[Thu May  2 10:12:27 2013] Detection parameters:
  Position = (343.6, 359.5) = 3 28 50.96 31 18 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.5 +/- 11.6
  Background counts = 32.7
  Rate = 0.001 +/- 0.0003

[Thu May  2 10:12:27 2013] Off-axis axis estimate = 5.51'
[Thu May  2 10:12:51 2013] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:51 2013] Initial guess for spatial extent in simple fitting = 9.18"
[Thu May  2 10:12:51 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.917
[Thu May  2 10:12:51 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 9.18"
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src34.ximg exists
[Thu May  2 10:12:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src34.csv
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu May  2 10:12:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src34.csv
[Thu May  2 10:12:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu May  2 10:12:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu May  2 10:12:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Thu May  2 10:12:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:07 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.600630 pixels away
[Thu May  2 10:13:07 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:07 2013] Assessing source extent using major
[Thu May  2 10:13:07 2013] Source does appear to be extended
[Thu May  2 10:13:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:21 2013] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:21 2013] Initial guess for spatial extent in simple fitting = 9.18"
[Thu May  2 10:13:21 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.917
[Thu May  2 10:13:21 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 9.18"
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src34.ximg exists
[Thu May  2 10:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src34.csv
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src34_1.ximg exists
[Thu May  2 10:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src34.csv
[Thu May  2 10:13:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Thu May  2 10:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Thu May  2 10:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Thu May  2 10:13:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:37 2013] Spatial fit model total counts = 317.069000, observed total counts = 280.000000
[Thu May  2 10:13:37 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 10:13:37 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:37 2013] Assessing source extent using major
[Thu May  2 10:13:37 2013] Source does appear to be extended
[Thu May  2 10:13:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:59:56 2013] XMMSAS src. selection expression = ellipse(29843.917297, 31232.014404, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 10:59:56 2013] Not overwriting source region fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_src.reg
[Thu May  2 10:59:56 2013] Extracting stamp from image fullrun_mos2_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (306, 322) - (381, 397)
[Thu May  2 10:59:56 2013] XMMSAS bgd. selection expression = annulus(29843.917297, 31232.014404, 1087.500000, 2175.000000, X, Y) && !ellipse(31058.764200, 29240.459400, 387.919211, 387.919211, 0.000000, X, Y) && !ellipse(31802.176636, 30329.944305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28804.765381, 28904.031616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.258575, 28932.642212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28376.773200, 31571.657800, 269.338408, 269.338408, 0.000000, X, Y) && !ellipse(28135.797235, 33052.328862, 422.428779, 290.095293, 21.680711, X, Y) && !ellipse(29661.997345, 33013.748810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29942.150726, 33672.546539, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 10:59:56 2013] Writing fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23.gif
[Thu May  2 10:59:57 2013] ../../xmm0065820101/products/events/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0065820101/products/events/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Thu May  2 10:59:57 2013] Mean detx,y = (-1017.40, 4597.88) 
[Thu May  2 10:59:57 2013] ../../xmm0065820101/products/images/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_src.img and ../../xmm0065820101/products/images/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Thu May  2 10:59:57 2013] ../../xmm0065820101/products/spectra/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Thu May  2 10:59:57 2013] Setting source spectrum file to fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu May  2 10:59:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu May  2 10:59:57 2013] ../../xmm0065820101/products/lightcurves/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Thu May  2 11:00:00 2013] Not generating rmf since there are only 56 counts
[Thu May  2 11:00:00 2013] rmf not generated due to insufficient counts
[Thu May  2 11:00:00 2013] fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Thu May  2 11:01:16 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:16 2013] Total counts from fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 192.00
[Thu May  2 11:01:16 2013] Total counts from fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1116.00
[Thu May  2 11:01:16 2013] Got source and background scale factors 1161532.000000, 7025330.000000
[Thu May  2 11:01:16 2013] User source parameters:
  Position = (343.6, 359.5) = 3 28 50.96 31 18 18.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 7.5 +/- 14.9
  Background aperture counts = 184.5
  Rate = 0.0001 +/- 0.0003

[Thu May  2 11:01:16 2013] Updating counts from extracted products
[Thu May  2 11:01:16 2013] Set source signif. to 7.49/13.58 = 0.55
[Thu May  2 11:01:17 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:17 2013] Using photon index=1.80, rate=0.000149, arf fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23.arf
[Thu May  2 11:01:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:18 2013] Updating source flux to 2.2e-15
[Thu May  2 11:01:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 11:01:35 2013] xmm0065820101/analysis//spectral/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete