[Thu May  2 10:12:25 2013] Detection parameters:
  Position = (319.1, 325.1) = 3 28 59.27 31 15 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2947.6 +/- 65.6
  Background counts = 32.6
  Rate = 0.06 +/- 0.001

[Thu May  2 10:12:26 2013] Off-axis axis estimate = 2.45'
[Thu May  2 10:12:50 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:50 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Thu May  2 10:12:50 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784
[Thu May  2 10:12:50 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.65"
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src2.ximg exists
[Thu May  2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src2.csv
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May  2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src2.csv
[Thu May  2 10:12:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May  2 10:12:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May  2 10:12:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:03 2013] Warning, spatial fit 2 centroid is now closest to src. 32
[Thu May  2 10:13:03 2013] Spatial fit model total counts = 1644.970000, observed total counts = 1596.000000
[Thu May  2 10:13:03 2013] Offset between fit and detection position for source 3 = 1.470203 pixels
[Thu May  2 10:13:03 2013] Warning, changing simple spatial fit ID from 2 to 23
[Thu May  2 10:13:03 2013] 1464.401000 total counts/ 806.360000 bgd. counts: snr = 23.173331
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.470203 pixels
  Position = (319.1, 326.6) = 3 28 59.29 31 15 55.1
  Extent = 4.3 (4.0-4.7)", rotation angle = 0
  Source counts = 658.0 +/- 38.3
  Background counts = 806.4
  Rate = 0.01 +/- 0.0008
[Thu May  2 10:13:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:03 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:03 2013] Source does appear to be extended
[Thu May  2 10:13:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:13:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:20 2013] Initial guess for spatial extent in simple fitting = 4.35"
[Thu May  2 10:13:20 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.001
[Thu May  2 10:13:20 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 4.35"
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src2.ximg exists
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May  2 10:13:21 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May  2 10:13:21 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May  2 10:13:33 2013] Spatial fit model total counts = 2947.400000, observed total counts = 2898.000000
[Thu May  2 10:13:33 2013] Offset between fit and detection position for source 3 = 1.389379 pixels
[Thu May  2 10:13:33 2013] 2960.710000 total counts/ 1055.090000 bgd. counts: snr = 58.666685
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.389379 pixels
  Position = (318.9, 325.2) = 3 28 59.33 31 15 49.0
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 1905.6 +/- 54.4
  Background counts = 1055.1
  Rate = 0.04 +/- 0.001
[Thu May  2 10:13:33 2013] Spatial fit model total counts = 1654.450000, observed total counts = 1596.000000
[Thu May  2 10:13:33 2013] Offset between fit and detection position for source 3 = 1.388312 pixels
[Thu May  2 10:13:33 2013] Warning, changing simple spatial fit ID from 2 to 23
[Thu May  2 10:13:33 2013] 1563.822000 total counts/ 906.156000 bgd. counts: snr = 21.847609
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.388312 pixels
  Position = (319.1, 326.6) = 3 28 59.29 31 15 55.1
  Extent = 4.3 (4.0-4.7)", rotation angle = 0
  Source counts = 657.7 +/- 39.5
  Background counts = 906.2
  Rate = 0.01 +/- 0.0008
[Thu May  2 10:13:33 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:33 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:33 2013] Source does appear to be extended
[Thu May  2 10:13:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:14:01 2013] XMMSAS src. selection expression = ellipse(27710.722000, 28366.766000, 260.843408, 260.843408, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Not overwriting source region fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_src.reg
[Thu May  2 10:14:01 2013] Extracting stamp from image fullrun_mos1_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (304, 312) - (334, 342)
[Thu May  2 10:14:01 2013] XMMSAS bgd. selection expression = annulus(27710.722000, 28366.766000, 434.739013, 869.478025, X, Y) && !ellipse(28811.711600, 29045.922600, 319.037609, 319.037609, 0.000000, X, Y) && !ellipse(26803.093200, 28500.894800, 357.827210, 357.827210, 0.000000, X, Y) && !ellipse(28321.889893, 28925.234680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28929.097748, 29414.970764, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Writing fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3.gif
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu May  2 10:14:02 2013] Mean detx,y = (1356.43, -340.55) 
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu May  2 10:14:02 2013] Setting source spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May  2 10:14:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu May  2 11:01:08 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:08 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1810.00
[Thu May  2 11:01:08 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 389.00
[Thu May  2 11:01:08 2013] Got source and background scale factors 214400.000000, 912916.000000
[Thu May  2 11:01:08 2013] User source parameters:
  Position = (319.1, 326.6) = 3 28 59.29 31 15 55.1
  Extent = 4.3 (4.0-4.7)", rotation angle = 0
  Source aperture counts = 1718.6 +/- 43.6
  Background aperture counts = 91.4
  Rate = 0.03 +/- 0.0009

[Thu May  2 11:01:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:12 2013] Using photon index=1.80, rate=0.0131, arf fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3.arf
[Thu May  2 11:01:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:12 2013] Updating source flux to 1.9e-13
[Thu May  2 11:01:28 2013] xmm0065820101/analysis//spectral/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete