[Thu May  2 10:12:26 2013] Detection parameters:
  Position = (357.8, 336.8) = 3 28 46.16 31 16 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 396.4 +/- 25.5
  Background counts = 30.7
  Rate = 0.008 +/- 0.0005

[Thu May  2 10:12:26 2013] Off-axis axis estimate = 5.12'
[Thu May  2 10:12:50 2013] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:50 2013] Initial guess for spatial extent in simple fitting = 8.99"
[Thu May  2 10:12:50 2013] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.911
[Thu May  2 10:12:50 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 8.99"
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src16.ximg exists
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu May  2 10:12:50 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src16 appears to have run properly
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu May  2 10:12:51 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Thu May  2 10:13:03 2013] Spatial fit model total counts = 615.771000, observed total counts = 600.000000
[Thu May  2 10:13:03 2013] Offset between fit and detection position for source 31 = 0.212071 pixels
[Thu May  2 10:13:03 2013] 610.341000 total counts/ 346.622000 bgd. counts: snr = 14.164895
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.212071 pixels
  Position = (357.6, 336.8) = 3 28 46.23 31 16 39.1
  Extent = 5.1 (4.4-5.6)", rotation angle = 0
  Source counts = 263.7 +/- 24.7
  Background counts = 346.6
  Rate = 0.005 +/- 0.0005
[Thu May  2 10:13:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:03 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:03 2013] Source does appear to be extended
[Thu May  2 10:13:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:20 2013] Initial guess for spatial extent in simple fitting = 5.08"
[Thu May  2 10:13:20 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.809
[Thu May  2 10:13:20 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 5.08"
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src16.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src16.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src16.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:33 2013] Warning, spatial fit 16 centroid is now closest to src. 30
[Thu May  2 10:13:33 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:33 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:33 2013] Source does appear to be extended
[Thu May  2 10:13:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:14:01 2013] XMMSAS src. selection expression = ellipse(31058.752000, 29248.942800, 304.851009, 304.851009, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Not overwriting source region fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src31_src.reg
[Thu May  2 10:14:01 2013] Extracting stamp from image fullrun_mos1_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (340, 319) - (375, 354)
[Thu May  2 10:14:01 2013] XMMSAS bgd. selection expression = annulus(31058.752000, 29248.942800, 508.085015, 1016.170029, X, Y) && !ellipse(31791.262060, 30362.290000, 421.762412, 329.419209, 212.836000, X, Y)
[Thu May  2 10:14:01 2013] Writing fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src31.gif
[Thu May  2 10:15:24 2013] Mean detx,y = (3271.34, 2584.53) 
[Thu May  2 10:15:24 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 10:15:29 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 10:15:29 2013] Setting source spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu May  2 10:15:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu May  2 11:01:10 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:10 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 319.00
[Thu May  2 11:01:10 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 347.00
[Thu May  2 11:01:10 2013] Got source and background scale factors 292800.000000, 2204788.000000
[Thu May  2 11:01:10 2013] User source parameters:
  Position = (357.6, 336.8) = 3 28 46.23 31 16 39.1
  Extent = 5.1 (4.4-5.6)", rotation angle = 0
  Source aperture counts = 272.9 +/- 18.9
  Background aperture counts = 46.1
  Rate = 0.005 +/- 0.0004

[Thu May  2 11:01:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:13 2013] Using photon index=1.80, rate=0.00524, arf fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src31.arf
[Thu May  2 11:01:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:13 2013] Updating source flux to 8e-14
[Thu May  2 11:01:28 2013] xmm0065820101/analysis//spectral/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete