[Thu May 2 10:12:24 2013] Detection parameters: Position = (286.3, 410.3) = 3 29 10.39 31 22 0.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2940.3 +/- 67.5 Background counts = 93.6 Rate = 0.1 +/- 0.003 [Thu May 2 10:12:25 2013] Off-axis axis estimate = 8.16' [Thu May 2 10:12:48 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting [Thu May 2 10:12:48 2013] Initial guess for spatial extent in simple fitting = 10.51" [Thu May 2 10:12:48 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.059 [Thu May 2 10:12:48 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.51" [Thu May 2 10:12:48 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src3.ximg exists [Thu May 2 10:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src3.csv [Thu May 2 10:12:49 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src3_1.ximg exists [Thu May 2 10:12:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src3.csv [Thu May 2 10:12:49 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 10:12:50 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Thu May 2 10:12:50 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Thu May 2 10:12:50 2013] Fit fullrun_pn_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Thu May 2 10:12:59 2013] Warning, spatial fit 3 centroid is now closest to src. 15 [Thu May 2 10:12:59 2013] Vigneting correction estimate = 1.000000 [Thu May 2 10:12:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 10:12:59 2013] Assessing source extent using major [Thu May 2 10:12:59 2013] Source does appear to be extended [Thu May 2 10:12:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 10:12:59 2013] Source is confused with source 15 [Thu May 2 10:13:19 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting [Thu May 2 10:13:19 2013] Initial guess for spatial extent in simple fitting = 10.51" [Thu May 2 10:13:19 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.059 [Thu May 2 10:13:19 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.51" [Thu May 2 10:13:19 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src3.ximg exists [Thu May 2 10:13:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src3.csv [Thu May 2 10:13:19 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src3_1.ximg exists [Thu May 2 10:13:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src3.csv [Thu May 2 10:13:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 10:13:20 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Thu May 2 10:13:20 2013] fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Thu May 2 10:13:20 2013] Fit fullrun_pn_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Thu May 2 10:13:29 2013] Warning, spatial fit 3 centroid is now closest to src. 14 [Thu May 2 10:13:29 2013] Vigneting correction estimate = 1.000000 [Thu May 2 10:13:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 10:13:29 2013] Assessing source extent using major [Thu May 2 10:13:29 2013] Source does appear to be extended [Thu May 2 10:13:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 10:13:49 2013] Counts = 2940.281982, rescaling region sizes by 2.000000 [Thu May 2 10:13:49 2013] XMMSAS src. selection expression = ellipse(24863.724854, 35645.705902, 1305.000000, 1305.000000, 0.000000, X, Y) [Thu May 2 10:13:49 2013] Not overwriting source region fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_src.reg [Thu May 2 10:13:49 2013] Extracting stamp from image fullrun_pn_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (211, 335) - (361, 485) [Thu May 2 10:13:49 2013] XMMSAS bgd. selection expression = annulus(24863.724854, 35645.705902, 4350.000000, 8700.000000, X, Y) && !ellipse(27701.576813, 28424.209412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22986.121432, 36575.491908, 585.174224, 349.177333, 322.211067, X, Y) && !ellipse(22428.701904, 39209.033997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21866.142400, 38375.232400, 312.424009, 312.424009, 0.000000, X, Y) && !ellipse(23268.065521, 37834.748352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21474.879963, 37494.785158, 499.919183, 266.666475, 323.161485, X, Y) && !ellipse(22706.563995, 37365.020569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33472.410431, 37180.469482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25461.913574, 36687.446472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.464874, 36273.909729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29547.807190, 36584.152557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.448822, 35448.092072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15615.539627, 34057.520477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29777.199066, 33197.681274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28142.847992, 33036.972351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33574.307800, 32671.356232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19169.690000, 32698.692000, 1615.720046, 1615.720046, 0.000000, X, Y) && !ellipse(20043.333313, 31603.580444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28369.566000, 31584.370000, 360.168810, 360.168810, 0.000000, X, Y) && !ellipse(29816.312958, 31241.585785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28026.578949, 30952.960205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24200.639200, 31160.784600, 455.458413, 455.458413, 0.000000, X, Y) && !ellipse(18728.442001, 30443.221130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31845.026154, 30302.955933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33447.353138, 30376.514800, 406.132012, 406.132012, 0.000000, X, Y) && !ellipse(28907.562805, 29401.804474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26006.502563, 29263.211945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31102.111786, 29297.156494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28331.514374, 28924.276215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28779.741730, 28996.700104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26813.843872, 28692.725800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23253.741638, 28828.052643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20300.122437, 29054.449646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21917.652600, 27993.960400, 466.685613, 466.685613, 0.000000, X, Y) && !ellipse(20649.083557, 41451.078796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28843.961578, 31200.698334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26517.701904, 29769.780914, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 10:13:49 2013] Writing fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3.gif [Thu May 2 10:13:50 2013] ../../xmm0065820101/products/events/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0065820101/products/events/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create [Thu May 2 10:13:51 2013] Mean detx,y = (-4851.73, -7584.78) [Thu May 2 10:13:51 2013] ../../xmm0065820101/products/images/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0065820101/products/images/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create [Thu May 2 10:13:51 2013] ../../xmm0065820101/products/spectra/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create [Thu May 2 10:13:51 2013] Setting source spectrum file to fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Thu May 2 10:13:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.pi.gz [Thu May 2 10:13:51 2013] ../../xmm0065820101/products/lightcurves/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create [Thu May 2 10:14:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 2 10:14:01 2013] rmf not generated due to insufficient counts [Thu May 2 10:14:01 2013] fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create [Thu May 2 11:00:58 2013] Updating aperture counts using extracted products [Thu May 2 11:00:58 2013] Total counts from fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 4314.00 [Thu May 2 11:00:58 2013] Total counts from fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 31885.00 [Thu May 2 11:00:58 2013] Got source and background scale factors 5140673.000000, 115287935.000000 [Thu May 2 11:00:58 2013] User source parameters: Position = (286.3, 410.3) = 3 29 10.39 31 22 0.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 2892.3 +/- 66.7 Background aperture counts = 1421.7 Rate = 0.07 +/- 0.002 [Thu May 2 11:00:58 2013] Updating counts from extracted products [Thu May 2 11:00:58 2013] Set source signif. to 2892.25/37.71 = 76.71 [Thu May 2 11:01:06 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 11:01:06 2013] Using photon index=1.80, rate=0.068, arf fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3.arf [Thu May 2 11:01:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 11:01:06 2013] Updating source flux to 3.5e-13 [Thu May 2 11:01:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 2 11:01:43 2013] xmm0065820101/analysis//spectral/fullrun_pn_xmm0065820101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete