[Thu May 2 10:12:24 2013] Detection parameters: Position = (268.0, 435.4) = 3 29 16.63 31 23 51.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 85.7 +/- 17.4 Background counts = 87.3 Rate = 0.002 +/- 0.0004 [Thu May 2 10:12:25 2013] Off-axis axis estimate = 10.17' [Thu May 2 10:12:48 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting [Thu May 2 10:12:48 2013] Initial guess for spatial extent in simple fitting = 11.52" [Thu May 2 10:12:48 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.060 [Thu May 2 10:12:48 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.52" [Thu May 2 10:12:49 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src9.ximg exists [Thu May 2 10:12:49 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src9_1.ximg exists [Thu May 2 10:12:49 2013] Fit fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src9 appears to have run properly [Thu May 2 10:12:50 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Thu May 2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src9.csv [Thu May 2 10:12:50 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Thu May 2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src9.csv [Thu May 2 10:12:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 10:12:59 2013] Source 9 is offset by -8.170419 and 2.262717 pixels which is larger than 2 X fitted extent = 1.397117 x 1.397117, not incorporating fit results [Thu May 2 10:12:59 2013] Warning, spatial fit 9 centroid is now closest to src. 11 [Thu May 2 10:12:59 2013] Vigneting correction estimate = 1.000000 [Thu May 2 10:12:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 10:12:59 2013] Assessing source extent using major [Thu May 2 10:12:59 2013] Source does appear to be extended [Thu May 2 10:12:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 10:13:19 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting [Thu May 2 10:13:19 2013] Initial guess for spatial extent in simple fitting = 11.52" [Thu May 2 10:13:19 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.060 [Thu May 2 10:13:19 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 11.52" [Thu May 2 10:13:19 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src9.ximg exists [Thu May 2 10:13:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src9.csv [Thu May 2 10:13:19 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src9_1.ximg exists [Thu May 2 10:13:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src9.csv [Thu May 2 10:13:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 10:13:20 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Thu May 2 10:13:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src9.csv [Thu May 2 10:13:20 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Thu May 2 10:13:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src9.csv [Thu May 2 10:13:20 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 10:13:29 2013] Spatial fit model total counts = 1153.400000, observed total counts = 883.000000 [Thu May 2 10:13:29 2013] Poor agreement between spatial fit and data for source 9 It may help to tweak spatial fit manually Not incorporating fit results [Thu May 2 10:13:29 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.524750 pixels away [Thu May 2 10:13:29 2013] Vigneting correction estimate = 1.000000 [Thu May 2 10:13:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 10:13:29 2013] Assessing source extent using major [Thu May 2 10:13:29 2013] Source does appear to be extended [Thu May 2 10:13:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 10:13:49 2013] XMMSAS src. selection expression = ellipse(23268.065521, 37834.748352, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 2 10:13:49 2013] Not overwriting source region fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_src.reg [Thu May 2 10:13:49 2013] Extracting stamp from image fullrun_pn_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (231, 398) - (306, 473) [Thu May 2 10:13:49 2013] XMMSAS bgd. selection expression = annulus(23268.065521, 37834.748352, 1087.500000, 2175.000000, X, Y) && !ellipse(24863.724854, 35645.705902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22986.121432, 36575.491908, 585.174224, 349.177333, 322.211067, X, Y) && !ellipse(22428.701904, 39209.033997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21866.142400, 38375.232400, 312.424009, 312.424009, 0.000000, X, Y) && !ellipse(21474.879963, 37494.785158, 499.919183, 266.666475, 323.161485, X, Y) && !ellipse(22706.563995, 37365.020569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25461.913574, 36687.446472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.464874, 36273.909729, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 10:13:49 2013] Writing fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9.gif [Thu May 2 10:13:51 2013] ../../xmm0065820101/products/events/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0065820101/products/events/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create [Thu May 2 10:13:52 2013] Mean detx,y = (-7031.48, -9046.18) [Thu May 2 10:13:52 2013] ../../xmm0065820101/products/images/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_src.img and ../../xmm0065820101/products/images/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create [Thu May 2 10:13:52 2013] ../../xmm0065820101/products/spectra/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create [Thu May 2 10:13:52 2013] Setting source spectrum file to fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Thu May 2 10:13:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_bgd.pi.gz [Thu May 2 10:13:52 2013] ../../xmm0065820101/products/lightcurves/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create [Thu May 2 10:14:01 2013] Not generating rmf since there are only 85 counts [Thu May 2 10:14:01 2013] rmf not generated due to insufficient counts [Thu May 2 10:14:01 2013] fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9.arf exists, delete to re-create [Thu May 2 11:00:59 2013] Updating aperture counts using extracted products [Thu May 2 11:00:59 2013] Total counts from fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 602.00 [Thu May 2 11:00:59 2013] Total counts from fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1789.00 [Thu May 2 11:00:59 2013] Got source and background scale factors 1204794.000000, 5295011.000000 [Thu May 2 11:00:59 2013] User source parameters: Position = (268.0, 435.4) = 3 29 16.63 31 23 51.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 194.9 +/- 25.6 Background aperture counts = 407.1 Rate = 0.005 +/- 0.0006 [Thu May 2 11:00:59 2013] Updating counts from extracted products [Thu May 2 11:00:59 2013] Set source signif. to 194.94/20.18 = 9.66 [Thu May 2 11:01:06 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 11:01:06 2013] Using photon index=1.80, rate=0.00458, arf fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9.arf [Thu May 2 11:01:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 11:01:06 2013] Updating source flux to 3.6e-14 [Thu May 2 11:01:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 2 11:01:43 2013] xmm0065820101/analysis//spectral/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete