[Thu May  2 10:12:26 2013] Detection parameters:
  Position = (308.8, 328.1) = 3 29 2.78 31 16 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.2 +/- 20.9
  Background counts = 32.2
  Rate = 0.005 +/- 0.0004

[Thu May  2 10:12:26 2013] Off-axis axis estimate = 2.28'
[Thu May  2 10:12:50 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:50 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Thu May  2 10:12:50 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.797
[Thu May  2 10:12:50 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 7.57"
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src21.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src21.csv
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src21.csv
[Thu May  2 10:12:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu May  2 10:12:51 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu May  2 10:13:03 2013] Spatial fit model total counts = 780.585000, observed total counts = 742.000000
[Thu May  2 10:13:03 2013] Offset between fit and detection position for source 36 = 0.202172 pixels
[Thu May  2 10:13:03 2013] 806.938000 total counts/ 694.167000 bgd. counts: snr = 4.280214
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.202172 pixels
  Position = (308.6, 328.1) = 3 29 2.85 31 16 1.7
  Extent = 4.1 (3.3-4.9)", rotation angle = 0
  Source counts = 112.8 +/- 28.4
  Background counts = 694.2
  Rate = 0.002 +/- 0.0006
[Thu May  2 10:13:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:03 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:03 2013] Source does appear to be extended
[Thu May  2 10:13:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:20 2013] Initial guess for spatial extent in simple fitting = 4.11"
[Thu May  2 10:13:20 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.079
[Thu May  2 10:13:20 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 4.11"
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src21.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src21.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src21.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May  2 10:13:21 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu May  2 10:13:33 2013] Spatial fit model total counts = 682.386000, observed total counts = 661.000000
[Thu May  2 10:13:33 2013] Offset between fit and detection position for source 36 = 0.056707 pixels
[Thu May  2 10:13:33 2013] 697.796000 total counts/ 575.547000 bgd. counts: snr = 5.095713
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.056707 pixels
  Position = (308.6, 328.2) = 3 29 2.83 31 16 1.8
  Extent = 4.5 (3.4-5.7)", rotation angle = 0
  Source counts = 122.2 +/- 26.4
  Background counts = 575.5
  Rate = 0.002 +/- 0.0005
[Thu May  2 10:13:33 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:33 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:33 2013] Source does appear to be extended
[Thu May  2 10:13:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:14:01 2013] XMMSAS src. selection expression = ellipse(26803.093200, 28500.894800, 268.370408, 268.370408, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Not overwriting source region fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src36_src.reg
[Thu May  2 10:14:01 2013] Extracting stamp from image fullrun_mos1_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (293, 313) - (324, 344)
[Thu May  2 10:14:01 2013] XMMSAS bgd. selection expression = annulus(26803.093200, 28500.894800, 447.284013, 894.568026, X, Y) && !ellipse(27710.722000, 28366.766000, 347.791210, 347.791210, 0.000000, X, Y) && !ellipse(28321.889893, 28925.234680, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Writing fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src36.gif
[Thu May  2 10:16:12 2013] Mean detx,y = (1320.65, -1263.25) 
[Thu May  2 10:16:12 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 10:16:17 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 10:16:17 2013] Setting source spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu May  2 10:16:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu May  2 11:01:10 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:10 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 197.00
[Thu May  2 11:01:10 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src36_bgd.pi.gz = 428.00
[Thu May  2 11:01:10 2013] Got source and background scale factors 230400.000000, 1589720.000000
[Thu May  2 11:01:11 2013] User source parameters:
  Position = (308.6, 328.2) = 3 29 2.83 31 16 1.8
  Extent = 4.5 (3.4-5.7)", rotation angle = 0
  Source aperture counts = 135.0 +/- 15.1
  Background aperture counts = 62.0
  Rate = 0.003 +/- 0.0003

[Thu May  2 11:01:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:13 2013] Using photon index=1.80, rate=0.00243, arf fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src36.arf
[Thu May  2 11:01:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:13 2013] Updating source flux to 3.5e-14
[Thu May  2 11:01:28 2013] xmm0065820101/analysis//spectral/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete