[Thu May 2 10:12:24 2013] Detection parameters: Position = (252.1, 441.9) = 3 29 22.04 31 24 17.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 182.8 +/- 21.2 Background counts = 83.4 Rate = 0.004 +/- 0.0004 [Thu May 2 10:12:25 2013] Off-axis axis estimate = 10.93' [Thu May 2 10:12:48 2013] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting [Thu May 2 10:12:48 2013] Initial guess for spatial extent in simple fitting = 11.89" [Thu May 2 10:12:48 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860 [Thu May 2 10:12:48 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 11.89" [Thu May 2 10:12:49 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src8.ximg exists [Thu May 2 10:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src8.csv [Thu May 2 10:12:49 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src8_1.ximg exists [Thu May 2 10:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src8.csv [Thu May 2 10:12:49 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 10:12:50 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Thu May 2 10:12:50 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Thu May 2 10:12:50 2013] Fit fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Thu May 2 10:12:59 2013] Source 8 is offset by 5.751680 and 1.579785 pixels which is larger than 2 X fitted extent = 1.401922 x 1.401922, not incorporating fit results [Thu May 2 10:12:59 2013] Spatial fit model total counts = 891.118000, observed total counts = 814.000000 [Thu May 2 10:12:59 2013] Offset between fit and detection position for source 8 = 0.321621 pixels [Thu May 2 10:12:59 2013] 892.892900 total counts/ 818.188000 bgd. counts: snr = 2.611695 Spatial fit parameters: Offset between fit and detection position for source 8 = 0.321621 pixels Position = (251.9, 441.7) = 3 29 22.10 31 24 15.4 Extent = 3.9 (3.0-5.3)", rotation angle = 0 Source counts = 74.7 +/- 29.9 Background counts = 818.2 Rate = 0.002 +/- 0.0007 [Thu May 2 10:12:59 2013] Vigneting correction estimate = 1.000000 [Thu May 2 10:12:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 10:12:59 2013] Assessing source extent using major axis lower bound [Thu May 2 10:12:59 2013] Source does appear to be extended [Thu May 2 10:12:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 10:13:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 2 10:13:19 2013] Initial guess for spatial extent in simple fitting = 3.91" [Thu May 2 10:13:19 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.152 [Thu May 2 10:13:19 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 3.91" [Thu May 2 10:13:19 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src8.ximg exists [Thu May 2 10:13:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src8.csv [Thu May 2 10:13:19 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src8_1.ximg exists [Thu May 2 10:13:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src8.csv [Thu May 2 10:13:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 10:13:20 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Thu May 2 10:13:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src8.csv [Thu May 2 10:13:20 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Thu May 2 10:13:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src8.csv [Thu May 2 10:13:20 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 10:13:29 2013] Spatial fit model total counts = 810.208000, observed total counts = 729.000000 [Thu May 2 10:13:29 2013] Poor agreement between spatial fit and data for source 8 It may help to tweak spatial fit manually Not incorporating fit results [Thu May 2 10:13:29 2013] Vigneting correction estimate = 1.000000 [Thu May 2 10:13:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 10:13:29 2013] Assessing source extent using major axis lower bound [Thu May 2 10:13:29 2013] Source does appear to be extended [Thu May 2 10:13:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 10:13:49 2013] XMMSAS src. selection expression = ellipse(21866.142400, 38375.232400, 234.318007, 234.318007, 0.000000, X, Y) [Thu May 2 10:13:49 2013] Not overwriting source region fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_src.reg [Thu May 2 10:13:49 2013] Extracting stamp from image fullrun_pn_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (238, 428) - (265, 455) [Thu May 2 10:13:49 2013] XMMSAS bgd. selection expression = annulus(21866.142400, 38375.232400, 390.530011, 781.060022, X, Y) && !ellipse(22428.701904, 39209.033997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23268.065521, 37834.748352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21474.879963, 37494.785158, 499.919183, 266.666475, 323.161485, X, Y) && !ellipse(22706.563995, 37365.020569, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 10:13:49 2013] Writing fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8.gif [Thu May 2 10:13:51 2013] ../../xmm0065820101/products/events/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0065820101/products/events/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create [Thu May 2 10:13:51 2013] Mean detx,y = (-8528.02, -9287.63) [Thu May 2 10:13:51 2013] ../../xmm0065820101/products/images/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_src.img and ../../xmm0065820101/products/images/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create [Thu May 2 10:13:51 2013] ../../xmm0065820101/products/spectra/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create [Thu May 2 10:13:51 2013] Setting source spectrum file to fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Thu May 2 10:13:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_bgd.pi.gz [Thu May 2 10:13:51 2013] ../../xmm0065820101/products/lightcurves/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create [Thu May 2 10:14:01 2013] Not generating rmf since there are only 74 counts [Thu May 2 10:14:01 2013] rmf not generated due to insufficient counts [Thu May 2 10:14:01 2013] fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8.arf exists, delete to re-create [Thu May 2 11:00:59 2013] Updating aperture counts using extracted products [Thu May 2 11:00:59 2013] Total counts from fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 144.00 [Thu May 2 11:00:59 2013] Total counts from fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 229.00 [Thu May 2 11:00:59 2013] Got source and background scale factors 171200.000000, 665949.000000 [Thu May 2 11:00:59 2013] User source parameters: Position = (251.9, 441.7) = 3 29 22.10 31 24 15.4 Extent = 3.9 (3.0-5.3)", rotation angle = 0 Source aperture counts = 85.1 +/- 13.0 Background aperture counts = 58.9 Rate = 0.002 +/- 0.0003 [Thu May 2 11:01:06 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 11:01:06 2013] Using photon index=1.80, rate=0.00176, arf fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8.arf [Thu May 2 11:01:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 11:01:06 2013] Updating source flux to 2.4e-14 [Thu May 2 11:01:35 2013] Flag b found in src. 8 procflags, skipping spectral fitting [Thu May 2 11:01:35 2013] Flag p found in src. 8 procflags, skipping spectral fitting [Thu May 2 11:01:35 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting [Thu May 2 11:01:43 2013] xmm0065820101/analysis//spectral/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete