[Thu May  2 10:12:26 2013] Detection parameters:
  Position = (325.2, 304.6) = 3 28 57.22 31 14 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4355.9 +/- 77.3
  Background counts = 31.8
  Rate = 0.09 +/- 0.002

[Thu May  2 10:12:27 2013] Off-axis axis estimate = 1.99'
[Thu May  2 10:12:51 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:51 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Thu May  2 10:12:51 2013] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.873
[Thu May  2 10:12:51 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.42"
[Thu May  2 10:12:51 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src1.csv
[Thu May  2 10:12:51 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src1.csv
[Thu May  2 10:12:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  2 10:12:52 2013] Fit fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May  2 10:13:07 2013] Spatial fit model total counts = 4059.580000, observed total counts = 3977.000000
[Thu May  2 10:13:07 2013] Offset between fit and detection position for source 2 = 0.041774 pixels
[Thu May  2 10:13:07 2013] 4055.870000 total counts/ 1120.890000 bgd. counts: snr = 87.664478
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.041774 pixels
  Position = (325.2, 304.6) = 3 28 57.21 31 14 19.4
  Extent = 4.9 (4.7-5.1)", rotation angle = 0
  Source counts = 2935.0 +/- 63.7
  Background counts = 1120.9
  Rate = 0.06 +/- 0.001
[Thu May  2 10:13:07 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:07 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:07 2013] Source does appear to be extended
[Thu May  2 10:13:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:21 2013] Initial guess for spatial extent in simple fitting = 4.89"
[Thu May  2 10:13:21 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.852
[Thu May  2 10:13:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 4.89"
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  2 10:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src1.csv
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  2 10:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src1.csv
[Thu May  2 10:13:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  2 10:13:22 2013] Fit fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May  2 10:13:37 2013] Spatial fit model total counts = 4039.340000, observed total counts = 3952.000000
[Thu May  2 10:13:37 2013] Offset between fit and detection position for source 2 = 0.008887 pixels
[Thu May  2 10:13:37 2013] 4020.410000 total counts/ 1072.470000 bgd. counts: snr = 90.017317
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008887 pixels
  Position = (325.2, 304.6) = 3 28 57.21 31 14 19.4
  Extent = 4.9 (4.7-5.1)", rotation angle = 0
  Source counts = 2947.9 +/- 63.4
  Background counts = 1072.5
  Rate = 0.06 +/- 0.001
[Thu May  2 10:13:37 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:37 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:37 2013] Source does appear to be extended
[Thu May  2 10:13:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:59:55 2013] Counts = 2947.940000, rescaling region sizes by 2.000000
[Thu May  2 10:59:55 2013] XMMSAS src. selection expression = ellipse(28245.282620, 26453.668000, 586.006817, 586.006817, 0.000000, X, Y)
[Thu May  2 10:59:55 2013] Not overwriting source region fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_src.reg
[Thu May  2 10:59:55 2013] Extracting stamp from image fullrun_mos2_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (292, 271) - (359, 338)
[Thu May  2 10:59:55 2013] XMMSAS bgd. selection expression = annulus(28245.282620, 26453.668000, 1953.356056, 3906.712112, X, Y) && !ellipse(27688.074200, 28239.639800, 427.208812, 379.614411, 24.157800, X, Y) && !ellipse(24222.848572, 31172.369171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31058.764200, 29240.459400, 387.919211, 387.919211, 0.000000, X, Y) && !ellipse(31802.176636, 30329.944305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28804.765381, 28904.031616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27991.967400, 22463.663200, 419.928012, 419.928012, 0.000000, X, Y) && !ellipse(27440.520080, 25635.287200, 382.479211, 382.479211, 0.000000, X, Y) && !ellipse(26796.183600, 28511.835000, 513.048015, 377.931211, -0.000000, X, Y) && !ellipse(28316.258575, 28932.642212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30785.272600, 23062.747000, 311.326409, 311.326409, 0.000000, X, Y) && !ellipse(25917.243877, 29250.904437, 799.535997, 238.754671, 27.636968, X, Y)
[Thu May  2 10:59:55 2013] Writing fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2.gif
[Thu May  2 10:59:56 2013] ../../xmm0065820101/products/events/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0065820101/products/events/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu May  2 10:59:56 2013] Mean detx,y = (-882.87, -435.17) 
[Thu May  2 10:59:56 2013] ../../xmm0065820101/products/images/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0065820101/products/images/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu May  2 10:59:56 2013] ../../xmm0065820101/products/spectra/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu May  2 10:59:56 2013] Setting source spectrum file to fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May  2 10:59:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May  2 10:59:56 2013] ../../xmm0065820101/products/lightcurves/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu May  2 11:00:00 2013] fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Thu May  2 11:00:00 2013] fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Thu May  2 11:01:13 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:13 2013] Total counts from fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 3674.00
[Thu May  2 11:01:13 2013] Total counts from fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 4331.00
[Thu May  2 11:01:13 2013] Got source and background scale factors 925416.000000, 30592196.000000
[Thu May  2 11:01:13 2013] User source parameters:
  Position = (325.2, 304.6) = 3 28 57.21 31 14 19.4
  Extent = 4.9 (4.7-5.1)", rotation angle = 0
  Source aperture counts = 3543.0 +/- 61.6
  Background aperture counts = 131.0
  Rate = 0.07 +/- 0.001

[Thu May  2 11:01:17 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:17 2013] Using photon index=1.80, rate=0.0586, arf fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2.arf
[Thu May  2 11:01:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:17 2013] Updating source flux to 6.6e-13
[Thu May  2 11:01:35 2013] xmm0065820101/analysis//spectral/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete