[Mon Jun 10 04:17:28 2013] Detection parameters:
  Position = (274.4, 388.1) = 18 30 1.44 1 20 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 14.7
  Background counts = 63.4
  Rate = 0.007 +/- 0.001

[Mon Jun 10 04:17:29 2013] Off-axis axis estimate = 6.73'
[Mon Jun 10 04:18:21 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 04:18:21 2013] Initial guess for spatial extent in simple fitting = 9.79"
[Mon Jun 10 04:18:21 2013] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.759
[Mon Jun 10 04:18:21 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 9.79"
[Mon Jun 10 08:36:08 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jun 10 08:36:08 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jun 10 08:36:08 2013] Fit fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_src49 appears to have run properly
[Mon Jun 10 08:36:10 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jun 10 08:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 10 08:36:10 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jun 10 08:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 10 08:36:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:36:23 2013] Warning, spatial fit 49 centroid is now closest to src. 53
[Mon Jun 10 08:36:23 2013] Source 49 is offset by -4.919473 and 0.505343 pixels which is larger than
2 X fitted extent = 4.762529 x 4.762529, not incorporating fit results
[Mon Jun 10 08:36:23 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:36:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:36:23 2013] Assessing source extent using major
[Mon Jun 10 08:36:23 2013] Source does appear to be extended
[Mon Jun 10 08:36:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:36:23 2013] Source is confused with source 47
[Mon Jun 10 08:36:29 2013] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 08:36:29 2013] Initial guess for spatial extent in simple fitting = 9.79"
[Mon Jun 10 08:36:29 2013] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.759
[Mon Jun 10 08:36:29 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 9.79"
[Mon Jun 10 12:23:45 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_src44.ximg exists
[Mon Jun 10 12:23:45 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_src44_1.ximg exists
[Mon Jun 10 12:23:45 2013] Fit fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_src44 appears to have run properly
[Mon Jun 10 12:23:46 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Mon Jun 10 12:23:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src44.csv
[Mon Jun 10 12:23:46 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Mon Jun 10 12:23:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src44.csv
[Mon Jun 10 12:23:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 12:23:59 2013] Warning, spatial fit 44 centroid is now closest to src. 53
[Mon Jun 10 12:23:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 12:23:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 12:23:59 2013] Assessing source extent using major
[Mon Jun 10 12:23:59 2013] Source does appear to be extended
[Mon Jun 10 12:23:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 12:24:06 2013] XMMSAS src. selection expression = ellipse(23826.335876, 33718.406860, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 12:24:06 2013] Writing source region out to fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src49_src.reg
[Mon Jun 10 12:24:06 2013] Extracting stamp from image fullrun_mos2_xmm0065820501_pi300-10000_cl_sm2.00.img.gz, (237, 351) - (312, 426)
[Mon Jun 10 12:24:06 2013] XMMSAS bgd. selection expression = annulus(23826.335876, 33718.406860, 1087.500000, 2175.000000, X, Y) && !ellipse(25527.118439, 35568.590576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22762.630249, 35263.883484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21632.469238, 34913.414307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24217.010162, 34358.199890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25348.753571, 34274.303619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22864.416107, 34441.575775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21246.550110, 34006.389923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22649.040131, 33733.365295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21952.984375, 33663.885834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.340607, 33187.942627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23027.819885, 33360.469086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24681.443817, 32877.105072, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 12:24:06 2013] Writing fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src49.gif
[Mon Jun 10 12:34:56 2013] Mean detx,y = (-3857.61, -7885.57) 
[Mon Jun 10 12:34:57 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 12:35:06 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 12:35:06 2013] Setting source spectrum file to fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon Jun 10 12:35:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Mon Jun 10 12:38:28 2013] Not generating rmf since there are only 74 counts
[Mon Jun 10 12:38:28 2013] rmf not generated due to insufficient counts
[Mon Jun 10 12:38:59 2013] Updating aperture counts using extracted products
[Mon Jun 10 12:38:59 2013] Total counts from fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 23.00
[Mon Jun 10 12:39:00 2013] Total counts from fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src49_bgd.pi.gz = 43.00
[Mon Jun 10 12:39:00 2013] Got source and background scale factors 1204984.000000, 2602026.000000
[Mon Jun 10 12:39:00 2013] User source parameters:
  Position = (274.4, 388.1) = 18 30 1.44 1 20 19.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3.1 +/- 5.9
  Background aperture counts = 19.9
  Rate = 0.0002 +/- 0.0005

[Mon Jun 10 12:39:00 2013] Updating counts from extracted products
[Mon Jun 10 12:39:00 2013] Set source signif. to 3.09/4.46 = 0.69
[Mon Jun 10 12:39:01 2013] No arf file for this source, not re-computing flux
[Mon Jun 10 12:39:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 12:39:03 2013] xmm0065820501/analysis//spectral/fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete