[Thu May  2 10:12:26 2013] Detection parameters:
  Position = (366.1, 349.7) = 3 28 43.32 31 17 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 370.1 +/- 24.1
  Background counts = 30.8
  Rate = 0.009 +/- 0.0006

[Thu May  2 10:12:26 2013] Off-axis axis estimate = 6.16'
[Thu May  2 10:12:50 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Thu May  2 10:12:50 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Thu May  2 10:12:50 2013] source mask rpix=2.2, npix_max = 28, mask sum = 22, frac = 0.763
[Thu May  2 10:12:50 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.51"
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src15.ximg exists
[Thu May  2 10:12:50 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May  2 10:12:50 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_src15 appears to have run properly
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May  2 10:12:51 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May  2 10:12:51 2013] Fit fullrun_mos1_xmm0065820101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu May  2 10:13:03 2013] Spatial fit model total counts = 613.170000, observed total counts = 576.000000
[Thu May  2 10:13:03 2013] Offset between fit and detection position for source 25 = 0.206616 pixels
[Thu May  2 10:13:03 2013] 611.650000 total counts/ 381.291000 bgd. counts: snr = 11.797145
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.206616 pixels
  Position = (366.0, 349.5) = 3 28 43.37 31 17 34.7
  Extent = 5.3 (4.5-6.1)" x 4.1 (3.6-4.9)", rotation angle = 213 (2-336) degrees
  Source counts = 230.4 +/- 24.7
  Background counts = 381.3
  Rate = 0.005 +/- 0.0005
[Thu May  2 10:13:03 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:03 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:03 2013] Source does appear to be extended
[Thu May  2 10:13:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Thu May  2 10:13:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 10:13:20 2013] Initial guess for spatial extent in simple fitting = 4.69"
[Thu May  2 10:13:20 2013] source mask rpix=1.1, npix_max = 9, mask sum = 11, frac = 1.103
[Thu May  2 10:13:20 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 4.69"
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src15.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src15.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src15.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May  2 10:13:21 2013] fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu May  2 10:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May  2 10:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0065820101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 10:13:33 2013] Warning, spatial fit 15 centroid is now closest to src. 27
[Thu May  2 10:13:33 2013] Vigneting correction estimate = 1.000000
[Thu May  2 10:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 10:13:33 2013] Assessing source extent using major axis lower bound
[Thu May  2 10:13:33 2013] Source does appear to be extended
[Thu May  2 10:13:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Thu May  2 10:14:01 2013] XMMSAS src. selection expression = ellipse(31791.262060, 30362.290000, 316.321809, 247.064407, 212.836000, X, Y)
[Thu May  2 10:14:01 2013] Not overwriting source region fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src25_src.reg
[Thu May  2 10:14:01 2013] Extracting stamp from image fullrun_mos1_xmm0065820101_pi300-10000_cl_sm2.00.img.gz, (348, 331) - (384, 368)
[Thu May  2 10:14:01 2013] XMMSAS bgd. selection expression = annulus(31791.262060, 30362.290000, 527.203015, 1054.406030, X, Y) && !ellipse(33452.550812, 30386.838928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31058.752000, 29248.942800, 406.468012, 406.468012, 0.000000, X, Y)
[Thu May  2 10:14:01 2013] Writing fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src25.gif
[Thu May  2 10:15:16 2013] Mean detx,y = (4558.75, 2969.59) 
[Thu May  2 10:15:16 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 10:15:21 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 10:15:21 2013] Setting source spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu May  2 10:15:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu May  2 11:01:10 2013] Updating aperture counts using extracted products
[Thu May  2 11:01:10 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 279.00
[Thu May  2 11:01:10 2013] Total counts from fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src25_bgd.pi.gz = 329.00
[Thu May  2 11:01:10 2013] Got source and background scale factors 234152.000000, 2148980.000000
[Thu May  2 11:01:10 2013] User source parameters:
  Position = (366.0, 349.5) = 3 28 43.37 31 17 34.7
  Extent = 5.3 (4.5-6.1)" x 4.1 (3.6-4.9)", rotation angle = 213 (2-336) degrees
  Source aperture counts = 243.2 +/- 17.7
  Background aperture counts = 35.8
  Rate = 0.005 +/- 0.0004

[Thu May  2 11:01:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 11:01:13 2013] Using photon index=1.80, rate=0.00458, arf fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src25.arf
[Thu May  2 11:01:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 11:01:13 2013] Updating source flux to 7.6e-14
[Thu May  2 11:01:28 2013] xmm0065820101/analysis//spectral/fullrun_mos1_xmm0065820101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete