[Thu May  2 10:12:26 2013] Detection parameters:
  Position = (461.7, 348.8) = 3 28 10.90 31 17 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.9 +/- 23.1
  Background counts = 25.8
  Rate = 0.01 +/- 0.0009

[Thu May  2 10:12:26 2013] Off-axis axis estimate = 12.38'
[Thu May  2 10:12:50 2013] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 10:12:50 2013] Initial guess for spatial extent in simple fitting = 12.62"
[Thu May  2 10:12:50 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.059
[Thu May  2 10:12:50 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 12.62"
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src9.ximg exists
[Thu May  2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src9.csv
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu May  2 10:12:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src9.csv
[Thu May  2 10:12:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu May  2 10:12:51 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu May  2 10:13:03 2013] Spatial fit model total counts = 621.582000, observed total counts = 609.000000
[Thu May  2 10:13:03 2013] Offset between fit and detection position for source 28 = 0.394459 pixels
[Thu May  2 10:13:03 2013] 614.656000 total counts/ 403.181000 bgd. counts: snr = 10.531955
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.394459 pixels
  Position = (461.4, 348.5) = 3 28 11.00 31 17 29.5
  Extent = 5.4 (4.8-6.1)", rotation angle = 0
  Source counts = 211.5 +/- 24.8
  Background counts = 403.2
  Rate = 0.004 +/- 0.0005
[Thu May  2 10:13:03 2013] Spatial fit model total counts = 571.616000, observed total counts = 560.000000
[Thu May  2 10:13:03 2013] Offset between fit and detection position for source 28 = 0.187768 pixels
[Thu May  2 10:13:03 2013] Warning, changing simple spatial fit ID from 9 to 37
[Thu May  2 10:13:03 2013] 571.227000 total counts/ 371.899000 bgd. counts: snr = 10.336079
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.187768 pixels
  Position = (461.5, 348.7) = 3 28 10.97 31 17 30.2
  Extent = 7.9 (6.1-9.9)" x 4.2 (3.5-5.0)", rotation angle = 90
  Source counts = 199.3 +/- 23.9
  Background counts = 371.9
  Rate = 0.004 +/- 0.0005
[Thu May  2 10:13:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:03 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:03 2013] Source does appear to be extended
[Thu May  2 10:13:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Thu May  2 10:13:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:20 2013] Initial guess for spatial extent in simple fitting = 6.09"
[Thu May  2 10:13:20 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.831
[Thu May  2 10:13:20 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 6.09"
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src9.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src9.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src9.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May  2 10:13:21 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu May  2 10:13:33 2013] Spatial fit model total counts = 551.036000, observed total counts = 534.000000
[Thu May  2 10:13:33 2013] Offset between fit and detection position for source 28 = 0.190560 pixels
[Thu May  2 10:13:33 2013] 549.108000 total counts/ 336.586000 bgd. counts: snr = 11.583929
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.190560 pixels
  Position = (461.3, 348.5) = 3 28 11.00 31 17 29.5
  Extent = 5.3 (4.8-6.1)", rotation angle = 0
  Source counts = 212.5 +/- 23.4
  Background counts = 336.6
  Rate = 0.004 +/- 0.0005
[Thu May  2 10:13:33 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:33 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:33 2013] Source does appear to be extended
[Thu May  2 10:13:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 10:14:01 2013] XMMSAS src. selection expression = ellipse(40088.635200, 30270.990200, 319.406409, 319.406409, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Not overwriting source region fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_src.reg
[Thu May  2 10:14:01 2013] Extracting stamp from image fullrun_mos1_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (443, 330) - (480, 367)
[Thu May  2 10:14:01 2013] XMMSAS bgd. selection expression = annulus(40088.635200, 30270.990200, 532.344015, 1064.688031, X, Y) && !ellipse(41118.308000, 29117.822000, 2041.336059, 2041.336059, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Writing fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28.gif
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0065820101/products/events/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Thu May  2 10:14:02 2013] Mean detx,y = (6880.82, 10924.72) 
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_src.img and ../../xmm0065820101/products/images/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0065820101/products/spectra/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Thu May  2 10:14:02 2013] Setting source spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu May  2 10:14:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu May  2 10:14:02 2013] ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0065820101/products/lightcurves/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Thu May  2 11:01:09 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:09 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 266.00
[Thu May  2 11:01:09 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 115.00
[Thu May  2 11:01:09 2013] Got source and background scale factors 323200.000000, 920000.000000
[Thu May  2 11:01:09 2013] User source parameters:
  Position = (461.3, 348.5) = 3 28 11.00 31 17 29.5
  Extent = 5.3 (4.8-6.1)", rotation angle = 0
  Source aperture counts = 225.6 +/- 17.3
  Background aperture counts = 40.4
  Rate = 0.004 +/- 0.0003

[Thu May  2 11:01:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:12 2013] Using photon index=1.80, rate=0.00423, arf fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28.arf
[Thu May  2 11:01:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:12 2013] Updating source flux to 1.1e-13
[Thu May  2 11:01:28 2013] xmm0065820101/analysis//spectral/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete