 18 13:59:21 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.929
[Wed Jul 18 13:59:21 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.45"
[Wed Jul 18 14:17:36 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 18 14:17:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_src4.csv
[Wed Jul 18 14:17:36 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 18 14:17:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_src4.csv
[Wed Jul 18 14:17:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 14:17:36 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 18 14:17:36 2012] fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 18 14:17:36 2012] Fit fullrun_mos2_xmm0065940501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul 18 14:17:47 2012] Spatial fit model total counts = 174.023000, observed total counts = 175.000000
[Wed Jul 18 14:17:47 2012] Offset between fit and detection position for source 2 = 0.166227 pixels
[Wed Jul 18 14:17:47 2012] 172.249000 total counts/ 98.377900 bgd. counts: snr = 7.447762
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.166227 pixels
  Position = (164.6, 397.0) = 9 24 23.12 -21 30 13.5
  Extent = 5.7 (4.6-6.9)", rotation angle = 0
  Source counts = 73.9 +/- 13.1
  Background counts = 98.4
  Rate = 0.005 +/- 0.0009
[Wed Jul 18 14:17:47 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 14:17:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 14:17:47 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 14:17:47 2012] Source does appear to be extended
[Wed Jul 18 14:17:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 15:44:13 2012] XMMSAS src. selection expression = ellipse(14271.664640, 34486.475400, 342.254410, 342.254410, 0.000000, X, Y)
[Wed Jul 18 15:44:13 2012] Writing source region out to fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 18 15:44:13 2012] Extracting stamp from image fullrun_mos2_xmm0065940501_pi300-10000_cl_sm2.00.img.gz, (145, 377) - (184, 417)
[Wed Jul 18 15:44:13 2012] XMMSAS bgd. selection expression = annulus(14271.664640, 34486.475400, 570.424016, 1140.848033, X, Y) && !ellipse(12528.510513, 32916.410126, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 15:44:13 2012] Writing fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src2.gif
[Wed Jul 18 15:48:23 2012] Mean detx,y = (10652.09, 9299.81) 
[Wed Jul 18 15:48:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 15:48:32 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 15:48:32 2012] Setting source spectrum file to fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 18 15:48:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 18 15:55:25 2012] Not generating rmf since there are only 73 counts
[Wed Jul 18 15:55:25 2012] rmf not generated due to insufficient counts
[Wed Jul 18 15:59:32 2012] Updating aperture counts using extracted products
[Wed Jul 18 15:59:32 2012] Error reading totcts from fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 18 15:59:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 15:59:32 2012] Using photon index=1.80, rate=0.005, arf fullrun_mos2_xmm0065940501_pi300-10000_pass1_cl_src2.arf
[Wed Jul 18 15:59:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 15:59:32 2012] Updating source flux to 2e-13
[Wed Jul 18 15:59:53 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting