[Mon Jun 10 04:17:28 2013] Detection parameters:
  Position = (244.8, 391.4) = 18 30 10.05 1 20 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.6 +/- 15.8
  Background counts = 79.2
  Rate = 0.006 +/- 0.001

[Mon Jun 10 04:17:29 2013] Off-axis axis estimate = 7.78'
[Mon Jun 10 04:18:21 2013] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 04:18:21 2013] Initial guess for spatial extent in simple fitting = 10.32"
[Mon Jun 10 04:18:21 2013] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.879
[Mon Jun 10 04:18:21 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 10.32"
[Mon Jun 10 08:36:08 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_src48.ximg exists
[Mon Jun 10 08:36:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_src48.csv
[Mon Jun 10 08:36:08 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_src48_1.ximg exists
[Mon Jun 10 08:36:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_src48.csv
[Mon Jun 10 08:36:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:36:10 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Mon Jun 10 08:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src48.csv
[Mon Jun 10 08:36:10 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Mon Jun 10 08:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src48.csv
[Mon Jun 10 08:36:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820501_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:36:23 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 13.318184 pixels away
[Mon Jun 10 08:36:23 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:36:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:36:23 2013] Assessing source extent using major
[Mon Jun 10 08:36:23 2013] Source does appear to be extended
[Mon Jun 10 08:36:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:36:29 2013] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 08:36:29 2013] Initial guess for spatial extent in simple fitting = 10.32"
[Mon Jun 10 08:36:29 2013] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.879
[Mon Jun 10 08:36:29 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 10.32"
[Mon Jun 10 12:23:45 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_src43.ximg exists
[Mon Jun 10 12:23:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_src43.csv
[Mon Jun 10 12:23:45 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon Jun 10 12:23:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_src43.csv
[Mon Jun 10 12:23:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 12:23:46 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon Jun 10 12:23:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src43.csv
[Mon Jun 10 12:23:46 2013] fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon Jun 10 12:23:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src43.csv
[Mon Jun 10 12:23:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820501_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 12:23:59 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.945750 pixels away
[Mon Jun 10 12:23:59 2013] Source 48 is offset by 1.974553 and -0.531311 pixels which is larger than
2 X fitted extent = 1.195954 x 1.195954, not incorporating fit results
[Mon Jun 10 12:23:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 12:23:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 12:23:59 2013] Assessing source extent using major
[Mon Jun 10 12:23:59 2013] Source does appear to be extended
[Mon Jun 10 12:23:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 12:24:06 2013] XMMSAS src. selection expression = ellipse(21246.550110, 34006.389923, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 12:24:06 2013] Writing source region out to fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src48_src.reg
[Mon Jun 10 12:24:06 2013] Extracting stamp from image fullrun_mos2_xmm0065820501_pi300-10000_cl_sm2.00.img.gz, (207, 354) - (282, 429)
[Mon Jun 10 12:24:06 2013] XMMSAS bgd. selection expression = annulus(21246.550110, 34006.389923, 1087.500000, 2175.000000, X, Y) && !ellipse(22762.630249, 35263.883484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21632.469238, 34913.414307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20018.281784, 34448.638153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24217.010162, 34358.199890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22864.416107, 34441.575775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23826.335876, 33718.406860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22649.040131, 33733.365295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21952.984375, 33663.885834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23027.819885, 33360.469086, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 12:24:06 2013] Writing fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src48.gif
[Mon Jun 10 12:34:39 2013] Mean detx,y = (-6298.33, -7325.87) 
[Mon Jun 10 12:34:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 12:34:54 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 12:34:54 2013] Setting source spectrum file to fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Jun 10 12:34:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Mon Jun 10 12:38:27 2013] Not generating rmf since there are only 75 counts
[Mon Jun 10 12:38:27 2013] rmf not generated due to insufficient counts
[Mon Jun 10 12:38:59 2013] Updating aperture counts using extracted products
[Mon Jun 10 12:38:59 2013] Total counts from fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 15.00
[Mon Jun 10 12:38:59 2013] Total counts from fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src48_bgd.pi.gz = 111.00
[Mon Jun 10 12:38:59 2013] Got source and background scale factors 1106480.000000, 5048905.000000
[Mon Jun 10 12:38:59 2013] User source parameters:
  Position = (244.8, 391.4) = 18 30 10.05 1 20 40.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -9.3 +/- 5.0
  Background aperture counts = 24.3
  Rate = -0.0007 +/- 0.0004

[Mon Jun 10 12:38:59 2013] Updating counts from extracted products
[Mon Jun 10 12:38:59 2013] Set source signif. to -9.33/4.93 = -1.89
[Mon Jun 10 12:39:01 2013] No arf file for this source, not re-computing flux
[Mon Jun 10 12:39:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 12:39:03 2013] xmm0065820501/analysis//spectral/fullrun_mos2_xmm0065820501_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete