[Thu May  2 10:12:27 2013] Detection parameters:
  Position = (324.2, 380.3) = 3 28 57.54 31 19 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.6 +/- 16.5
  Background counts = 32.2
  Rate = 0.004 +/- 0.0004

[Thu May  2 10:12:27 2013] Off-axis axis estimate = 6.22'
[Thu May  2 10:12:51 2013] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:51 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Thu May  2 10:12:51 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.862
[Thu May  2 10:12:51 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.54"
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src21.ximg exists
[Thu May  2 10:12:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src21.csv
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu May  2 10:12:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src21.csv
[Thu May  2 10:12:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu May  2 10:12:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu May  2 10:12:52 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu May  2 10:12:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu May  2 10:12:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:07 2013] Warning, spatial fit 21 centroid is now closest to src. 17
[Thu May  2 10:13:07 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:07 2013] Assessing source extent using major
[Thu May  2 10:13:07 2013] Source does appear to be extended
[Thu May  2 10:13:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:21 2013] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:21 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Thu May  2 10:13:21 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.862
[Thu May  2 10:13:21 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 9.54"
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src21.ximg exists
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu May  2 10:13:22 2013] Fit fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_src21 appears to have run properly
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu May  2 10:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May  2 10:13:22 2013] fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May  2 10:13:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May  2 10:13:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:37 2013] Spatial fit model total counts = 339.895000, observed total counts = 316.000000
[Thu May  2 10:13:37 2013] Offset between fit and detection position for source 18 = 0.274547 pixels
[Thu May  2 10:13:37 2013] 340.928000 total counts/ 238.745000 bgd. counts: snr = 6.613198
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.274547 pixels
  Position = (324.0, 380.5) = 3 28 57.63 31 19 49.3
  Extent = 5.3" x 3.6", rotation angle = 22
  Source counts = 102.2 +/- 18.5
  Background counts = 238.7
  Rate = 0.002 +/- 0.0004
[Thu May  2 10:13:37 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:37 2013] Assessing source extent using major
[Thu May  2 10:13:37 2013] Source does appear to be extended
[Thu May  2 10:13:37 2013] Computing asymmetry using major and minor axis, asym = 1.46
[Thu May  2 10:59:56 2013] XMMSAS src. selection expression = ellipse(28135.797235, 33052.328862, 316.821584, 217.571470, 21.680711, X, Y)
[Thu May  2 10:59:56 2013] Not overwriting source region fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_src.reg
[Thu May  2 10:59:56 2013] Extracting stamp from image fullrun_mos2_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (306, 362) - (342, 399)
[Thu May  2 10:59:56 2013] XMMSAS bgd. selection expression = annulus(28135.797235, 33052.328862, 528.035974, 1056.071947, X, Y) && !ellipse(29661.997345, 33013.748810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29843.917297, 31232.014404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29942.150726, 33672.546539, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 10:59:56 2013] Writing fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18.gif
[Thu May  2 10:59:57 2013] ../../xmm0065820101/products/events/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0065820101/products/events/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Thu May  2 10:59:57 2013] Mean detx,y = (1177.06, 5837.53) 
[Thu May  2 10:59:57 2013] ../../xmm0065820101/products/images/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_src.img and ../../xmm0065820101/products/images/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Thu May  2 10:59:57 2013] ../../xmm0065820101/products/spectra/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Thu May  2 10:59:57 2013] Setting source spectrum file to fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May  2 10:59:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu May  2 10:59:57 2013] ../../xmm0065820101/products/lightcurves/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Thu May  2 11:00:00 2013] fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18.rmf exists, delete to re-create
[Thu May  2 11:00:00 2013] fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Thu May  2 11:01:15 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:15 2013] Total counts from fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 127.00
[Thu May  2 11:01:15 2013] Total counts from fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 258.00
[Thu May  2 11:01:15 2013] Got source and background scale factors 217600.000000, 1870467.000000
[Thu May  2 11:01:15 2013] User source parameters:
  Position = (324.0, 380.5) = 3 28 57.63 31 19 49.3
  Extent = 5.3" x 3.6", rotation angle = 22
  Source aperture counts = 97.0 +/- 12.3
  Background aperture counts = 30.0
  Rate = 0.002 +/- 0.0002

[Thu May  2 11:01:17 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:17 2013] Using photon index=1.80, rate=0.00203, arf fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18.arf
[Thu May  2 11:01:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:17 2013] Updating source flux to 4.3e-14
[Thu May  2 11:01:35 2013] xmm0065820101/analysis//spectral/fullrun_mos2_xmm0065820101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete