[Thu May  2 10:12:25 2013] Detection parameters:
  Position = (264.9, 421.1) = 3 29 17.69 31 22 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1143.9 +/- 39.5
  Background counts = 27.6
  Rate = 0.02 +/- 0.0008

[Thu May  2 10:12:26 2013] Off-axis axis estimate = 9.22'
[Thu May  2 10:12:50 2013] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:50 2013] Initial guess for spatial extent in simple fitting = 11.04"
[Thu May  2 10:12:50 2013] source mask rpix=2.5, npix_max = 36, mask sum = 29, frac = 0.786
[Thu May  2 10:12:50 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.04"
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src6.ximg exists
[Thu May  2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src6.csv
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May  2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src6.csv
[Thu May  2 10:12:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May  2 10:12:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:03 2013] Warning, spatial fit 6 centroid is now closest to src. 9
[Thu May  2 10:13:03 2013] Spatial fit model total counts = 632.772000, observed total counts = 621.000000
[Thu May  2 10:13:03 2013] Offset between fit and detection position for source 5 = 0.625806 pixels
[Thu May  2 10:13:03 2013] Warning, changing simple spatial fit ID from 6 to 20
[Thu May  2 10:13:03 2013] 640.124900 total counts/ 558.439000 bgd. counts: snr = 3.456680
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.625806 pixels
  Position = (265.2, 420.6) = 3 29 17.57 31 22 43.9
  Extent = 5.8 (4.4-6.9)", rotation angle = 0
  Source counts = 81.7 +/- 25.3
  Background counts = 558.4
  Rate = 0.002 +/- 0.0005
[Thu May  2 10:13:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:03 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:03 2013] Source does appear to be extended
[Thu May  2 10:13:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:20 2013] Initial guess for spatial extent in simple fitting = 5.77"
[Thu May  2 10:13:20 2013] source mask rpix=1.3, npix_max = 13, mask sum = 11, frac = 0.824
[Thu May  2 10:13:20 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 5.77"
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src6.ximg exists
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May  2 10:13:21 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src6 appears to have run properly
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:33 2013] Spatial fit model total counts = 1363.250000, observed total counts = 1245.000000
[Thu May  2 10:13:33 2013] Offset between fit and detection position for source 5 = 0.739669 pixels
[Thu May  2 10:13:33 2013] 1367.886000 total counts/ 517.507000 bgd. counts: snr = 37.381301
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.739669 pixels
  Position = (264.6, 421.0) = 3 29 17.78 31 22 45.7
  Extent = 7.0 (6.4-7.5)" x 4.2 (3.8-4.5)", rotation angle = 316 (310-322) degrees
  Source counts = 850.4 +/- 37.0
  Background counts = 517.5
  Rate = 0.02 +/- 0.0007
[Thu May  2 10:13:33 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:33 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:33 2013] Source does appear to be extended
[Thu May  2 10:13:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.42
[Thu May  2 10:14:01 2013] XMMSAS src. selection expression = ellipse(22973.332200, 36579.516932, 419.646612, 249.555607, 316.471900, X, Y)
[Thu May  2 10:14:01 2013] Not overwriting source region fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_src.reg
[Thu May  2 10:14:01 2013] Extracting stamp from image fullrun_mos1_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (241, 397) - (289, 445)
[Thu May  2 10:14:01 2013] XMMSAS bgd. selection expression = annulus(22973.332200, 36579.516932, 699.411020, 1398.822040, X, Y) && !ellipse(24881.236000, 35639.834800, 542.596816, 542.596816, 0.000000, X, Y) && !ellipse(22729.152985, 37367.540192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21499.475148, 37500.947587, 303.987499, 286.322886, 135.933972, X, Y) && !ellipse(22084.074000, 38420.846800, 1677.840048, 762.394422, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Writing fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5.gif
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu May  2 10:14:02 2013] Mean detx,y = (7937.57, -7297.59) 
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu May  2 10:14:02 2013] Setting source spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May  2 10:14:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu May  2 11:01:09 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:09 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 837.00
[Thu May  2 11:01:09 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 452.00
[Thu May  2 11:01:09 2013] Got source and background scale factors 247023.000000, 3010950.000000
[Thu May  2 11:01:09 2013] User source parameters:
  Position = (264.6, 421.0) = 3 29 17.78 31 22 45.7
  Extent = 7.0 (6.4-7.5)" x 4.2 (3.8-4.5)", rotation angle = 316 (310-322) degrees
  Source aperture counts = 799.9 +/- 29.9
  Background aperture counts = 37.1
  Rate = 0.02 +/- 0.0006

[Thu May  2 11:01:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:12 2013] Using photon index=1.80, rate=0.0169, arf fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5.arf
[Thu May  2 11:01:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:12 2013] Updating source flux to 4.6e-13
[Thu May  2 11:01:28 2013] xmm0065820101/analysis//spectral/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete